Product Description
Main Products
Product Description
Please contact us for discount
HEHI factory ratio remote control 8ton 10ton 12ton 14ton straight arm truck-mounted crane with torque limiter is a device that uses a hydraulic lifting and telescopic system to lift, rotate, and lift goods, usually assembled on a cargo truck. It generally consists of a truck chassis, cargo compartment, power take-off, and crane.
| HEHI factory ratio remote control 8ton 10ton 12ton 14ton straight arm truck-mounted crane with torque limiter |
HEHI factory ratio remote control 8ton 10ton 12ton 14ton straight arm truck-mounted crane with torque limiter
HEHI factory ratio remote control 8ton 10ton 12ton 14ton straight arm truck-mounted crane with torque limiter
Product Details
U shaped main boom :
1. The U-shaped arm adopts an optimized multi section arc arm system, which has a large cross-sectional modulus, strong bearing capacity, good stability, and can significantly reduce the weight of the crane under the same bearing capacity conditions, meeting the requirements of lightweight.
2. The U-shaped arm is easy to use and has strong adaptability to comprehensive performance and working conditions. The appearance is beautiful and fashionable, better interpreting the production and manufacturing concepts of safety, environmental protection, and reliability. It has the advantages of being lighter, safer, more high-end, more environmentally friendly, and more functional
Rope release method:
There are 2 ways to rope out: inner rope out and outer rope out. Made according to customer requirements
Before operating the crane, it is necessary to inspect the rope clamp of the steel wire rope. Firstly, check whether the rope clamp for fixing the steel wire rope is secure and whether the steel wire rope is in the groove. When the steel wire rope is twisted, creased, worn, severely corroded, more than 10% of the steel wire is broken or the diameter is reduced by more than 7%, or discolored due to overheating, the steel wire rope should be replaced.
Hydraulic Oil Cylinder:
The extension and bending of the on-board crane are mainly due to the action of the oil cylinder.
There are single cylinder and double cylinder oil cylinders
There is a balance valve between the telescopic rods to ensure the sequence of boom extension and contraction
The raw materials of the oil cylinder barrel are subjected to quenching and tempering treatment, resulting in strong tensile strength
The piston rod is based on quenching and tempering, and the outer circle is coated with hard chromium to improve rust prevention and wear resistance
The sealing components adopt high standards that are suitable for the operating conditions of the host machine
High Quality Slewing Support:
Rotary bearings are also known as the “joints of machines”
Small tonnage truck mounted cranes use integrated slewing supports, while large tonnage cranes choose split slewing supports
Our crane can rotate 360 ° infinitely
Rear outrigger :
There are 3 forms of rear outrigger: fixed, single cavity, and double cavity
Customers can choose the appropriate rear leg according to their needs.
Product Parameters
Loading Chart for HEHI factory ratio remote control 8ton 10ton 12ton 14ton straight arm truck-mounted crane with torque limiter
(only for reference,we accept customization)
Specifications for HEHI factory ratio remote control 8ton 10ton 12ton 14ton straight arm truck-mounted crane with torque limiter
(only for reference,we accept customization)
| Model | SQ5T | |||
| Max lifting capacity(T) | 5T | |||
| Cross-sections | U | Swing Mechanism | Slewing speed (r/min) | 1 |
| Sections | 4 (Extend 3) | |||
| Basic boom length (m) | 3.85 | Slewing angle | 360° continuous | |
| Max working radius(m) | 10.2 | Leg | Type | Hydraulic cylinder |
| Max lifting height(m) | 11.5 | Span | 4.67 | |
| Extended speed (m/s) | 0.1 | Hydraulic system | Oil Pump | 40 Single |
| Luffing Range(O) | 74 | System rated pressure (Mpa) | 20 | |
Packaging & Shipping
Package : Nude package/plastic /plywood box ,which is based on the quantity client orders .
Company Profile
ZheJiang Hehi Machinery Co., Ltd. is a high-tech enterprise specializing in the research, development, production, and sales of hydraulic machinery products such as truck mounted cranes, truck cranes, aerial work vehicles, ship cranes, and port crane ects. For more than 20 years since its establishment, we have always believed that products are human qualities. Adhering to the principles of high standards, strict requirements, refinement, and zero defects, our production and sales have been recognized by users all over the country. In order to meet market demand, the company has invested millions of yuan to purchase a large number of advanced production equipment, high-efficiency intelligent manufacturing, and create excellent products.
Hehi has high-end technical talents, a high-quality work team, and advanced production equipment both domestically and internationally, which can provide customers with precise products and comprehensive services in a timely manner “Professional qualifications and brand building” is the business goal of Hehi Excellent quality, Reliance on price “This is the business purpose of the enterprise. Hehi has a huge advantage and influence in the field of hydraulic lifting machinery with talents, resources, and experience, becoming a new enterprise with high competitiveness and priority advantages. Our company strives for survival through quality, development through service, and always adheres to the principle of valuing contracts and keeping promises. We welcome new and old customers to come and purchase our equipment at a good price! The company does its best to make customers feel that purchasing products is a friendly experience.” Cut, a pleasant experience!
Welcome to our factory !
FAQ
1. How to get your quotation ?
Please provide your requirements :
1).Max Lifting capacity ? (kg or t)
2).Working Radius (m)
3).Quantity
2. Can you accept customization ?
Yes ,of course . We can manufacture the crane according to customers’ requirement
3. Delivery time : Normally 1 week after your payment .It depends on the quantity you order.
4. Can you delivery the crane to customers’ country directly ?
Yes ,of course .Only let us know your destination port ,then we will arrange to delivery.
5. Can customer make payment by trade assurance?
Yes ,of course
6. Can customer visit your factory ?
Yes ,very welcome to our factory
7. Payment terms : L/C ,T/T,Cash,WU,MG ects
/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
What factors influence the design and tooling of injection molded parts for specific applications?
Several factors play a crucial role in influencing the design and tooling of injection molded parts for specific applications. The following are key factors that need to be considered:
1. Functionality and Performance Requirements:
The intended functionality and performance requirements of the part heavily influence its design and tooling. Factors such as strength, durability, dimensional accuracy, chemical resistance, and temperature resistance are essential considerations. The part’s design must be optimized to meet these requirements while ensuring proper functionality and performance in its intended application.
2. Material Selection:
The choice of material for injection molding depends on the specific application and its requirements. Different materials have varying properties, such as strength, flexibility, heat resistance, chemical resistance, and electrical conductivity. The material selection influences the design and tooling considerations, as the part’s geometry and structure must be compatible with the selected material’s properties.
3. Part Complexity and Geometry:
The complexity and geometry of the part significantly impact its design and tooling. Complex parts with intricate features, undercuts, thin walls, or varying thicknesses may require specialized tooling and mold designs. The part’s geometry must be carefully considered to ensure proper mold filling, cooling, ejection, and dimensional stability during the injection molding process.
4. Manufacturing Cost and Efficiency:
The design and tooling of injection molded parts are also influenced by manufacturing cost and efficiency considerations. Design features that reduce material usage, minimize cycle time, and optimize the use of the injection molding machine can help lower production costs. Efficient tooling designs, such as multi-cavity molds or family molds, can increase productivity and reduce per-part costs.
5. Moldability and Mold Design:
The moldability of the part, including factors like draft angles, wall thickness, and gate location, affects the mold design. The part should be designed to facilitate proper flow of molten plastic during injection, ensure uniform cooling, and allow for easy part ejection. The tooling design, such as the number of cavities, gate design, and cooling system, is influenced by the part’s moldability requirements.
6. Regulatory and Industry Standards:
Specific applications, especially in industries like automotive, aerospace, and medical, may have regulatory and industry standards that influence the design and tooling considerations. Compliance with these standards regarding materials, dimensions, safety, and performance requirements is essential and may impact the design choices and tooling specifications.
7. Assembly and Integration:
If the injection molded part needs to be assembled or integrated with other components or systems, the design and tooling must consider the assembly process and requirements. Features such as snap fits, interlocking mechanisms, or specific mating surfacescan be incorporated into the part’s design to facilitate efficient assembly and integration.
8. Aesthetics and Branding:
In consumer products and certain industries, the aesthetic appearance and branding of the part may be crucial. Design considerations such as surface finish, texture, color, and the inclusion of logos or branding elements may be important factors that influence the design and tooling decisions.
Overall, the design and tooling of injection molded parts for specific applications are influenced by a combination of functional requirements, material considerations, part complexity, manufacturing cost and efficiency, moldability, regulatory standards, assembly requirements, and aesthetic factors. It is essential to carefully consider these factors to achieve optimal part design and successful injection molding production.
What is the role of design software and CAD/CAM technology in optimizing injection molded parts?
Design software and CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) technology play a crucial role in optimizing injection molded parts. They provide powerful tools and capabilities that enable designers and engineers to improve the efficiency, functionality, and quality of the parts. Here’s a detailed explanation of the role of design software and CAD/CAM technology in optimizing injection molded parts:
1. Design Visualization and Validation:
Design software and CAD tools allow designers to create 3D models of injection molded parts, providing a visual representation of the product before manufacturing. These tools enable designers to validate and optimize the part design by simulating its behavior under various conditions, such as stress analysis, fluid flow, or thermal performance. This visualization and validation process help identify potential issues or areas for improvement, leading to optimized part designs.
2. Design Optimization:
Design software and CAD/CAM technology provide powerful optimization tools that enable designers to refine and improve the performance of injection molded parts. These tools include features such as parametric modeling, shape optimization, and topology optimization. Parametric modeling allows for quick iteration and exploration of design variations, while shape and topology optimization algorithms help identify the most efficient and lightweight designs that meet the required functional and structural criteria.
3. Mold Design:
Design software and CAD/CAM technology are instrumental in the design of injection molds used to produce the molded parts. Mold design involves creating the 3D geometry of the mold components, such as the core, cavity, runner system, and cooling channels. CAD/CAM tools provide specialized features for mold design, including mold flow analysis, which simulates the injection molding process to optimize mold filling, cooling, and part ejection. This ensures the production of high-quality parts with minimal defects and cycle time.
4. Design for Manufacturability:
Design software and CAD/CAM technology facilitate the implementation of Design for Manufacturability (DFM) principles in the design process. DFM focuses on designing parts that are optimized for efficient and cost-effective manufacturing. CAD tools provide features that help identify and address potential manufacturing issues early in the design stage, such as draft angles, wall thickness variations, or parting line considerations. By considering manufacturing constraints during the design phase, injection molded parts can be optimized for improved manufacturability, reduced production costs, and shorter lead times.
5. Prototyping and Iterative Design:
Design software and CAD/CAM technology enable the rapid prototyping of injection molded parts through techniques such as 3D printing or CNC machining. This allows designers to physically test and evaluate the functionality, fit, and aesthetics of the parts before committing to mass production. CAD/CAM tools support iterative design processes by facilitating quick modifications and adjustments based on prototyping feedback, resulting in optimized part designs and reduced development cycles.
6. Collaboration and Communication:
Design software and CAD/CAM technology provide a platform for collaboration and communication among designers, engineers, and other stakeholders involved in the development of injection molded parts. These tools allow for easy sharing, reviewing, and commenting on designs, ensuring effective collaboration and streamlining the decision-making process. By facilitating clear communication and feedback exchange, design software and CAD/CAM technology contribute to optimized part designs and efficient development workflows.
7. Documentation and Manufacturing Instructions:
Design software and CAD/CAM technology assist in generating comprehensive documentation and manufacturing instructions for the production of injection molded parts. These tools enable the creation of detailed drawings, specifications, and assembly instructions that guide the manufacturing process. Accurate and well-documented designs help ensure consistency, quality, and repeatability in the production of injection molded parts.
Overall, design software and CAD/CAM technology are instrumental in optimizing injection molded parts. They enable designers and engineers to visualize, validate, optimize, and communicate designs, leading to improved part performance, manufacturability, and overall quality.
Are there different types of injection molded parts, such as automotive components or medical devices?
Yes, there are various types of injection molded parts that are specifically designed for different industries and applications. Injection molding is a versatile manufacturing process capable of producing complex and precise parts with high efficiency and repeatability. Here are some examples of different types of injection molded parts:
1. Automotive Components:
Injection molding plays a critical role in the automotive industry, where it is used to manufacture a wide range of components. Some common injection molded automotive parts include:
- Interior components: Dashboard panels, door handles, trim pieces, instrument clusters, and center consoles.
- Exterior components: Bumpers, grilles, body panels, mirror housings, and wheel covers.
- Under-the-hood components: Engine covers, air intake manifolds, cooling system parts, and battery housings.
- Electrical components: Connectors, switches, sensor housings, and wiring harnesses.
- Seating components: Seat frames, headrests, armrests, and seatbelt components.
2. Medical Devices:
The medical industry relies on injection molding for the production of a wide range of medical devices and components. These parts often require high precision, biocompatibility, and sterilizability. Examples of injection molded medical devices include:
- Syringes and injection pens
- Implantable devices: Catheters, pacemaker components, orthopedic implants, and surgical instruments.
- Diagnostic equipment: Test tubes, specimen containers, and laboratory consumables.
- Disposable medical products: IV components, respiratory masks, blood collection tubes, and wound care products.
3. Consumer Products:
Injection molding is widely used in the production of consumer products due to its ability to mass-produce parts with high efficiency. Examples of injection molded consumer products include:
- Household appliances: Television and audio equipment components, refrigerator parts, and vacuum cleaner components.
- Electronics: Mobile phone cases, computer keyboard and mouse, camera components, and power adapters.
- Toys and games: Action figures, building blocks, puzzles, and board game components.
- Personal care products: Toothbrushes, razor handles, cosmetic containers, and hairdryer components.
- Home improvement products: Light switch covers, door handles, power tool housings, and storage containers.
4. Packaging:
Injection molding is widely used in the packaging industry to produce a wide variety of plastic containers, caps, closures, and packaging components. Some examples include:
- Bottles and containers for food, beverages, personal care products, and household chemicals.
- Caps and closures for bottles and jars.
- Thin-walled packaging for food products such as trays, cups, and lids.
- Blister packs and clamshell packaging for retail products.
- Packaging inserts and protective foam components.
5. Electronics and Electrical Components:
Injection molding is widely used in the electronics industry for the production of various components and enclosures. Examples include:
- Connectors and housings for electrical and electronic devices.
- Switches, buttons, and control panels.
- PCB (Printed Circuit Board) components and enclosures.
- LED (Light-Emitting Diode) components and light fixtures.
- Power adapters and chargers.
These are just a few examples of the different types of injection molded parts. The versatility of injection molding allows for the production of parts in various industries, ranging from automotive and medical to consumer products, packaging, electronics, and more. The specific design requirements and performance characteristics of each part determine the choice of materials, tooling, and manufacturing processes for injection molding.
<img src="https://img.hzpt.com/img/Injectionmoldedparts/Injectionmoldedparts-L1.webp" alt="China best Hehi Factory Ratio Remote Control 8ton 10ton 12ton 14ton Straight Arm Truck-Mounted Crane with Torque Limiter “><img src="https://img.hzpt.com/img/Injectionmoldedparts/Injectionmoldedparts-L2.webp" alt="China best Hehi Factory Ratio Remote Control 8ton 10ton 12ton 14ton Straight Arm Truck-Mounted Crane with Torque Limiter “>
editor by Dream 2024-10-12