We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
one. Mixers:
one.1 Automated Container Mixer
Automatic container mixer is wor ept with continuous material trolleys, the container fills the supplies and lifted up and connnected tightly with mixing head routinely. The mixing head tilts with each other with the containers, and then acquire the homogeneous mixing end result, soon after ending mixing as per setting time, and return to original place, the whole procedure will be managed by PLC
Main Features:
Many detachable containers for circular operation
Substantial performance
Adopting PLC to recognize automation
Homogenized combination
No curing granule
Practical for cleaning and maintenance
Safe and relaiable operation
TechnTorque limiters perform either by slipping or entirely disconnecting the drive from the driven load. Some torque limiters of the previous type (especially those utilizing friction plates) are also called slip clutches. In other contexts, torque limiters are occasionally referred to as overload clutches.ical Data:
Model | Volume (L) | Output (kg/tank) | Mixing Motor (kw) | Tilting Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | Control Mode | All round Dimensions (MM) |
FHJ-15 | 15 | eight | one.5 | five-10 | PLC | 750*480*950 | ||
FHJ-120 | 120 | 60 | five.five | .two | five-10 | PLC | 1800*1800*1950 | |
FHJ-150 | a hundred and fifty | 70 | 5.5 | .37 | 2.two | five-ten | PLC | 2150*1100*2300 |
FHJ-300 | three hundred | one hundred fifty | fifteen | three | 2.two | 5-10 | PLC | 2150*1100*2300 |
FHJ-600 | 600 | three hundred | 22 | 4 | four | 5-ten | PLC | 2650*1250*2700 |
FHJ-1000 | a thousand | 500 | thirty | four | 4 | 5-ten | PLC | 2900*1550*3100 |
FHJ-2000 | 2000 | 1000 | forty five | 5.five | 5.5 | 5-ten | PLC | 3500*2350*3650 |
1.2 High Velocity Pre-Mixer:
Characteristics:
Substantial efficiency & straightforward procedure
Effortless colour changing, protected cleansing
Combined mixing & crushing as a single
Mixing time preseting, short & homogeneous
Superb sealing, powder lea ept free of charge
Vertical or horizontal kind as optional
Technical Knowledge:
Product | Quantity (L) | Mixing Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | Overall Dimensions (mm) |
GHJ-twenty | twenty | .55 | .37 | 3-5 | seven-hundred*five hundred*800 |
GHJ-100 | 100 | 3 | one.five | three-5 | one thousand*600*900 |
GHJ-200 | 200 | 5.5 | three | three-five | 1500*900*1400 |
GHJ-300 | 300 | 7.5 | 4 | 3-6 | 1800*900*1400 |
GHJ-500 | 500 | 15 | five.5 | 4-six | 1800*1300*1800 |
GHJ-800 | 800 | eighteen.5 | 7.5 | 4-6 | 1900*1300*2000 |
GHJ-a thousand | a thousand | 22 | 7.five | four-6 | 2300*1400*2000 |
one.3 Double Cone Mixer:
This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This machine is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound components. It has outstanding influence in mixing powders and particles with fairly great fluidity. Its barrel is produced of stainless metal, which is polished the two inside and exterior, featuring beautiful visual appeal and effortless operation.
Technological Information:
Product | Volume (L) | Output (kg/tank) | Rotating Motor (kw) | Mixing Motor (kw) | Mixing Time (min) | All round Proportions (mm) |
SXH-a hundred | three hundred | one hundred fifty | 1.5 | 1.5 | -thirty | 1760*830*2030 |
SXH-two hundred | four hundred | 200 | 1.five | one.five | -thirty | 1830*830*2150 |
SXH-three hundred | 600 | three hundred | two.2 | one.five | -30 | 1980*one thousand*2275 |
SXH-500 | 1000 | five hundred | 4 | four | 1-thirty | 2630*1140*2620 |
SXH-one thousand | 2000 | 1000 | 5.five | 5.5 | -thirty | 3060*1440*2860 |
SXH-1500 | 3000 | 1500 | seven.five | 7.five | -30 | 3700*2000*2970 |
SXH-2000 | 4000 | 2000 | eight.5 | eight.5 | -30 | 3800*2500*3500 |
two. Twin-Screw Extruder
two.1 High torque & Large Pace Rotation Twin-Screw Extruder:
Primary Attributes:
*Complete Gearbox from specialist EPT maker, reduced sound, tough longevity
*High screw velocity, substantial shearing, fast discharge
*Unbiased lube oil cooling system design and style
*Torque limiter to protect the drive practice
*Suited for reclaim powder, unique powder manufacturing
*Break up design of barrel and liner inserts for effortless cleansing and maintainence
*Best & Side feeding possibilities
*Other functions same as standard variety extruder
Specialized Parameters:
Design | Capability (kg/h) | Screw Diameter (mm) | Screw Size (mm) | Screw Pace (r/min) | Major Motor (kw) | Feeder Motor (kw) | Heating Energy (kw) | General Proportions (mm) |
TSX-forty | eighty-260 | forty | 16D | -800 | 11/fifteen/18.5 | .55 | 8 | 1850*seven-hundred*1750 |
TSX-52 | a hundred and fifty-450 | 52 | 16D | -800 | 22/30/37 | .seventy five | ten | 2700*900*2200 |
TSX-65 | 400-a thousand | sixty five | 16D | -800 | forty five/55/seventy five | 1.1 | twelve | 2900*1000*2400 |
TSX-seventy five | 800-1200 | 75 | 16D | -800 | seventy five/ninety | 1.5 | 16 | 3100*1200*2500 |
TSX-85 | 1200-1800 | 85 | 16D | -800 | ninety/one hundred ten | two.two | 20 | 3700*1500*2900 |
2.2 Traditional Kind Co-Rotation Parallel Twin Screw Extruder
Characteristics:
*Powerful shearing, effortless cleansing
*Precise vehicle temperature manage, higher cooling & heating exchagne
*Hinged clamshell sort barrel opening, segmented liners for easy changing and cost conserving
*Feeder effortless assembly & disassembly, internal composition to steer clear of agglomeration
*Configurable screw utilized for defferent powder formulas
*Screw and barrel undertake special supplies like Cr12MoV, CPM, and many others., high putting on resisting
*Fairly gearbox with reduced sound dB stage
*Torque limiter to protect the generate prepare
*Reduced vitality intake
Technical Parameters:
Design | Capacity (kg/h) | Screw Diameter (mm) | Screw Duration | Screw Pace (r/min) | Main Motor (kw) | Feeder Motor (kw) | Heating Electricity (kw) | General Dimensions (mm) |
SLJ-40 | eighty-220 | 40 | 16D | -five hundred | 11/15/18.5 | .fifty five | 4 | 1800*600*1700 |
SLJ-50 | 150-three hundred | 50 | 16D | -500 | 22/30 | .75 | 8 | 2600*seven-hundred*2000 |
SLJ-fifty five | 300-400 | fifty five | 16D | -500 | 30/37 | .seventy five | 8 | 2700*900*2300 |
SLJ-sixty | 400-600 | sixty | 16D | -500 | forty five | one.1 | 12 | 2750*a thousand*2350 |
SLJ-75 | 600-800 | 75 | 16D | -five hundred | fifty five | one.5 | twelve | 2900*1100*2400 |
SLJ-eighty | 800-1200 | eighty | 16D | -500 | seventy five/90 | 2.two | twenty | 3700*800*2800 |
two.3 Lab Type Extruder
Complex Parameters:
Design | Potential (kg/h) | Screw Diameter (mm) | Screw Duration | Screw Pace (r/min) | Principal Motor (kw) | Feeder Motor (kw) | Heating Electrical power (kw) | Overall Proportions (mm) |
TSX-twenty | .2-ten | 22 | 16D | -600 | 2.2-4 | .one | two | 1600*three hundred*850 |
SLJ-thirty | 1-thirty | thirty | 16D | -five hundred | 3-5.five | .18 | 3.2 | 1430*550*1300 |
SLJ-32 | 40-eighty | 32 | 16D | -five hundred | 7.5/11 | .twenty five | three.2 | 1600*five hundred*1500 |
3 Cooling Belt
3.1 H2o Cooled Cooling Belt with Flaker:
Characteristics:
Constant quality imported steel belt
Base cooling h2o spraying system, installed heating and cooling gadget
Equipped with guidebook gadget to stay away from deforming
Greater cooling result, larger efficient efficiency
Few upkeep and effortless cleansing
Chips thickness and roller speed adjustable
Crusher with finger pin and enamel sort
Minimized cross contamination, basic procedure
Technological Parameters:
Model | Roller Dia. (mm) | Belt Width (mm) | Belt Size (mm) | Drive Motor (kw) | Ability (kg/h) | Cooling Method | Overall Dimensions (mm) |
GDY-406 | 220 | 600 | 4000 | 1.five | two hundred-four hundred | Cooled H2o | 4000*750*1600 |
GDY-508 | 325 | 800 | 5000 | three | four hundred-five hundred | Cooled H2o | 5000*900*1800 |
GDY-510 | 325 | one thousand | 5000 | 3 | five hundred-seven hundred | Cooled H2o | 5000*1100*1900 |
GDY-610 | 440 | a thousand | 6000 | 4 | 600-800 | Cooled Drinking water | 6000*1100*1900 |
GDY-612 | 440 | 1200 | 6000 | four | 700-900 | Cooled H2o | 6000*1400*1900 |
GDY-712 | 600 | one thousand | 7000 | five.5 | 900-1200 | Cooled Drinking water | 7000*1400*2000 |
3.2 Air Cooled Variety Caterpillar Cooling Belt with Flaker:
Functions:
Stainless metal made caterpillar, air cooling
Flake chips thichness and conveying velocity adjustable
Sensible layout for cooling rollers inside, specialist surface remedy to keep away from drinking water lea ept and rust
Put in with simplified air conditioning device
Secure procedure, like crisis button, clockwise and counter-clockwise rotation.
Complex Parameters:
Design | Roller Dia. (mm) | Belt Width (mm) | Belt Length (mm) | Drive Motor (kw) | Blower Motor (kw) | Ability (kg/h) | Cooling Mode | Total Proportions (mm) |
JFY-204 | one hundred sixty/160 | four hundred | 2000 | .fifty five | 200-400 | thirty-a hundred | Chilled Water&Air | 2000*450*900 |
JFY-406 | a hundred and sixty/220 | 600 | 4000 | .75 | four hundred-500 | 100-220 | Chilled H2o&Air | 4000*850*950 |
JFY-508 | a hundred and eighty/325 | seven hundred | 5000 | .seventy five | five hundred-seven hundred | 220-four hundred | Chilled H2o&Air | 5000*1050*1200 |
JFY-510 | one hundred eighty/325 | 800 | 5000 | one.one | 600-800 | 400-500 | Chilled Water&Air | 5000*1150*1200 |
JFY-610 | a hundred and eighty/325 | 800 | 6000 | one.one | 700-900 | five hundred-700 | Chilled Water&Air | 6000*1150*1200 |
JFY-710 | 180/325 | one thousand | 6000 | 1.five | 900-1200 | 600-900 | Chilled Water&Air | 7000*1250*1450 |
JFY-812 | one hundred eighty/325 | a thousand | 7000 | two.2 | 900-1200 | 900-1200 | Chilled Water&Air | 8000*1650*1600 |
3.3 PU Kind Air Cooled Cooling Belt
Characteristics:
Adjustable thichness and roller velocity
Air cooled to steer clear of cross contamination
Roller and crusher equipped with overload protection
Large efficiencies
One particular piece PU belt to faciliate simple cleansing and servicing
Compact style for constrained area
Specialized Parameters:
Product | Roll Dia. (mm) | Band Width (mm) | Band Size (mm) | Motor Electricity (kw) | Throughput (kg/h) | Proportions (mm) |
PFY-104 | 156 | four hundred | one thousand | 1.one | fifty | one thousand*870*1050 |
PFY-206 | 220 | 600 | 2000 | one.1 | one hundred fifty | 2000*1150*1100 |
PFY-208 | 445 | 800 | 2000 | two.2 | 300 | 2000*1100*1100 |
PFY-210 | 445 | 1000 | 2000 | 2.two | 500 | 2000*1300*1100 |
PFY-310 | 622 | 1000 | 3000 | two.2 | 800 | 2000*1300*1200 |
four ACM (Air Classifier Mill) Grinding Method
Characteristics:
Safety in accordance with EU explosion resistant common ATEX/PSR11
Reduced noise layout (from mill to fan system)
Particle dimensions distribution adjustable on ask for
Mill body temperature and air ingestion volume monitoring
Rotary sieve with exclusive style and sturdy for mesh use problem
Whole grinding program developed for powder dust free
Completed powder products with far more than ninety eight percent
Large output, straightforward operation cleaning and routine maintenance
Specialized Parameters:
Model | Mill Motor kw | Rotor rpm | Classifier Motor | Classifier rpm | Fan kw | Air cbm/h | Ability kg/h | General proportions mm |
ACM-02 | 2.2 | 12000 | .37 | -3000 | three | 350 | 2-30 | 1430*550*1300 |
ACM-05 | four | 11000 | .75 | -3000 | four | 800 | 30-80 | 2100*1000*2150 |
ACM-ten | 7.5 | 7000 | one.five | -3000 | eleven | 2500 | a hundred-260 | 6200*1250*3200 |
ACM-fifteen | 11 | 7000 | 1.five | -3000 | fifteen | 3000 | two hundred-350 | 6500*1300*3300 |
ACM-twenty | fifteen | 6600 | 2.2 | -3000 | 22 | 3500 | 300-400 | 7500*1300*3600 |
ACM-30 | 22 | 5500 | 3 | -3000 | 30 | 4500 | 400-550 | 7900*1500*3600 |
ACM-forty | 30 | 4600 | 5.5 | -3000 | 37 | 5500 | 600-800 | 8000*1700*3600 |
ACM-50 | 37 | 4000 | 7.five | -3000 | 45 | 6500 | 1000-1200 | 9000*1900*3900 |
ACM-60 | forty five | 3500 | seven.five | -3000 | fifty five | 8000 | 1200-1600 | 9000*2000*4000 |
Business:
Xihu (West Lake) Dis.sunshine is a major company in China of Powder Coating Creation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 a long time of encounters in this ept and have exported to practically 30 nations and locations in the past ten many years, and acquire commonly good reputations.
We passed CE certification acceptance and ATEX explosion resistant take a look at, etc. global specifications, we do know how to meet the diversified and customized produced requests of our customers.
Our eternal organization philosophy: consistant top quality, powerful interaction, accountable provider.
The use of first tools manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our firm and the detailed alternative areas contained herein are not sponsored, accepted, or made by the OEM.