We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears factory in China with 5 various branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
New Computerized Aluminum Foil Very hot Stamping Bronzing Printer Device
Movie: be/tnhthehN8mc
Characteristics:
The MHK-1050T/TC totally automated scorching stamping and die chopping machine can efficiently full the die reducing and stamping of merchandise, as properly as preserving the greatest precision and merchandise good quality. The MHK-1050T/TC entire-automatic very hot stamping equipment are properly geared up and practically can adapt to all very hot stamping demands of items.
one. High quality feeder made in ZheJiang with 4 suction nozzle for stack paper and 4 suction nozzle for offering paper , assures steady and rapidly paper feeding .
2. Pre-loading device , non-end feeding , with Max pile top to 1600mm.
3. The pre-loading unit is equipped with guiding rails , operator shift the stack paper to feeder correctly and conveniently .
4. Side and entrance guiding have sensor which can change the sensitivity.
5. The anti-obstacle device avoid the machine broken.
six. Paper feeding will be gradual down when the paper reach the front guiding , attain more exact place .
seven. Japanese NITA convey belt , the pace can be adjusted .
8. Germany made stainless steel is utilised for convey board in purchase to accomplish sleek and quick paper shipping .
nine. Pneumatic slicing plate carry for effortless slide in and out .
ten.Effortless way to flip more than and alter die chopping chase and plate with quick time .
11.Substantial high quality gripper bars created in Japan with prolonged daily life time .
12.Large high quality U.K imported chain make certain security and accuracy in extended time operating .
thirteen.Automatic lubrication and cooling program for primary drive and computerized lubrication for major chain .
fourteen.Overload safety unit with torque limiter in index box for the optimum protection of operator and gear .
15.Crank shafts and worm rod is manufactured of forty Cr with heating managing . Turbine is manufactured of copper .
sixteen.Large top quality imported air clutch .
seventeen.SMC pneumatic elements .
eighteen.The upper , center and reduce stripping frames are managed by 3 GPRS of cam wheels respectively.
19.Match with the centre-line registration method in die slicing device , the very same system also use to the stripping station to reduce changeover time , Accurate positioning can boost creation effectiveness.
A lot more Specifics:
Complex Parameter:
| Model | MHK-1050T/TC |
| Max Sheet dimensions | 1050*750 mm |
| Min Sheet dimensions | 400*360 mm |
| Max Die reduce size | 1040*720 mm |
| Max Sizzling stamping dimension | 1040*720mm |
| Internal chase dimensions | 1080*745mm |
| Paper thickness | 80-600g/m2 corrugated less than 4mm |
| Precision | significantly less than .1mm |
| Max. pressure | 300T |
| Max die reduce pace | 7500s/h |
| Max feeder pile height | 1600mm(consist of pallet) |
| Max assortment pile height | 1400mm(include pallet) |
| Max foil diameter | 250mm(vertical) 200mm(horizontal) |
| Foil width | twenty-1571 mm |
| Primary motor | 11Kw |
| General dimension | 7700*5200*2600mm |
| Equipment excess weight | 18.5 Tons |
| Complete electrical power | fifty two Kw |
Our Plant Look at:
Pac ept And Transport:
Clients And Exhibition:
FAQ
one. Q: What is your shipping term?
A: FOB,CIF,CFR usually.
two.Q: What is your payment?
A: T/T.30% deposit, 70% equilibrium prior to shipping.
L/C. a hundred% at sight.
T/T and L/C, 30% TT deposit, 70% L/C.
three.Q: What is your shipping time?
A: 30-50 times generally
4.Q: What is your guarantee and other conditions?
A: A single 12 months device guarantee,and entire existence technicalTorque limiters work either by slipping or completely disconnecting the drive from the pushed load. Some torque limiters of the previous variety (specially people using friction plates) are also called slip clutches. In other contexts, torque limiters are often referred to as overload clutches. assistance. Spare elements are totally free for buyer in 1 yr.
We can send our engineer to your factory for equipment set up and operator trainning if you need to have,
Customer pay the flight tickets,meals and lodge for our engineer.
Salary USD100.00 for each working day to our engineer.
The use of unique products manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our organization and the listed substitute components contained herein are not sponsored, authorized, or made by the OEM.
