Product Description
Product Description
Product Application
Spider Crane are suitable for cargo handling in the transportation industry, material movement in the construction industry, and heavy equipment assembly in the manufacturing industry. It is especially effective for operation in narrow spaces. It can be used in installing glass curtain wall, petrochemical pipes, railway construction, machine inspection and maintenance in workshop, electric power construction or municipal construction.
Product Features
1. 380V power supply can achieve no noise, environmental protection and quiet.
2. Easy to transport forklift, crane with plug position.
3. Interlock system: after the boom is reset, the outriggers can be operated and travel to protect the safety of the crane.
4. U-shape boom: reasonable structure, 1 welding seam, large contact area between booms, high strength and long life.
5. Outrigger by remote control: can be controlled at close range to avoid accidents when the outriggers cannot be seen during operations in complex environments.
6. Moment limiter: accurately display the weight of the object to be hoisted. When hoisting, make sure to have a “number” in mind to protect the safety of the boom.
7. Proportional remote control, proportional solenoid valve:can control the hoist from a long distance and can make the hoisted weight move gradually. It is especially suitable for mechanical installation and used in places with high position accuracy requirements.
8. One-key leveling of outriggers: can be operated individually according to the surrounding environment, or the computer can be used to control 4 outriggers at the same time to achieve one-key leveling, so that the car body is always in a horizontal state.
Product Parameters
EW3.0 Spider Crane Technical Parameter | ||||
Model: EW3.0 Spider Crane |
Specification: 3t×1.3m |
|||
Maximum lifting torque: 53kN·m |
Maximum ground lifting height: 9.7m |
|||
Lifting speed of hook: 5.5m/min (4 times) |
Wire rope specifications: φ8×55 |
|||
Boom form: five-section boom |
Maximum Boom length: 9m |
|||
Luffing angle: 0-75° |
Rotation angle: 360°full rotation |
|||
Outrigger form:First stage:automatic;second stage:manually adjusted |
Maximum extension distance:(Front)3170×(Horizontal)3600×(Back)4050 |
|||
Walking mode:Hydraulic motor drives the reducer to travel |
Walking speed: 0-2.5km/h |
|||
Walking device: crawler synthetic rubber |
Climbing ability: 33% |
|||
Working pressure: 18MPa |
Hydraulic oil tank volume:38L |
|||
Overall size: 2940×950×1600 (mm) |
Machine weight: 2300kg |
EW5.0 Spider Crane Technical Parameter |
||||
Model: EW5.0 Spider Crane |
Specification: 5t×1.8m |
|||
Maximum operating radius: 16m |
Maximum ground lifting height: 16.9m |
|||
Lifting speed of hook:10m/min (4 times) |
Wire rope diameter and length: Φ10mm×80m |
|||
Boom form: five-section boom |
Boom length: 16.6m |
|||
Boom angle: 0-80° |
Rotation angle: 360°continuous rotation |
|||
Maximum extension distance: |
Outrigger form: frog style |
|||
Walking mode:hydraulic walking |
Walking speed: 0-3km/h |
|||
Walking device: crawler synthetic rubber |
Climbing ability: 32% |
|||
Ground pressure: 41.3kPa |
Hydraulic oil tank volume:38L |
|||
Overall size: 5000×1370×1980 (mm) |
Machine weight: 5500kg |
EW8.0 Spider Crane Technical Parameter |
||||
Model: EW8.0 Spider Crane |
Specification: 8t×2.5m |
|||
Maximum operating radius: 15.7m |
Maximum ground lifting height: 17.8m |
|||
Lifting speed of hook:10m/min (4 ropes) |
Wire rope diameter and length: Φ12mm×120m |
|||
Boom form: Five-section boom |
Boom length: 4.65m-16.4m |
|||
Boom angle/time: 0-80°/24.5sec |
Rotation angle: 0-360°continuous rotation |
|||
Outrigger form: Manually adjustment for 1 section. Automatic for the 2,3 section |
Maximum extension amplitude: |
|||
Walking mode:Hydraulic motor |
Walking speed: 0-1.5km/h |
|||
Staring Method:electrical starting |
Climbing ability: 20° |
|||
Ground Pressure:49kPa |
Ground Length×Width:1720×320mm |
|||
Overall size: 5033×1560×2278 (mm) |
Machine weight: 6500kg |
EW12.0 Spider Crane Technical Parameter |
||||
Model: EW12.0 Spider Crane |
Specification: 12t |
|||
Maximum operating radius: 19.8m |
Maximum ground lifting height: 21m |
|||
Lifting speed of hook:11m/min (4 times) |
Wire rope diameter and length: Φ14mm×80m |
|||
Boom form: six-section boom |
Boom length: 5.7m-19.8m |
|||
Boom angle/time: 0-78°/13sec |
Rotation angle/speed: 0-360°continuous rotation/38sec |
|||
Outrigger form: Manually unscrew + hydraulic expansion + automatic support (two sections) |
Maximum extension amplitude: |
|||
Walking mode:Hydraulic motor drive |
Walking speed: 0-2.5km/h |
|||
Staring Method:electrical starting |
Climbing ability: 20°(36%) |
|||
Startup performance: -5°C-40°C |
Eternalwin size:3200×400mm |
|||
Overall size: 5700×1800×2400 (mm) |
Machine weight: 11500kg |
Company Profile
FAQ
1. What after-sale service do you provide?
We have professional sales team and technical team for all customer. We can serve 24 hours a day for you.
2. What payment methods do you support?
We have many kinds of payment for your reference ,such as Western Union, Paypal, L/C, T/T and so on.
3. How to delivery the goods?
We often shipment goods by sea,which is cheaper than by air. It depends on your specific requirement.
4. What is your warranty service about machine?
Our machine has 1 year warranty time, and our engineering team available for oversea service with crane installation, inspection and commissioning.
5. What is your trade terms?
We have EXW, FOB, CIF, CFR for you to choose, and we can change according to your requirements.
6.Why should I choose your products?
We can provide high quality and low price products for you.
US $15,000-35,000 / Piece | |
1 Piece (Min. Order) |
###
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
---|
###
After-sales Service: | Support |
---|---|
Max. Lifting Height: | 21m |
Rated Loading Capacity: | 12t |
###
Customization: |
Available
|
---|
###
EW3.0 Spider Crane Technical Parameter | ||||
Model: EW3.0 Spider Crane
|
Specification: 3t×1.3m
|
|||
Maximum lifting torque: 53kN·m
|
Maximum ground lifting height: 9.7m
|
|||
Lifting speed of hook: 5.5m/min (4 times)
|
Wire rope specifications: φ8×55
|
|||
Boom form: five-section boom
|
Maximum Boom length: 9m
|
|||
Luffing angle: 0-75°
|
Rotation angle: 360°full rotation
|
|||
Outrigger form:First stage:automatic;second stage:manually adjusted
|
Maximum extension distance:(Front)3170×(Horizontal)3600×(Back)4050
|
|||
Walking mode:Hydraulic motor drives the reducer to travel
|
Walking speed: 0-2.5km/h
|
|||
Walking device: crawler synthetic rubber
|
Climbing ability: 33%
|
|||
Working pressure: 18MPa
|
Hydraulic oil tank volume:38L
|
|||
Overall size: 2940×950×1600 (mm)
|
Machine weight: 2300kg
|
###
EW5.0 Spider Crane Technical Parameter
|
||||
Model: EW5.0 Spider Crane
|
Specification: 5t×1.8m
|
|||
Maximum operating radius: 16m
|
Maximum ground lifting height: 16.9m
|
|||
Lifting speed of hook:10m/min (4 times)
|
Wire rope diameter and length: Φ10mm×80m
|
|||
Boom form: five-section boom
|
Boom length: 16.6m
|
|||
Boom angle: 0-80°
|
Rotation angle: 360°continuous rotation
|
|||
Maximum extension distance:
(front) 5170* (horizontal) 5807* (rear) 5423mm |
Outrigger form: frog style
|
|||
Walking mode:hydraulic walking
|
Walking speed: 0-3km/h
|
|||
Walking device: crawler synthetic rubber
|
Climbing ability: 32%
|
|||
Ground pressure: 41.3kPa
|
Hydraulic oil tank volume:38L
|
|||
Overall size: 5000×1370×1980 (mm)
|
Machine weight: 5500kg
|
###
EW8.0 Spider Crane Technical Parameter
|
||||
Model: EW8.0 Spider Crane
|
Specification: 8t×2.5m
|
|||
Maximum operating radius: 15.7m
|
Maximum ground lifting height: 17.8m
|
|||
Lifting speed of hook:10m/min (4 ropes)
|
Wire rope diameter and length: Φ12mm×120m
|
|||
Boom form: Five-section boom
|
Boom length: 4.65m-16.4m
|
|||
Boom angle/time: 0-80°/24.5sec
|
Rotation angle: 0-360°continuous rotation
|
|||
Outrigger form: Manually adjustment for 1 section. Automatic for the 2,3 section
|
Maximum extension amplitude:
(front) 5510* (horizontal) 5670* (rear) 5030mm |
|||
Walking mode:Hydraulic motor
|
Walking speed: 0-1.5km/h
|
|||
Staring Method:electrical starting
|
Climbing ability: 20°
|
|||
Ground Pressure:49kPa
|
Ground Length×Width:1720×320mm
|
|||
Overall size: 5033×1560×2278 (mm)
|
Machine weight: 6500kg
|
###
EW12.0 Spider Crane Technical Parameter
|
||||
Model: EW12.0 Spider Crane
|
Specification: 12t
|
|||
Maximum operating radius: 19.8m
|
Maximum ground lifting height: 21m
|
|||
Lifting speed of hook:11m/min (4 times)
|
Wire rope diameter and length: Φ14mm×80m
|
|||
Boom form: six-section boom
|
Boom length: 5.7m-19.8m
|
|||
Boom angle/time: 0-78°/13sec
|
Rotation angle/speed: 0-360°continuous rotation/38sec
|
|||
Outrigger form: Manually unscrew + hydraulic expansion + automatic support (two sections)
|
Maximum extension amplitude:
Left and right (7400mm) before and after (8190mm) |
|||
Walking mode:Hydraulic motor drive
|
Walking speed: 0-2.5km/h
|
|||
Staring Method:electrical starting
|
Climbing ability: 20°(36%)
|
|||
Startup performance: -5°C-40°C
|
Eternalwin size:3200×400mm
|
|||
Overall size: 5700×1800×2400 (mm)
|
Machine weight: 11500kg
|
US $15,000-35,000 / Piece | |
1 Piece (Min. Order) |
###
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
---|
###
After-sales Service: | Support |
---|---|
Max. Lifting Height: | 21m |
Rated Loading Capacity: | 12t |
###
Customization: |
Available
|
---|
###
EW3.0 Spider Crane Technical Parameter | ||||
Model: EW3.0 Spider Crane
|
Specification: 3t×1.3m
|
|||
Maximum lifting torque: 53kN·m
|
Maximum ground lifting height: 9.7m
|
|||
Lifting speed of hook: 5.5m/min (4 times)
|
Wire rope specifications: φ8×55
|
|||
Boom form: five-section boom
|
Maximum Boom length: 9m
|
|||
Luffing angle: 0-75°
|
Rotation angle: 360°full rotation
|
|||
Outrigger form:First stage:automatic;second stage:manually adjusted
|
Maximum extension distance:(Front)3170×(Horizontal)3600×(Back)4050
|
|||
Walking mode:Hydraulic motor drives the reducer to travel
|
Walking speed: 0-2.5km/h
|
|||
Walking device: crawler synthetic rubber
|
Climbing ability: 33%
|
|||
Working pressure: 18MPa
|
Hydraulic oil tank volume:38L
|
|||
Overall size: 2940×950×1600 (mm)
|
Machine weight: 2300kg
|
###
EW5.0 Spider Crane Technical Parameter
|
||||
Model: EW5.0 Spider Crane
|
Specification: 5t×1.8m
|
|||
Maximum operating radius: 16m
|
Maximum ground lifting height: 16.9m
|
|||
Lifting speed of hook:10m/min (4 times)
|
Wire rope diameter and length: Φ10mm×80m
|
|||
Boom form: five-section boom
|
Boom length: 16.6m
|
|||
Boom angle: 0-80°
|
Rotation angle: 360°continuous rotation
|
|||
Maximum extension distance:
(front) 5170* (horizontal) 5807* (rear) 5423mm |
Outrigger form: frog style
|
|||
Walking mode:hydraulic walking
|
Walking speed: 0-3km/h
|
|||
Walking device: crawler synthetic rubber
|
Climbing ability: 32%
|
|||
Ground pressure: 41.3kPa
|
Hydraulic oil tank volume:38L
|
|||
Overall size: 5000×1370×1980 (mm)
|
Machine weight: 5500kg
|
###
EW8.0 Spider Crane Technical Parameter
|
||||
Model: EW8.0 Spider Crane
|
Specification: 8t×2.5m
|
|||
Maximum operating radius: 15.7m
|
Maximum ground lifting height: 17.8m
|
|||
Lifting speed of hook:10m/min (4 ropes)
|
Wire rope diameter and length: Φ12mm×120m
|
|||
Boom form: Five-section boom
|
Boom length: 4.65m-16.4m
|
|||
Boom angle/time: 0-80°/24.5sec
|
Rotation angle: 0-360°continuous rotation
|
|||
Outrigger form: Manually adjustment for 1 section. Automatic for the 2,3 section
|
Maximum extension amplitude:
(front) 5510* (horizontal) 5670* (rear) 5030mm |
|||
Walking mode:Hydraulic motor
|
Walking speed: 0-1.5km/h
|
|||
Staring Method:electrical starting
|
Climbing ability: 20°
|
|||
Ground Pressure:49kPa
|
Ground Length×Width:1720×320mm
|
|||
Overall size: 5033×1560×2278 (mm)
|
Machine weight: 6500kg
|
###
EW12.0 Spider Crane Technical Parameter
|
||||
Model: EW12.0 Spider Crane
|
Specification: 12t
|
|||
Maximum operating radius: 19.8m
|
Maximum ground lifting height: 21m
|
|||
Lifting speed of hook:11m/min (4 times)
|
Wire rope diameter and length: Φ14mm×80m
|
|||
Boom form: six-section boom
|
Boom length: 5.7m-19.8m
|
|||
Boom angle/time: 0-78°/13sec
|
Rotation angle/speed: 0-360°continuous rotation/38sec
|
|||
Outrigger form: Manually unscrew + hydraulic expansion + automatic support (two sections)
|
Maximum extension amplitude:
Left and right (7400mm) before and after (8190mm) |
|||
Walking mode:Hydraulic motor drive
|
Walking speed: 0-2.5km/h
|
|||
Staring Method:electrical starting
|
Climbing ability: 20°(36%)
|
|||
Startup performance: -5°C-40°C
|
Eternalwin size:3200×400mm
|
|||
Overall size: 5700×1800×2400 (mm)
|
Machine weight: 11500kg
|
CZPT(R) Tolerance Ring For Limiter Torque
Using a limiter torque ring to limit the torque of the motor is an excellent method to maintain the smoothness and efficiency of the engine. It can also help to eliminate wear and tear on the engine due to over-revving or under-revving of the engine.
CZPT(r) Tolerance Ring
CZPT(r) Tolerance Ring is designed to limit limiter torque by providing interference fit between an inner component and an outer component. The tolerance ring is installed between a stator or compressor housing and an inner component, for example, a shaft receivable in a bore in the housing. The tolerance ring is formed of a resilient material such as spring steel.
The tolerance ring may have an outer and an inner circumference. The outer circumference may be smaller than the inner circumference and may be less than 16 mm in diameter. The tolerance ring may be formed from a sheet material. The thickness of the sheet may be less than 0.2 mm.
The tolerance ring may also include a sidewall. The sidewall includes an undeformed portion. The sidewall may be curved to form an annular ring. The tolerance ring may include one or more rows of wave structures. The wave structures may vary in shape and size, and may be located peripherally or radially around the tolerance ring.
The number of wave structures may vary, from less than 10 to more than 35. The number of wave structures may be located at the peripheral, radial, and end regions of the tolerance ring. The wave structures may be identical in size and shape, or may have different physical characteristics. The amount of torque transmitted by the tolerance ring is dependent on the stiffness of the projections. The tolerance ring can act as a force limiter or torque transmitter.
The tolerance ring may be a single-layer ring, or a two-layer ring. The first layer may be a strip or sleeve of resilient material. The second layer may be a smooth, regular surface. The first layer may be radially extending projections, a set of axially spaced protuberances, or a plurality of rounded ridges rising to a radial peak.
CZPT TL
TL series torque converters are a good fit for a variety of applications. These products deliver a slew of benefits including a long service life and a reduced component count. They are available in several configurations including semi-open and enclosed models. They also feature air control to ensure smooth device function. The TL series is also available in multiple torque capacities ranging from a low of 1,500 lb. @ 80 psi to a high of 27,700 lb. @ 80 psi.
The TL series is equipped with several technological feats including a proximity sensor that sends a signal to a torque limiter control valve. This unit also features a single and double air pressure circuit to ensure smooth remote torque adjustment. It also features an o-ring to ensure zero air leakage.
The TL-A Series is available in sixteen models, including two with an impressive 27700 lb. @ 80 psi torque. It’s also worth noting that they can be installed in a variety of applications, including conveyors, sheet metal processing equipment, printing and converting machines and industrial robots. They are also easy to install and remove, making them a great choice for maintenance departments.
The TL-A Series also offers a number of high-end features such as a reversible shaft design and internal springs to ensure complete disengagement. They also include a hard-chrome detent interface that decreases drive-ring wear. The TL-A Series also features a single-flex coupling that delivers high shaft misalignment protection and a double-flex coupling that delivers high torsional rigidity.
TL Series torque converters are a good fit for applications that require torque in the sub-tens of thousands of pounds per square inch. They are also a good choice for industrial automation applications and can be installed in a wide variety of industries, including manufacturing, aerospace and automotive.
IWIS FT series
FT IWIS’s FT-1000 Series aka FT IWIS’s FT t1000 series aka the FT t1000 series aka the TFT-1000 series aka the FT t1000 aka the FT t1000 FT t1000 series aka the FFT1000 series aka the FFT1000 FT t1000 aka the FFT1000 series aka FT t1000 FT t1000 FT t1000?. The FT t1000 series aka the, FT t1000 series aka the, FFT t1000 series aka the, FFT t1000 series aka FT t1000 series aka the, etc.. FT t1000 series aka the,, FFT t1000 series aka FFT t1000 series aka the FFT t1000 series aka the,.. FFT t1000 series aka the,, FT t1000 series aka FFT, FT t1000 series aka FT, FT t1000 series TA t1000 series aka the FFT, FT t1000 series, FT t1000 series aka, FFT t1000 series aka, FFT, FT t1000 series, etc.
TL-IT inline
TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.
editor by czh 2022-11-24