Tag Archives: china screw extruder

Parallel supplier made in China – replacement parts – in Antwerp Belgium Double Screw Extruder for Powder Coating MaEPT Machine with top quality

Parallel supplier made in China - replacement parts - in Antwerp Belgium Double Screw Extruder for Powder Coating MaEPT Machine with top quality

We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears factory in China with 5 diverse branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Twin Screw Extruder for Acrylic Dependent PowderBall-detent torque limiters transmit power through arrays of balls locked (by springs) in detents. These solitary or multi-position torque limiters clutch hooked up load by letting the balls escape their detents when travel torque exceeds that to conquer the spring set. Roller-detent torque limiters operate significantly the very same way as ball-detent varieties — by wedging between the torque limiter’s internal and outer races. These torque limiters can require manual reset, or they can reset immediately. If a multi-place product, detents are spaced each thirty, 60, 90° or other interval to serve gradual-speed axes that simply cannot tolerate a extended sluggish wait around for reengagement Coating Manufacturing:

Primary Functions:

*Simple to use and simple to thoroughly clean

*Advanced heating and via-shaft cooling

*certain electrical power and torque maximise output without losing vitality

*Torque limiter to protect the push train

*Precise and responsive temperature handle in excess of barrel

*Break up design and style of barrel and liner inserts for easy cleaning and maintainence

*Top & Side feeding alternatives

*Stainless protect for safety and physical appearance

Specialized Parameters:
 

Design Capacity (kg/h) Diameter (mm) Screw Duration (mm) Screw Pace (r/min) Principal Motor (kw) Feeder Motor (kw) Heating Energy (kw) General Proportions (mm)
TSX-forty 60-a hundred and eighty 40 24D -800 11/15/eighteen.five .fifty five eight 1850*700*1750
TSX-52 one hundred-310 52 24D -800 22/30/37 .seventy five 10 2700*900*2200
TSX-sixty five 280-700 sixty five 24D -800 45/fifty five/75 one.1 twelve 2900*one thousand*2400
TSX-75 560-840 75 24D -800 75/90 1.five sixteen 3100*1200*2500
TSX-85 840-1260 85 24D -800 90/a hundred and ten two.two 20 3700*1500*2900

Organization:

Xihu (West Lake) Dis.sunlight is a leading manufacturer in China of Powder Coating Creation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We have exported to nearly thirty nations and locations in the past ten a long time, and win commonly great reputations.

We passed CE certification approval and ATEX explosion resistant check, we do know how to fulfill the diversified and personalized produced requests of our clients.

Our eternal enterprise philosophy: consistant top quality, efficient interaction, responsible service.

 

The use of first equipment manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our organization and the shown replacement areas contained herein are not sponsored, accepted, or produced by the OEM.

Parallel supplier made in China - replacement parts - in Antwerp Belgium Double Screw Extruder for Powder Coating MaEPT Machine with top quality

Parallel supplier made in China - replacement parts - in Antwerp Belgium Double Screw Extruder for Powder Coating MaEPT Machine with top quality

Parallel supplier made in China - replacement parts - in Antwerp Belgium Double Screw Extruder for Powder Coating MaEPT Machine with top quality

Professional near me made in China – replacement parts – in Rostov-on-Don Russian Federation Double Screw Extruder for Powder Paint Production with top quality

Professional near me made in China - replacement parts - in Rostov-on-Don Russian Federation Double Screw Extruder for Powder Paint Production with top quality

We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

one. Mixers:

one.1 Automated Container Mixer

Automatic container mixer is wor ept with continuous material trolleys, the container fills the supplies and lifted up and connnected tightly with mixing head routinely. The mixing head tilts with each other with the containers, and then acquire the homogeneous mixing end result, soon after ending mixing as per setting time, and return to original place, the whole procedure will be managed by PLC

Main Features:

Many detachable containers for circular operation
Substantial performance
Adopting PLC to recognize automation
Homogenized combination
No curing granule
Practical for cleaning and maintenance
Safe and relaiable operation

TechnTorque limiters perform either by slipping or entirely disconnecting the drive from the driven load. Some torque limiters of the previous type (especially those utilizing friction plates) are also called slip clutches. In other contexts, torque limiters are occasionally referred to as overload clutches.ical Data:
 

Model Volume (L) Output (kg/tank) Mixing Motor (kw) Tilting Motor (kw) Crushing Motor (kw) Mixing Time (min) Control Mode All round Dimensions (MM)
FHJ-15 15 eight one.5     five-10 PLC  750*480*950
FHJ-120 120 60 five.five .two   five-10 PLC  1800*1800*1950
FHJ-150  a hundred and fifty 70 5.5 .37 2.two five-ten PLC  2150*1100*2300 
FHJ-300 three hundred one hundred fifty fifteen three 2.two 5-10 PLC  2150*1100*2300 
FHJ-600  600 three hundred 22 4 four 5-ten PLC  2650*1250*2700 
FHJ-1000 a thousand 500 thirty four 4 5-ten PLC  2900*1550*3100 
FHJ-2000  2000 1000 forty five 5.five 5.5 5-ten PLC  3500*2350*3650 

1.2 High Velocity Pre-Mixer:

Characteristics:

Substantial efficiency & straightforward procedure

Effortless colour changing, protected cleansing

Combined mixing & crushing as a single

Mixing time preseting, short & homogeneous

Superb sealing, powder lea ept free of charge

Vertical or horizontal kind as optional

Technical Knowledge:
 

Product Quantity (L) Mixing Motor (kw) Crushing Motor (kw) Mixing Time (min) Overall Dimensions (mm)
GHJ-twenty twenty .55 .37 3-5 seven-hundred*five hundred*800
GHJ-100 100 3 one.five three-5 one thousand*600*900
GHJ-200 200 5.5 three three-five 1500*900*1400
GHJ-300 300 7.5 4 3-6 1800*900*1400
GHJ-500 500 15 five.5 4-six 1800*1300*1800
GHJ-800 800 eighteen.5 7.5 4-6 1900*1300*2000
GHJ-a thousand a thousand 22 7.five four-6 2300*1400*2000

one.3 Double Cone Mixer:

This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This machine is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound components. It has outstanding influence in mixing powders and particles with fairly great fluidity. Its barrel is produced of stainless metal, which is polished the two inside and exterior, featuring beautiful visual appeal and effortless operation.

Technological Information:
 

Product Volume (L) Output (kg/tank) Rotating Motor (kw) Mixing Motor (kw) Mixing Time (min) All round Proportions (mm)
SXH-a hundred three hundred one hundred fifty 1.5 1.5 -thirty 1760*830*2030
SXH-two hundred four hundred 200 1.five one.five -thirty 1830*830*2150
SXH-three hundred 600 three hundred two.2 one.five -30 1980*one thousand*2275
SXH-500 1000 five hundred 4 four 1-thirty 2630*1140*2620
SXH-one thousand 2000 1000 5.five 5.5 -thirty 3060*1440*2860
SXH-1500 3000 1500 seven.five 7.five -30 3700*2000*2970
SXH-2000 4000 2000 eight.5 eight.5 -30 3800*2500*3500

two. Twin-Screw Extruder

two.1 High torque & Large Pace Rotation Twin-Screw Extruder:

Primary Attributes:

*Complete Gearbox from specialist EPT maker, reduced sound, tough longevity

*High screw velocity, substantial shearing, fast discharge

*Unbiased lube oil cooling system design and style

*Torque limiter to protect the drive practice

*Suited for reclaim powder, unique powder manufacturing

*Break up design of barrel and liner inserts for effortless cleansing and maintainence

*Best & Side feeding possibilities

*Other functions same as standard variety extruder

Specialized Parameters:
 

Design Capability (kg/h) Screw Diameter (mm) Screw Size (mm) Screw Pace (r/min) Major Motor (kw) Feeder Motor (kw) Heating Energy (kw) General Proportions (mm)
TSX-forty eighty-260 forty 16D -800 11/fifteen/18.5 .55 8 1850*seven-hundred*1750
TSX-52 a hundred and fifty-450 52 16D -800 22/30/37 .seventy five ten 2700*900*2200
TSX-65 400-a thousand sixty five 16D -800 forty five/55/seventy five 1.1 twelve 2900*1000*2400
TSX-seventy five 800-1200 75 16D -800 seventy five/ninety 1.5 16 3100*1200*2500
TSX-85 1200-1800 85 16D -800 ninety/one hundred ten two.two 20 3700*1500*2900

2.2 Traditional Kind Co-Rotation Parallel Twin Screw Extruder

Characteristics:

*Powerful shearing, effortless cleansing

*Precise vehicle temperature manage, higher cooling & heating exchagne

*Hinged clamshell sort barrel opening, segmented liners for easy changing and cost conserving

*Feeder effortless assembly & disassembly, internal composition to steer clear of agglomeration

*Configurable screw utilized for defferent powder formulas

*Screw and barrel undertake special supplies like Cr12MoV, CPM, and many others., high putting on resisting

*Fairly gearbox with reduced sound dB stage

*Torque limiter to protect the generate prepare

*Reduced vitality intake

Technical Parameters:
 

Design Capacity (kg/h) Screw Diameter (mm) Screw Duration Screw Pace (r/min) Main Motor (kw) Feeder Motor (kw) Heating Electricity (kw) General Dimensions (mm)
SLJ-40 eighty-220 40 16D -five hundred 11/15/18.5 .fifty five 4 1800*600*1700
SLJ-50 150-three hundred 50 16D -500 22/30 .75 8 2600*seven-hundred*2000
SLJ-fifty five 300-400 fifty five 16D -500 30/37 .seventy five 8 2700*900*2300
SLJ-sixty 400-600 sixty 16D -500 forty five one.1 12 2750*a thousand*2350
SLJ-75 600-800 75 16D -five hundred fifty five one.5 twelve 2900*1100*2400
SLJ-eighty 800-1200 eighty 16D -500 seventy five/90 2.two twenty 3700*800*2800

two.3 Lab Type Extruder

Complex Parameters:
 

Design Potential (kg/h) Screw Diameter (mm) Screw Duration Screw Pace (r/min) Principal Motor (kw) Feeder Motor (kw) Heating Electrical power (kw) Overall Proportions (mm)
TSX-twenty .2-ten 22 16D -600 2.2-4 .one two 1600*three hundred*850
SLJ-thirty 1-thirty thirty 16D -five hundred 3-5.five .18 3.2 1430*550*1300
SLJ-32 40-eighty 32 16D -five hundred 7.5/11 .twenty five three.2 1600*five hundred*1500

3 Cooling Belt

3.1 H2o Cooled Cooling Belt with Flaker:

Characteristics:

Constant quality imported steel belt

Base cooling h2o spraying system, installed heating and cooling gadget

Equipped with guidebook gadget to stay away from deforming

Greater cooling result, larger efficient efficiency

Few upkeep and effortless cleansing

Chips thickness and roller speed adjustable

Crusher with finger pin and enamel sort

Minimized cross contamination, basic procedure

Technological Parameters:
 

Model Roller Dia. (mm) Belt Width (mm) Belt Size (mm) Drive Motor (kw) Ability (kg/h) Cooling Method Overall Dimensions (mm)
GDY-406 220 600 4000 1.five two hundred-four hundred Cooled H2o 4000*750*1600
GDY-508 325 800 5000 three four hundred-five hundred Cooled H2o 5000*900*1800
GDY-510 325 one thousand 5000 3 five hundred-seven hundred Cooled H2o 5000*1100*1900
GDY-610 440 a thousand 6000 4 600-800 Cooled Drinking water 6000*1100*1900
GDY-612 440 1200 6000 four 700-900 Cooled H2o 6000*1400*1900
GDY-712 600 one thousand 7000 five.5 900-1200 Cooled Drinking water 7000*1400*2000
 

3.2 Air Cooled Variety Caterpillar Cooling Belt with Flaker:

Functions:

Stainless metal made caterpillar, air cooling

Flake chips thichness and conveying velocity adjustable

Sensible layout for cooling rollers inside, specialist surface remedy to keep away from drinking water lea ept and rust

Put in with simplified air conditioning device

Secure procedure, like crisis button, clockwise and counter-clockwise rotation.

Complex Parameters:
 

Design Roller Dia. (mm) Belt Width (mm) Belt Length (mm)  Drive Motor (kw) Blower Motor (kw) Ability (kg/h) Cooling Mode Total Proportions (mm)
JFY-204  one hundred sixty/160 four hundred 2000 .fifty five 200-400 thirty-a hundred Chilled Water&Air 2000*450*900
JFY-406 a hundred and sixty/220 600 4000 .75 four hundred-500 100-220 Chilled H2o&Air 4000*850*950
JFY-508 a hundred and eighty/325 seven hundred 5000 .seventy five five hundred-seven hundred 220-four hundred Chilled H2o&Air 5000*1050*1200
JFY-510 one hundred eighty/325 800 5000 one.one 600-800 400-500 Chilled Water&Air 5000*1150*1200
JFY-610 a hundred and eighty/325 800 6000 one.one 700-900 five hundred-700 Chilled Water&Air 6000*1150*1200
JFY-710 180/325 one thousand 6000 1.five 900-1200 600-900 Chilled Water&Air 7000*1250*1450
JFY-812 one hundred eighty/325 a thousand 7000 two.2 900-1200 900-1200 Chilled Water&Air 8000*1650*1600

3.3 PU Kind Air Cooled Cooling Belt

Characteristics:

Adjustable thichness and roller velocity

Air cooled to steer clear of cross contamination

Roller and crusher equipped with overload protection

Large efficiencies

One particular piece PU belt to faciliate simple cleansing and servicing

Compact style for constrained area

Specialized Parameters:
 

Product Roll Dia. (mm) Band Width (mm) Band Size (mm) Motor Electricity (kw) Throughput (kg/h) Proportions (mm)
PFY-104 156 four hundred one thousand 1.one fifty one thousand*870*1050
PFY-206 220 600 2000 one.1 one hundred fifty 2000*1150*1100
PFY-208 445 800 2000 two.2 300 2000*1100*1100
PFY-210 445 1000 2000 2.two 500 2000*1300*1100
PFY-310 622 1000 3000 two.2 800 2000*1300*1200

four ACM (Air Classifier Mill) Grinding Method

Characteristics:

Safety in accordance with EU explosion resistant common ATEX/PSR11

Reduced noise layout (from mill to fan system)

Particle dimensions distribution adjustable on ask for

Mill body temperature and air ingestion volume monitoring

Rotary sieve with exclusive style and sturdy for mesh use problem

Whole grinding program developed for powder dust free

Completed powder products with far more than ninety eight percent

Large output, straightforward operation cleaning and routine maintenance

Specialized Parameters:
 

Model Mill Motor kw Rotor rpm Classifier Motor Classifier rpm Fan kw Air cbm/h Ability kg/h General proportions mm
ACM-02 2.2 12000 .37 -3000 three 350 2-30 1430*550*1300
ACM-05 four 11000 .75 -3000 four 800 30-80 2100*1000*2150
ACM-ten 7.5 7000 one.five -3000 eleven 2500 a hundred-260 6200*1250*3200
ACM-fifteen 11 7000 1.five -3000 fifteen 3000 two hundred-350 6500*1300*3300
ACM-twenty fifteen 6600 2.2 -3000 22 3500 300-400 7500*1300*3600
ACM-30 22 5500 3 -3000 30 4500 400-550 7900*1500*3600
ACM-forty 30 4600 5.5 -3000 37 5500 600-800 8000*1700*3600
ACM-50 37 4000 7.five -3000 45 6500 1000-1200 9000*1900*3900
ACM-60 forty five 3500 seven.five -3000 fifty five 8000 1200-1600 9000*2000*4000

Business:

Xihu (West Lake) Dis.sunshine is a major company in China of Powder Coating Creation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 a long time of encounters in this ept and have exported to practically 30 nations and locations in the past ten many years, and acquire commonly good reputations.

We passed CE certification acceptance and ATEX explosion resistant take a look at, etc. global specifications, we do know how to meet the diversified and customized produced requests of our customers.

Our eternal organization philosophy: consistant top quality, powerful interaction, accountable provider.

The use of first tools manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our firm and the detailed alternative areas contained herein are not sponsored, accepted, or made by the OEM.

Professional near me made in China - replacement parts - in Rostov-on-Don Russian Federation Double Screw Extruder for Powder Paint Production with top quality

Professional near me made in China - replacement parts - in Rostov-on-Don Russian Federation Double Screw Extruder for Powder Paint Production with top quality

Professional near me made in China - replacement parts - in Rostov-on-Don Russian Federation Double Screw Extruder for Powder Paint Production with top quality

New near me made in China – replacement parts – in Bissau Guinea-Bissau Style Double Screw Extruder for Powder Coating with top quality

New near me made in China - replacement parts - in Bissau Guinea-Bissau Style Double Screw Extruder for Powder Coating with top quality

We – EPG Team the biggest gearbox & motors , torque limiter couplings and gears factory in China with 5 distinct branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

one. Mixers:

1.1 Computerized Container Mixer

Automatic container mixer is wor ept with constant content trolleys, the container fills the materials and lifted up and connnected tightly with mixing head immediately. The mixing head tilts jointly with the containers, and then obtain the homogeneous mixing result, following ending mixing as for every location time, and return to first position, the whole procedure will be managed by PLC

Principal Features:

A number of removable containers for circular operation
High performance
Adopting PLC to comprehend automation
Homogenized mixture
No curing granule
Handy for cleaning and upkeep
Secure and relaiable procedure

Complex Info:
 

Product Quantity (L) Output (kg/tank) Mixing Motor (kw) Tilting Motor (kw) Crushing Motor (kw) Mixing Time (min) Control Manner All round Proportions (MM)
FHJ-fifteen fifteen eight one.5     5-10 PLC  750*480*950
FHJ-a hundred and twenty one hundred twenty 60 5.5 .two   five-10 PLC  1800*1800*1950
FHJ-150  one hundred fifty 70 five.5 .37 two.2 5-ten PLC  2150*1100*2300 
FHJ-three hundred 300 a hundred and fifty fifteen three 2.two five-10 PLC  2150*1100*2300 
FHJ-600  600 three hundred 22 4 four 5-ten PLC  2650*1250*2700 
FHJ-a thousand one thousand five hundred 30 4 four five-ten PLC  2900*1550*3100 
FHJ-2000  2000 one thousand forty five 5.5 five.5 five-10 PLC  3500*2350*3650 

1.2 High Speed Pre-Mixer:

Attributes:

High effectiveness & simple operation

Effortless color shifting, secure cleansing

Merged mixing & crushing as one particular

Mixing time preseting, brief & homogeneous

Superb sealing, powder lea ept cost-free

Vertical or horizontal sort as optional

Complex Info:
 

Design Quantity (L) Mixing Motor (kw) Crushing Motor (kw) Mixing Time (min) Total Dimensions (mm)
GHJ-20 20 .55 .37 3-5 700*500*800
GHJ-100 100 three 1.5 3-five 1000*600*900
GHJ-200 two hundred 5.five three 3-5 1500*900*1400
GHJ-three hundred three hundred 7.five 4 three-six 1800*900*1400
GHJ-500 five hundred 15 five.five 4-6 1800*1300*1800
GHJ-800 800 18.five 7.five four-6 1900*1300*2000
GHJ-a thousand one thousand 22 7.five four-six 2300*1400*2000

one.3 Double Cone Mixer:

This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This machine is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound supplies. It has outstanding effect in mixing powders and particles with fairly great fluidity. Its barrel is created of stainless steel, which is polished each inside of and outdoors, featuring gorgeous visual appeal and easy procedure.

Complex Info:
 

Model Quantity (L) Output (kg/tank) Rotating Motor (kw) Mixing Motor (kw) Mixing Time (min) All round Proportions (mm)
SXH-a hundred three hundred a hundred and fifty one.five one.five -thirty 1760*830*2030
SXH-200 400 200 one.5 1.five -30 1830*830*2150
SXH-300 600 three hundred two.two 1.five -thirty 1980*a thousand*2275
SXH-five hundred a thousand 500 four 4 one-30 2630*1140*2620
SXH-a thousand 2000 1000 five.five 5.five -30 3060*1440*2860
SXH-1500 3000 1500 7.5 seven.five -30 3700*2000*2970
SXH-2000 4000 2000 8.five eight.five -30 3800*2500*3500

2. Twin-Screw Extruder

2.1 Higher torque & Large Pace Rotation Twin-Screw Extruder:

Main Attributes:

*Full Gearbox from professional EPT maker, low sound, tough longevity

*Higher screw speed, higher shearing, quick discharge

*Unbiased lube oil cooling method design

*Torque limiter to defend the travel train

*Suited for reclaim powder, unique powder generation

*Break up layout of barrel and liner inserts for easy cleansing and maintainence

*Leading & Aspect feeding options

*Other attributes identical as conventional kind extruder

Specialized Parameters:
 

Product Potential (kg/h) Screw Diameter (mm) Screw Length (mm) Screw Pace (r/min) Main Motor (kw) Feeder Motor (kw) Heating Power (kw) Total Dimensions (mm)
TSX-40 80-260 forty 16D -800 eleven/15/18.five .55 8 1850*seven-hundred*1750
TSX-52 one hundred fifty-450 52 16D -800 22/thirty/37 .seventy five ten 2700*900*2200
TSX-sixty five four hundred-1000 65 16D -800 45/55/seventy five 1.one twelve 2900*1000*2400
TSX-75 800-1200 seventy five 16D -800 seventy five/90 1.five 16 3100*1200*2500
TSX-85 1200-1800 eighty five 16D -800 90/one hundred ten 2.two 20 3700*1500*2900

2.2 Traditional Type Co-Rotation Parallel Twin Screw Extruder

Attributes:

*Sturdy shearing, straightforward cleansing

*Accurate car temperature management, substantial cooling & heating exchagne

*Hinged clamshell variety barrel opening, segmented liners for effortless changing and expense conserving

*Feeder easy assembly & disassembly, interior structure to avoid agglomeration

*Configurable screw used for defferent powder formulas

*Screw and barrel undertake particular supplies like Cr12MoV, CPM, etc., higher donning resisting

*Really gearbox with minimal sound dB stage

*Torque limiter to shield the travel teach

*Lower energy use

Technical Parameters:
 

Model Capacity (kg/h) Screw Diameter (mm) Screw Length Screw Pace (r/min) Major Motor (kw) Feeder Motor (kw) Heating Electricity (kw) Overall Proportions (mm)
SLJ-40 80-220 40 16D -five hundred 11/15/eighteen.5 .55 4 1800*600*1700
SLJ-fifty one hundred fifty-300 50 16D -500 22/30 .seventy five eight 2600*seven-hundred*2000
SLJ-55 300-four hundred 55 16D -five hundred 30/37 .seventy five 8 2700*900*2300
SLJ-60 400-600 sixty 16D -500 forty five 1.1 12 2750*1000*2350
SLJ-seventy five 600-800 seventy five 16D -500 fifty five 1.five 12 2900*1100*2400
SLJ-80 800-1200 80 16D -five hundred seventy five/90 2.2 twenty 3700*800*2800

2.3 Lab Type Extruder

Technical Parameters:
 

Product Ability (kg/h) Screw Diameter (mm) Screw Length Screw Speed (r/min) Principal Motor (kw) Feeder Motor (kw) Heating Electrical power (kw) All round Proportions (mm)
TSX-twenty .2-ten 22 16D -600 two.2-4 .one 2 1600*300*850
SLJ-30 1-thirty thirty 16D -five hundred three-5.five .18 3.two 1430*550*1300
SLJ-32 40-eighty 32 16D -five hundred 7.5/11 .twenty five three.two 1600*five hundred*1500

three Cooling Belt

three.1 Drinking water Cooled Cooling Belt with Flaker:

Features:

Consistent good quality imported steel belt

Bottom cooling water spraying technique, set up heating and cooling device

Outfitted with information device to avoid deforming

Far better cooling consequence, greater effective productivity

Handful of servicing and easy cleansing

Chips thickness and roller velocity adjustable

Crusher with finger pin and teeth type

Minimized cross contamination, straightforward procedure

Complex Parameters:
 

Design Roller Dia. (mm) Belt Width (mm) Belt Length (mm) Generate Motor (kw) Capacity (kg/h) Cooling Method Total Dimensions (mm)
GDY-406 220 600 4000 1.5 two hundred-four hundred Cooled Drinking water 4000*750*1600
GDY-508 325 800 5000 3 four hundred-500 Cooled Water 5000*900*1800
GDY-510 325 one thousand 5000 3 five hundred-seven hundred Cooled Water 5000*1100*1900
GDY-610 440 1000 6000 4 600-800 Cooled Water 6000*1100*1900
GDY-612 440 1200 6000 four seven hundred-900 Cooled Drinking water 6000*1400*1900
GDY-712 600 a thousand 7000 five.five 900-1200 Cooled Water 7000*1400*2000
 

three.2 Air Cooled Type Caterpillar Cooling Belt with Flaker:

Functions:

Stainless steel created caterpillar, air cooling

Flake chips thichness and conveying speed adjustable

Reasonable design for cooling rollers within, professional floor treatment to keep away from h2o lea ept and rust

Installed with simplified air conditioning device

Secure operation, like emergency button, clockwise and counter-clockwise rotation.

Technological Parameters:
 

Product Roller Dia. (mm) Belt Width (mm) Belt Length (mm)  Travel Motor (kw) Blower Motor (kw) Potential (kg/h) Cooling Mode General Proportions (mm)
JFY-204  one hundred sixty/one hundred sixty 400 2000 .55 200-400 30-one hundred Chilled Water&Air 2000*450*900
JFY-406 a hundred and sixty/220 600 4000 .75 four hundred-five hundred a hundred-220 Chilled Water&Air 4000*850*950
JFY-508 180/325 700 5000 .75 500-700 220-400 Chilled H2o&Air 5000*1050*1200
JFY-510 one hundred eighty/325 800 5000 one.1 600-800 four hundred-500 Chilled Water&Air 5000*1150*1200
How Torque Benefit is Decided The torque price of a Zero-Max Torq-Tender is determined by the force of the springs that are mounted in the device. The spring pressure acts on slides that are element of the internal shaft these slides transmit drive that retains the drive important in its engagement slot in the outer housing. JFY-610 one hundred eighty/325 800 6000 1.one seven hundred-900 five hundred-700 Chilled H2o&Air 6000*1150*1200
JFY-710 a hundred and eighty/325 one thousand 6000 1.5 900-1200 600-900 Chilled Water&Air 7000*1250*1450
JFY-812 one hundred eighty/325 one thousand 7000 two.2 900-1200 900-1200 Chilled H2o&Air 8000*1650*1600

three.3 PU Variety Air Cooled Cooling Belt

Functions:

Adjustable thichness and roller pace

Air cooled to keep away from cross contamination

Roller and crusher outfitted with overload defense

Large efficiencies

A single piece PU belt to faciliate straightforward cleansing and routine maintenance

Compact style for limited room

Technological Parameters:
 

Design Roll Dia. (mm) Band Width (mm) Band Duration (mm) Motor Power (kw) Throughput (kg/h) Proportions (mm)
PFY-104 156 four hundred a thousand one.1 50 1000*870*1050
PFY-206 220 600 2000 one.1 one hundred fifty 2000*1150*1100
PFY-208 445 800 2000 two.two 300 2000*1100*1100
PFY-210 445 a thousand 2000 two.2 five hundred 2000*1300*1100
PFY-310 622 1000 3000 two.2 800 2000*1300*1200

4 ACM (Air Classifier Mill) Grinding System

Attributes:

Safety in accordance with EU explosion resistant common ATEX/PSR11

Lower sounds style (from mill to enthusiast method)

Particle dimension distribution adjustable on request

Mill entire body temperature and air consumption volume checking

Rotary sieve with unique design and style and sturdy for mesh dress in issue

Entire grinding method developed for powder dust free

Concluded powder items with much more than 98 p.c

Large output, simple procedure cleansing and upkeep

Specialized Parameters:
 

Design Mill Motor kw Rotor rpm Classifier Motor Classifier rpm Fan kw Air cbm/h Capacity kg/h Overall proportions mm
ACM-02 2.two 12000 .37 -3000 three 350 2-thirty 1430*550*1300
ACM-05 4 11000 .seventy five -3000 4 800 30-eighty 2100*a thousand*2150
ACM-10 seven.5 7000 1.5 -3000 11 2500 100-260 6200*1250*3200
ACM-fifteen 11 7000 one.five -3000 fifteen 3000 two hundred-350 6500*1300*3300
ACM-twenty fifteen 6600 two.2 -3000 22 3500 three hundred-400 7500*1300*3600
ACM-thirty 22 5500 three -3000 30 4500 four hundred-550 7900*1500*3600
ACM-40 thirty 4600 5.five -3000 37 5500 600-800 8000*1700*3600
ACM-50 37 4000 seven.five -3000 45 6500 1000-1200 9000*1900*3900
ACM-60 45 3500 7.five -3000 55 8000 1200-1600 9000*2000*4000

Firm:

Xihu (West Lake) Dis.solar is a top maker in China of Powder Coating Manufacturing Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit thirty years of ordeals in this ept and have exported to practically thirty nations and regions in the previous 10 many years, and acquire widely good reputations.

We passed CE certification approval and ATEX explosion resistant take a look at, and so forth. intercontinental expectations, we do know how to meet up with the diversified and customized made requests of our consumers.

Our everlasting business philosophy: consistant quality, successful conversation, responsible support.

1.Any inquires will be replied in the initial time.

2.Higher quality merchandise, competitive cost, fast lead time.

three.Our product sales staff will be have a good communication with you ,permit you fully comprehend the situation of our enterprises and products.

4.We will supply substantial top quality overseas provider ,our specialized workers will be capable to offer you with technical help ,for you individually to overseas assembly and examination products.

five.Our consumer provider staff will set your comments to the specialized personnel in the 1st time, well timed remedy your issue.
 

The use of authentic products manufacturer’s (OEM) portion quantities or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our business and the listed alternative elements contained herein are not sponsored, accepted, or manufactured by the OEM.

New near me made in China - replacement parts - in Bissau Guinea-Bissau Style Double Screw Extruder for Powder Coating with top quality

New near me made in China - replacement parts - in Bissau Guinea-Bissau Style Double Screw Extruder for Powder Coating with top quality

New near me made in China - replacement parts - in Bissau Guinea-Bissau Style Double Screw Extruder for Powder Coating with top quality

Twin wholesaler made in China – replacement parts – in Santa Fe Argentina Screw Extruder Production Line KN95  Raw material PP with top quality

Twin wholesaler made in China - replacement parts - in Santa Fe Argentina Screw Extruder Production Line KN95  Raw material PP with top quality

We – EPG Team the most significant gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 various branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Twin screw extruder generation line KN95 uncooked materail PP
Merchandise Description:
ZheJiang ept engineering Co.,Ltd is devote to dewvelop, design and style, and manufacture co-rotation, counter- rotation parallel twin screw extruder production line. we integrate and update these encounters to produce our transmission notion and form our core engineering” bilateral gear symmetrical driving method”. The technological innovation enables our extruders have the rewards of “Large torque, higher efficiency, low energy-usage, substantial price tag/functionality ratio,extended support daily life.” We preserve speed with the initial course extruder manufactures in the planet.
Products & services:
1. Twin screw extruder line
2. LFT-G creation line
three. Computerized lengthy fiber bolstered thermoplastic composites production line
four. Counter-rotation parallel twin screw extruder
five. Differential concentration mixer
6. Fixing imported extruder and machining massive spaeparts
7. Spare areas for extruder
Specialized benefits of HPL extruder:
1. Higher torque: Carrying capacity aspect of gearbox≥13
two. Large precision: Clearance0.15mm
3.High provider lifestyle:≥72000hours
four. Higher velocity: Max. 1800rpm/m
5.Large quality:small clearance decrease substance reflux, residence time in barrels and excessive shear
six.Substantial effectiveness:Output is 2-3 instances bigger than exact same dimensions extruder from domestic companies.
Skilled capabilities and services positive aspects:
1.Combine upstream and downtream equipments  of extrusion line according to approach and user needs.
2. Combine control of the entire  production line
3.Supply specialized assistance for your creation layout and tools installation
four. give lifelong techinical assist and spareparts support
5.Supply layout, equipment all types of screw elemnts on japan and Germany extruders
6.Give fix and sustain all kinds of gearbox and extruders of japan anD Germany.
 

Configuration feartures of HPL sequence extruder
one. gearbox: bilatral symmetry gear drive program layout service existence more than 72000hrs, average torque coefficient=ten.4, model of bearing are Sweden SKF and Germany INA
2.Torque limiter:torque limiter imported from Germany
three.Barrel: integrated dress in-resistant alloy steel liner Channel of barrel is annular jet kind, not effortless to belocked
4.Scew shaft: materials of screw aspect is W6Cr5Mo4V2 Materials of shaft is large imported from Finland.
five. Heating medium: heating rod imported from Germany
6. Equipment frame: high rigidity complete metal plate welding
Electrical technique: PLC and instrument management for your option management cabinet and electrical power cabinet are seperate, powerful and weak electrical are isolated set up.

Standard application
Reinfoce modification:PP,PA,PBT, Abdominal muscles,, Pc, POM, PPS, PET+Carbon fiber, glass fiber
Loaded modification: PE, PP, EVA+CaCo3,talcum powder,titianium dioxide, carbon black and other inoranic filler
Masterbatch:coloration masterbatch,flame retardant masterbatch,carbon black masterbatch,degradable masterbatch
Plastic alloy:Personal computer+ Ab muscles, PA+Ab muscles, PA+PE, PBT+PET,etc.
Particular Engineering Plastic: PEEK, PEI, PPS,PPSU, PA6T,PA9T,LCP,and so forth.
Large compouding dispersion extrusion:nano substance, powder coating and fiber grade masterbatch
Response extrusion: polyreaction andpoAll Torque Limiters are computerized safety units to avert overload, delivering trustworthy functions and adjustable features The Torque Limiter with a sprocket is standardized, conserving you the hassle of machining and assembly Reliably safeguards your device by way of simple handlinglycondension

Exhibition:

 

get in touch with individual Chelsea Tian
   

 

The use of first products manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our firm and the listed replacement parts contained herein are not sponsored, authorized, or produced by the OEM.

Twin wholesaler made in China - replacement parts - in Santa Fe Argentina Screw Extruder Production Line KN95  Raw material PP with top quality

Twin wholesaler made in China - replacement parts - in Santa Fe Argentina Screw Extruder Production Line KN95  Raw material PP with top quality

Twin wholesaler made in China - replacement parts - in Santa Fe Argentina Screw Extruder Production Line KN95  Raw material PP with top quality

Twin Cheap made in China – replacement parts – in Mekele Ethiopia Screw Extruder for Powder Coating Processing Equipment with top quality

Twin Cheap made in China - replacement parts - in Mekele Ethiopia Screw Extruder for Powder Coating Processing Equipment with top quality

We – EPG Group the biggest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 different branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

one. Mixers:
 
 
Site:  , cn

1.1 Computerized Container Mixer

Automatic container mixer is wor ept with steady content trolleys, the container fills the resources and lifted up and connnected tightly with mixing head automatically. The mixing head tilts together with the containers, and then obtain the homogeneous mixing outcome, following ending mixing as for every environment time, and return to first place, the complete approach will be controlled by PLC

Principal Attributes:

Numerous detachable containers for circular procedure
High effectiveness
Adopting PLC to understand automation
Homogenized combination
No curing granule
Convenient for cleansing and maintenance
Protected and relaiable procedure

Complex Data:
 

Product Volume (L) Output (kg/tank) Mixing Motor (kw) Tilting Motor (kw) Crushing Motor (kw) Mixing Time (min) Handle Mode All round Dimensions (MM)
FHJ-fifteen 15 eight one.five     5-10 PLC  750*480*950
FHJ-a hundred and twenty a hundred and twenty sixty 5.5 .2   5-ten PLC  1800*1800*1950
FHJ-150  a hundred and fifty 70 5.5 .37 two.2 5-ten PLC  2150*1100*2300 
FHJ-300 300 a hundred and fifty 15 3 2.two five-ten PLC  2150*1100*2300 
FHJ-600  600 three hundred 22 4 4 five-ten PLC  2650*1250*2700 
FHJ-a thousand 1000 five hundred 30 4 4 5-10 PLC  2900*1550*3100 
FHJ-2000  2000 one thousand forty five five.5 five.5 5-ten PLC  3500*2350*3650 

one.2 Higher Speed Pre-Mixer:

Characteristics:

Higher efficiency & easy procedure

Simple color altering, secure cleansing

Merged mixing & crushing as one particular

Mixing time preseting, limited & homogeneous

Exceptional sealing, powder lea ept free of charge

Vertical or horizontal type as optional

Technological Knowledge:
 

Product Quantity (L) Mixing Motor (kw) Crushing Motor (kw) Mixing Time (min) Total Proportions (mm)
GHJ-20 20 .55 .37 three-5 seven-hundred*500*800
GHJ-one hundred a hundred three one.five 3-5 a thousand*600*900
GHJ-two hundred 200 5.5 three three-five 1500*900*1400
GHJ-three hundred 300 7.5 four three-six 1800*900*1400
GHJ-five hundred 500 fifteen five.5 four-six 1800*1300*1800
GHJ-800 800 eighteen.5 7.5 four-six 1900*1300*2000
GHJ-one thousand one thousand 22 7.five 4-six 2300*1400*2000

one.3 Double Cone Mixer:

This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This machine is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound components. It has impressive impact in mixing powders and particles with fairly great fluidity. Its barrel is produced of stainless metal, which is polished both inside and outside the house, that includes stunning appearance and straightforward procedure.

Specialized Data:
 

Product Quantity (L) Output (kg/tank) Rotating Motor (kw) Mixing Motor (kw) Mixing Time (min) General Dimensions (mm)
SXH-100 three hundred a hundred and fifty 1.5 one.five -30 1760*830*2030
SXH-200 400 200 one.five one.5 -30 1830*830*2150
SXH-300 600 three hundred two.2 1.5 -30 1980*a thousand*2275
SXH-500 1000 500 four four 1-30 2630*1140*2620
SXH-a thousand 2000 1000 5.5 5.5 -30 3060*1440*2860
SXH-1500 3000 1500 seven.five seven.five -thirty 3700*2000*2970
SXH-2000 4000 2000 eight.5 eight.five -30 3800*2500*3500

2. Twin-Screw Extruder

2.1 Substantial torque & High Pace Rotation Twin-Screw Extruder:

Principal Functions:

*Complete Gearbox from expert EPT maker, low noise, tough longevity

*Large screw velocity, large shearing, quick discharge

*Impartial lube oil cooling technique design

*Torque limiter to shield the travel practice

*Appropriate for reclaim powder, specific powder generation

*Break up layout of barrel and liner inserts for straightforward cleansing and maintainence

*Best & Side feeding possibilities

*Other attributes identical as typical type extruder

Specialized Parameters:
 

Design Ability (kg/h) Screw Diameter (mm) Screw Size (mm) Screw Speed (r/min) Major Motor (kw) Feeder Motor (kw) Heating Energy (kw) Overall Proportions (mm)
TSX-40 eighty-260 40 16D -800 11/fifteen/eighteen.five .55 8 1850*seven-hundred*1750
TSX-fifty two a hundred and fifty-450 52 16D -800 22/30/37 .75 ten 2700*900*2200
TSX-65 four hundred-a thousand sixty five 16D -800 forty five/fifty five/seventy five 1.one 12 2900*1000*2400
TSX-seventy five 800-1200 75 16D -800 75/90 1.five 16 3100*1200*2500
TSX-85 1200-1800 85 16D -800 90/a hundred and ten 2.2 20 3700*1500*2900

2.2 Typical Kind Co-Rotation Parallel Twin Screw Extruder

Characteristics:

*Powerful shearing, straightforward cleaning

*Exact automobile temperature manage, higher cooling & heating exchagne

*Hinged clamshell kind barrel opening, segmented liners for straightforward changing and price saving

*Feeder effortless assembly & disassembly, interior construction to steer clear of agglomeration

*Configurable screw used for defferent powder formulation

*Screw and barrel undertake unique components like Cr12MoV, CPM, and so on., large sporting resisting

*Very gearbox with reduced sounds dB amount

*Torque limiter to shield the drive prepare

*Minimal power usage

Complex Parameters:
 

Model Capability (kg/h) Screw Diameter (mm) Screw Duration Screw Speed (r/min) Principal Motor (kw) Feeder Motor (kw) Heating Power (kw) Total Proportions (mm)
SLJ-40 80-220 40 16D -five hundred eleven/fifteen/18.5 .55 4 1800*600*1700
SLJ-fifty one hundred fifty-300 50 16D -five hundred 22/30 .seventy five 8 2600*700*2000
SLJ-55 300-400 fifty five 16D -five hundred thirty/37 .75 eight 2700*900*2300
SLJ-sixty four hundred-600 sixty 16D -five hundred forty five one.1 12 2750*a thousand*2350
SLJ-75 600-800 75 16D -five hundred fifty five 1.5 12 2900*1100*2400
SLJ-80 800-1200 80 16D -500 seventy five/90 two.two 20 3700*800*2800

2.3 Lab Kind Extruder

Complex Parameters:
 

Design Capability (kg/h) Screw Diameter (mm) Screw Duration Screw Velocity (r/min) Primary Motor (kw) Feeder Motor (kw) Heating Electrical power (kw) Total Proportions (mm)
TSX-20 .2-10 22 16D -600 two.2-four .one two 1600*three hundred*850
SLJ-30 one-thirty 30 16D -five hundred three-5.five .eighteen three.2 1430*550*1300
SLJ-32 40-eighty 32 16D -500 seven.5/eleven .25 three.two 1600*500*1500

three Cooling Belt

3.1 Water Cooled Cooling Belt with Flaker:

Functions:

Constant quality imported steel belt

Bottom cooling water spraying program, mounted heating and cooling gadget

Equipped with guidebook system to keep away from deforming

Much better cooling consequence, larger productive productivity

Few upkeep and easy cleansing

Chips thickness and roller speed adjustable

Crusher with finger pin and enamel kind

Minimized cross contamination, straightforward procedure

Specialized Parameters:
 

Model Roller Dia. (mm) Belt Width (mm) Belt Length (mm) Drive Motor (kw) Potential (kg/h) Cooling Mode Overall Dimensions (mm)
GDY-406 220 600 4000 1.five two hundred-400 Cooled Drinking water 4000*750*1600
GDY-508 325 800 5000 three four hundred-five hundred Cooled H2o 5000*900*1800
GDY-510 325 1000 5000 three 500-seven hundred Cooled Water 5000*1100*1900
GDY-610 440 1000 6000 4 600-800 Cooled Drinking water 6000*1100*1900
GDY-612 440 1200 6000 four seven-hundred-900 Cooled H2o 6000*1400*1900
GDY-712 600 1000 7000 5.5 900-1200 Cooled H2o 7000*1400*2000
 

three.2 Air Cooled Variety Caterpillar Cooling Belt with Flaker:

Attributes:

Stainless metal created caterpillar, air cooling

Flake chips thichness and conveying speed adjustable

Affordable design and style for cooling rollers within, skilled area therapy to avoid drinking water lea ept and rust

Put in with simplified air conditioning device

Secure operation, like crisis button, clockwise and counter-clockwise rotation.

Complex Parameters:
 

Model Roller Dia. (mm) Belt Width (mm) Belt Size (mm)  Generate Motor (kw) Blower Motor (kw) Ability (kg/h) Cooling Mode Total Dimensions (mm)
JFY-204  one hundred sixty/one hundred sixty four hundred 2000 .fifty five 200-400 thirty-one hundred Chilled Water&Air 2000*450*900
JFY-406 one hundred sixty/220 600 4000 .seventy five four hundred-five hundred one hundred-220 Chilled H2o&Air 4000*850*950
JFY-508 a hundred and eighty/325 700 5000 .75 500-seven hundred 220-400 ChillTorque values can be transformed in the subject, nevertheless the torque limiter have to be disassembled and the springs changed to achieve the new torque value.ed Drinking water&Air 5000*1050*1200
JFY-510 a hundred and eighty/325 800 5000 one.1 600-800 400-500 Chilled Drinking water&Air 5000*1150*1200
JFY-610 one hundred eighty/325 800 6000 one.1 700-900 500-seven-hundred Chilled H2o&Air 6000*1150*1200
JFY-710 a hundred and eighty/325 one thousand 6000 one.five 900-1200 600-900 Chilled Water&Air 7000*1250*1450
JFY-812 180/325 one thousand 7000 2.2 900-1200 900-1200 Chilled Drinking water&Air 8000*1650*1600

3.3 PU Sort Air Cooled Cooling Belt

Functions:

Adjustable thichness and roller pace

Air cooled to steer clear of cross contamination

Roller and crusher outfitted with overload safety

Substantial efficiencies

1 piece PU belt to faciliate straightforward cleansing and routine maintenance

Compact design and style for minimal area

Specialized Parameters:
 

Product Roll Dia. (mm) Band Width (mm) Band Duration (mm) Motor Energy (kw) Throughput (kg/h) Dimensions (mm)
PFY-104 156 400 a thousand one.one 50 1000*870*1050
PFY-206 220 600 2000 one.one one hundred fifty 2000*1150*1100
PFY-208 445 800 2000 two.two three hundred 2000*1100*1100
PFY-210 445 1000 2000 2.2 five hundred 2000*1300*1100
PFY-310 622 a thousand 3000 2.2 800 2000*1300*1200

four ACM (Air Classifier Mill) Grinding Technique

Features:

Safety in accordance with EU explosion resistant standard ATEX/PSR11

Reduced noise design and style (from mill to enthusiast method)

Particle measurement distribution adjustable on ask for

Mill body temperature and air ingestion volume checking

Rotary sieve with exclusive design and style and resilient for mesh put on problem

Complete grinding system developed for powder dust cost-free

Completed powder goods with a lot more than 98 percent

Substantial output, straightforward procedure cleaning and upkeep

Specialized Parameters:
 

Model Mill Motor kw Rotor rpm Classifier Motor Classifier rpm Admirer kw Air cbm/h Ability kg/h General dimensions mm
ACM-02 2.2 12000 .37 -3000 3 350 two-30 1430*550*1300
ACM-05 four 11000 .75 -3000 four 800 30-80 2100*a thousand*2150
ACM-ten 7.five 7000 one.five -3000 11 2500 100-260 6200*1250*3200
ACM-15 eleven 7000 1.five -3000 15 3000 200-350 6500*1300*3300
ACM-twenty 15 6600 two.2 -3000 22 3500 300-400 7500*1300*3600
ACM-30 22 5500 three -3000 thirty 4500 four hundred-550 7900*1500*3600
ACM-forty thirty 4600 5.five -3000 37 5500 600-800 8000*1700*3600
ACM-50 37 4000 7.five -3000 forty five 6500 a thousand-1200 9000*1900*3900
ACM-60 forty five 3500 7.five -3000 55 8000 1200-1600 9000*2000*4000

Organization:

Xihu (West Lake) Dis.sunshine is a leading producer in China of Powder Coating Generation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 a long time of encounters in this ept and have exported to almost 30 international locations and locations in the earlier ten many years, and win broadly good reputations.

We passed CE certification approval and ATEX explosion resistant take a look at, and so forth. intercontinental specifications, we do know how to meet the diversified and tailored made requests of our customers.

Our eternal enterprise philosophy: consistant quality, successful interaction, accountable provider.

The use of original gear manufacturer’s (OEM) component quantities or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our company and the outlined alternative areas contained herein are not sponsored, accredited, or produced by the OEM.

Twin Cheap made in China - replacement parts - in Mekele Ethiopia Screw Extruder for Powder Coating Processing Equipment with top quality

Twin Cheap made in China - replacement parts - in Mekele Ethiopia Screw Extruder for Powder Coating Processing Equipment with top quality

Twin Cheap made in China - replacement parts - in Mekele Ethiopia Screw Extruder for Powder Coating Processing Equipment with top quality

Double sales made in China – replacement parts – in Cape Town South Africa Screw Extruder Machine for Powder Coating with top quality

Double sales made in China - replacement parts - in Cape Town South Africa Screw Extruder Machine for Powder Coating with top quality

We – EPG Team the most significant gearbox & motors , torque limiter couplings and gears factory in China with 5 different branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Double Screw Extruder Equipment for Powder Coating
Large torque & High Speed Rotation Twin-Screw Extruder:
 
 
Internet site:  , cn

one. Major Functions:

*Simple to use and effortless to thoroughly clean

*Superior heating and by means of-shaft cooling

*certain energy and torque maximise output with no losing power

*Torque limiter to defend the push train

*Accurate and responsive temperature management above barrel

*Break up design of barrel and liner inserts for effortless cleansing and maintainence

*Best & Side feeding choices

*Stainless cover for security and appearance

two. Specialized Parameters:
 

Product Ability (kg/h) Diameter (mm) Screw Size (mm) Screw Pace (r/min) Primary Motor (kw) Feeder Motor (kw) Heating Electrical power (kw) All round Dimensions (mm)
TSX-40 eighty-260 40 16D -800 11/fifteen/18.five .fifty five 8 1850*seven hundred*1750
TSX-fifty two 150-450 52 16D -800 22/30/37 .75 10 2700*900*2200
TSX-sixty five four hundred-1000 sixty five 16D -800 45/fifty five/75 one.one twelve 2900*a thousand*2400
TSX-75 800-1200 seventy five 16D -800 75/ninety one.five 16 3100*1200*2500
TSX-85 1200-1800 85 16D -800 ninety/a hundred and ten two.2 twenty 3700*1500*2900

three. Company:

Xihu (West Lake) Dis.sunlight is a leading manufacturer in China of Powder Coating Manufacturing Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 several years of experiences of this ept and have exported to virtually thirty international locations and locations in the earlier ten many years, and win extensively excellent reputations.

We passed CE certification approval and ATEX explosion resistant test, and many others. intercontinental expectations, we do know how to meet the diversified and custom-made created requests of our buyers.

Our eternal company philosophy: consistant top quality, effective interaction, liable service.

one. Primary Functions:

*Total Gearbox from expert EPT maker, reduced sound, sturdy longevity
*Substantial screw speed, substantial shearing, fast discharge
*Independent lube oil cooling method layout
*Torque limiter to safeguard the generate teach
*Appropriate for reclaim powder, special powder production
*Break up layout of barrel and liner inserts for effortless cleansing and routine maintenance
*Leading & Side feeding choices
*Other functions exact same as standard variety extruder
two. Technological Parameters:

Product Potential (kg/h) Screw Diameter (mm) Screw Length (mm) Screw Speed (r/min) Major Motor (kw) Feeder Motor (kw) Heating Energy (kw) All round Proportions (mm)
TSX-forty eighty-260 forty 16D -800 eleven/fifteen/18.5 .55 8 1850*seven hundred*1750
TSX-52 150-450 52 16D -800 22/thirty/37 .75 ten 2700*900*2200
TSX-65 400-a thousand 65 16D -800 45/55/seventy five 1.1 12 2900*1000*2400
TSX-seventy five 800-1200 seventy five 16D -800 75/90 one.5 sixteen 3100*1200*2500
TSX-85 1200-1800 85 16D -800 90/one hundred ten two.two twenty 3700*1500*2900

3. Traditional Variety Co-Rotation Parallel Twin Screw Extruder

4. Attributes:

*Robust shearing, simple cleaning
*Precise auto temperature management, large cooling & heating exchagne
*Hinged clamshell sort barrel opening, segmented liners for effortless changing and expense preserving
*Feeder effortless assembly & disassembly, interior framework to keep away from agglomeration
*Configurable screw used for various powder formulas
*Screw and barrel adopt special supplies like Cr12MoV, CPM, and many others., high donning resisting
*Fairly gearbox with lower sound dB degree
*Torque limiter to safeguard the travel practice
*Minimal power intake

5. Complex Parameters:

Product Potential (kg/h) Screw Diameter (mm) Screw Size Screw Velocity (r/min) Primary Motor (kw) Feeder Motor (kw) Heating Energy (kw) General Proportions (mm)
SLJ-40 80-220 40 16D -500 eleven/fifteen/eighteen.5 .fifty five four 1800*600*1700
SLJ-fifty 150-three hundred 50 16D -500 22/30 .seventy five eight 2600*seven-hundred*2000
SLJ-55 300-400 55 16D -500 thirty/37 .seventy five eight 2700*900*2300
SLJ-sixty four hundred-600 60 16D -500 forty five 1.one 12 2750*1000*2350
SLJ-75 600-800 75 16D -500 fifty five 1.five twelve 2900*1100*2400
SLJ-eighty 800-1200 80 16D -500 seventy five/ninety 2.2 20 3700*800*2800

six. Specialized Parameters (Lab Sort):

HOW DOES A TORQUE LIMITER Operate? Torque Limiters make certain that torque-based forces by no means exceed the established position. By restricting torque forces to what the rotational components can safely and securely manage, these areas minimize mechanical overload and failures. They can work independently or in congruence with digital sensors. Sometimes, mechanical torque limiters are known as overload clutches.

Design Ability (kg/h) Screw Diameter (mm) Screw Length Screw Velocity (r/min) Major Motor (kw) Feeder Motor (kw) Heating Electricity (kw) Overall Dimensions (mm)
TSX-twenty .2-10 22 16D -600 2.2-four .one 2 1600*300*850
SLJ-30 1-30 thirty 16D -five hundred 3-5.five .18 3.two 1430*550*1300
SLJ-32 forty-80 32 16D -500 7.5/11 .25 3.2 1600*five hundred*1500

seven. Business: 

Xihu (West Lake) Dis.sun is a leading company in China of Powder Coating Creation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit thirty a long time of encounters in this ept and have exported to virtually thirty nations around the world and regions in the past ten years, and acquire commonly very good reputations.

We handed CE certification approval and ATEX explosion resistant examination, and so forth. global standards we do know how to meet the diversified and personalized produced requests of our customers.

Our everlasting organization philosophy: consistant good quality, powerful conversation, liable support.
 
8. Why picking us?

Our boss has labored in this ept for more than thirteen several years.
Our vice GM has worked in this ept for far more than twenty several years. 
Our technical supervisor has labored in this ept for much more than 7 years. 
Our creation supervisor has labored in this ept for far more than 8 years. 
We have an superb team. We are seasoned, excellent, friendly and liable, with a view to long time period cooperation.
 

The use of unique gear manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our company and the detailed alternative parts contained herein are not sponsored, approved, or manufactured by the OEM.

Double sales made in China - replacement parts - in Cape Town South Africa Screw Extruder Machine for Powder Coating with top quality

Double sales made in China - replacement parts - in Cape Town South Africa Screw Extruder Machine for Powder Coating with top quality

Double sales made in China - replacement parts - in Cape Town South Africa Screw Extruder Machine for Powder Coating with top quality

Powder Cost made in China – replacement parts – in Kolhapur India Coating Paint Extruder Twin Screw Extruder with top quality

Powder Cost made in China - replacement parts - in Kolhapur India Coating Paint Extruder Twin Screw Extruder with top quality

We – EPG Group the greatest gearbox & motors , torque limiter couplings and gears factory in China with 5 various branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

High torque & High Speed Rotation Twin-Screw Extruder:
Cell/ 🙁 0086)13655450504
 
Internet site:  , cn

Major Functions:

*Simple to use and easy to clean

*Sophisticated heating and by means of-shaft cooling

*specific power and torque maximise output with no wasting power

*Torque limiter to safeguard the push train

*Accurate and responsive temperature handle over barrel

*Break up design and style of barrel and liner inserts for effortless cleaning and maintainence

*Best & Side feeding possibilities

*Stainless include for protection and visual appeal

Complex Parameters:
 

Product Capacity (kg/h) Diameter (mm) Screw Length (mm) Screw Speed (r/min) Main Motor (kw) Feeder Motor (kw) Heating Energy (kw) All round Dimensions (mm)
TSX-40 eighty-260 40 16D -800 eleven/fifteen/18.5 .55 eight 1850*700*1750
TSX-fifty two 150-450 fifty two 16D -800 22/30/37 .75 10 2700*900*2200
TSX-65 four hundred-a thousand 65 16D -800 forty five/fifty five/75 1.one twelve 2900*one thousand*2400
TSX-seventy five 800-1200 seventy five 16D -800 seventy five/90 1.five sixteen 3100*1200*2500
TSX-85 1200-1800 85 16D -800 90/one hundred ten 2.two 20 3700*1500*2900

Organization:

Xihu (West Lake) Dis.sunshine is a leading company in China of Powder Coating Manufacturing Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit thirty a long time of ordeals of this ept and have exported to almost 30 countries and locations in the earlier ten several years, and win commonly great reputations.

We passed CE certification acceptance and ATEX explosion resistant examination, etc. global specifications, we do know how to satisfy the diversified and tailored made requests of our clients.

Our eternal enterprise philosophy: consistant quality, successful interaction, responsible support.

1. Principal Characteristics:

*Complete Gearbox from specialist EPT maker, lower sounds, tough longevity
*Substantial screw velocity, substantial shearing, fast discharge
*Impartial lube oil cooling method style
*Torque limiter to defend the push prepare
*Suited for reclaim powder, specific powder production
*Break up design and style of barrel and liner inserts for straightforward cleaning and upkeep
*Leading & Side feeding choices
*Other functions exact same as typical sort extruder
two. Complex Parameters:

Product Capacity (kg/h) Screw Diameter (mm) Screw Length (mm) Screw Pace (r/min) Major Motor (kw) Feeder Motor (kw) Heating Electrical power (kw) All round Proportions (mm)
TSX-forty eighty-260 forty 16D -800 11/fifteen/eighteen.5 .55 eight 1850*seven hundred*1750
TSX-fifty two one hundred fifty-450 52 16D -800 22/30/37 .seventy five 10 2700*900*2200
TSX-65 400-one thousand 65 16D -800 45/55/seventy five one.one twelve 2900*a thousand*2400
TSX-seventy five 800-1200 75 16D -800 seventy five/ninety 1.5 sixteen 3100*1200*2500
TSX-eighty five 1200-1800 85 16D -800 90/a hundred and ten 2.two twenty 3700*1500*2900

3. Typical Kind Co-Rotation Parallel Twin Screw Extruder

four. Attributes:

*Powerful shearing, easy cleaning
*Correct auto temperature manage, substantial cooling & heating exchagne
*Hinged clamshell sort barrel opening, segmented liners for simple changing and value saving
*Feeder straightforward assembly & disassembly, inner construction to steer clear of agglomeration
*Configurable screw applied for distinct powder formulas
*Screw and barrel undertake particular components like Cr12MoV, CPM, and many others., substantial putting on resisting
*Quite gearbox with low sounds dB stage
*Torque limiter to safeguard the travel practice
*Reduced strength consumption

five. Specialized Parameters:

Model Capacity (kg/h) Screw Diameter (mm) Screw Length Screw Speed (r/min) Principal Motor (kw) Feeder Motor (kw) Heating Energy (kw) Overall Proportions (mm)
SLJ-forty eighty-220 40 16D -five hundred eleven/15/18.five .fifty five four 1800*600*1700
SLJ-50 150-three hundred fifty 16D -five hundred 22/thirty .seventy five eight 2600*seven-hundred*2000
SLJ-55 300-400 55 16D -five hundred thirty/37 .75 eight 2700*900*2300
SLJ-60 400-600 60 16D -five hundred 45 1.one 12 2750*1000*2350
SLJ-seventy five 600-800 75 16D -500 55 one.five 12 2900*1100*2400
SLJ-eighty 800-1200 80 16D -500 75/90 2.two twenty 3700*800*2800

6. Specialized Parameters (Lab Type):

Design Capability (kg/h) Screw Diameter (mm) Screw Duration Screw Pace (r/min) Main Motor (kw) Feeder Motor (kw) Heating Electricity (kw) Overall Proportions (mm)
TSX-20 .2-ten 22 16D -600 2.2-4 .1 two 1600*three hundred*850
SLJ-30 one-30 thirty 16D -five hundred 3-5.5 .18 3.two 1430*550*1300
SLJ-32 forty-eighty 32 16D -five hundred 7.5/eleven .twenty five 3.2 1600*500*1500

seven. Firm: 

Xihu (West Lake) Dis.sunshine is a leading producer in China of Powder Coating Generation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit thirty a long time of encounters in this ept and have exported to nearly thirty nations around the world and areas in the past 10 many years, and acquire extensively very good reputations.

We passed CE certification approval and ATEX explosion resistant examination, etc. global expectations we do know how to meet up with the diversified and custom-made made requests of our consumers.

Our everlasting enterprise philosophy: consistant top quality, effective interaction, accountable provider.
 
eight. Why picking us?

Our manager has worked in this ept for much more than thirteen years.
Our vice GM has worked in this ept for a lot more than twenty many years. 
Our complex manager has worked in this ept for more than 7 years. 
Our production manager has worked in this ept for more than 8 years. 
We have an superb team. We are skilled, outstanding, pleasant and liable, with a view to extended term cooperation.
 

The use of authentic products manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our business and the listed substitution areas contained herein are not sponsored, approved, or made by thAll Torque Limiters are automatic protection products to stop overload, providing dependable operations and adjustable features The Torque Limiter with a sprocket is standardized, preserving you the hassle of machining and assembly Reliably guards your device by way of effortless handlinge OEM.

Powder Cost made in China - replacement parts - in Kolhapur India Coating Paint Extruder Twin Screw Extruder with top quality

Powder Cost made in China - replacement parts - in Kolhapur India Coating Paint Extruder Twin Screw Extruder with top quality

Powder Cost made in China - replacement parts - in Kolhapur India Coating Paint Extruder Twin Screw Extruder with top quality

Twin supplier made in China – replacement parts – in Asuncion Paraguay Screw Extruder Powder Coatings Manufacturing with EPT Brand with top quality

Twin supplier made in China - replacement parts - in Asuncion Paraguay Screw Extruder Powder Coatings Manufacturing with EPT Brand with top quality

We – EPG Team the biggest gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 diverse branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

  

 

  

 
 
Website:  , cn

High torque & High Velocity Rotation Twin-Screw Extruder:

Main Functions:

*Easy to use and effortless to clean

*Superior heating and by way of-shaft cooling

*specific energy and torque maximise output with no throwing away strength

*Torque limiter to protect the generate practice

*Exact and responsive temperature control above barrel

*Break up layout of barrel and liner inserts for straightforward cleaning and maintainence

*Best & Side feeding choices

*Stainless protect for protection and physical appearance

Complex Parameters:
 

Design Capability (kg/h) Diameter (mm) Screw Length (mm) Screw Velocity (r/min) Main Motor (kw) Feeder Motor (kw) Heating Electricity (kw) All round Proportions (mm)
TSX-forty eighty-260 forty 16D -800 11/fifteen/18.5 .55 8 1850*seven-hundred*1750
TSX-52 a hundred and fifty-450 fifty two 16D -800 22/30/37 .seventy five ten 2700*900*2200
TSX-65 400-1000 65 16D -800 45/fifty five/75 one.one 12 2900*a thousand*2400
TSX-75 800-1200 75 16D -800 75/ninety 1.5 sixteen 3100*1200*2500
TSX-85 1200-1800 85 16D -800 ninety/110 2.2 20 3700*1500*2900

Firm:

Xihu (West Lake) Dis.sunlight is a leading producer in China of Powder Coating Manufacturing Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 years of activities of this ept and have exported to nearly thirty international locations and locations in the earlier 10 several years, and acquire broadly very good reputations.

We passed CE certification approval and ATEX explosion resistant take a look at, and so forth. international requirements, we do know how to meet up with the diversified and customized created requests of our customers.

Our eternal company philosophy: consistant quality, effective interaction, dependable provider.

Substantial torque & High Velocity Rotation Twin-Screw Extruder:

1. Major Functions:

*Full Gearbox from professional EPT maker, minimal sounds, resilient longevity
*High screw velocity, substantial shearing, quick discharge
*Independent lube oil cooling method style
*Torque limiter to defend the push train
*Suited for reclaim powder, particular powder creation
*Break up design and style of barrel and liner inserts for effortless cleansing and routine maintenance
*Top & Side feeding possibilities
*Other functions identical as typical variety extruder
two. Specialized Parameters:

Product Capacity (kg/h) Screw Diameter (mm) Screw Length (mm) Screw Speed (r/min) Principal Motor (kw) Feeder Motor (kw) Heating Power (kw) All round Proportions (mm)
TSX-40 80-260 forty 16D -800 11/15/eighteen.five .fifty five 8 1850*seven-hundred*1750
TSX-fifty two one hundred fifty-450 fifty two 16D -800 22/thirty/37 .seventy five 10 2700*900*2200
TSX-sixty five 400-a thousand sixty five 16D -800 forty five/55/75 one.1 twelve 2900*1000*2400
TSX-seventy five 800-1200 75 16D -800 seventy five/ninety 1.5 16 3100*1200*2500
TSX-85 1200-1800 eighty five 16D -800 90/110 two.2 20 3700*1500*2900

three. Traditional Type Co-Rotation Parallel Twin Screw Extruder

4. Functions:

*Strong shearing, simple cleansing
*Precise auto temperature handle, large cooling & heating exchagne
*Hinged clamshell kind barrel opening, segmented liners for straightforward replacing and expense preserving
*Feeder simple assembly & disassembly, inner construction to stay away from agglomeration
*Configurable screw utilized for different powder formulas
*Screw and barrel undertake specific supplies like Cr12MoV, CPM, and many others., higher sporting resisting
*Very gearbox with lower sounds dB stage
*Torque limiter to shield the generate train
*Minimal power use

5. Specialized Parameters:

Design Capability (kg/h) Screw Diameter (mm) Screw Length Screw Pace (r/min) Main Motor (kw) Feeder Motor (kw) Heating Electricity (kw) General Dimensions (mm)
SLJ-forty eighty-220 40 16D -500 11/15/eighteen.5 .55 four 1800*600*1700
SLJ-fifty a hundred and fifty-three hundred fifty 16D -five hundred 22/30 .seventy five eight 2600*700*2000
SLJ-55 three hundred-400 fifty five 16D -500 thirty/37 .seventy five eight 2700*900*2300
SLJ-sixty 400-600 60 16D -five hundred 45 one.one 12 2750*one thousand*2350
SLJ-seventy five 600-800 75 16D -five hundred fifty five one.5 twelve 2900*1100*2400
SLJ-80 800-1200 80 16D -five hundred seventy five/ninety 2.2 twenty 3700*800*2800

6. Technological Parameters (Lab Kind):

Product Ability (kg/h) Screw Diameter (mm) Screw Size Screw Velocity (r/min) Main Motor (kw) Feeder Motor (kw) Heating Energy (kw) General Dimensions (mm)
TSX-20 .2-10 22 16D -600 two.2-four .1 2 1600*300*850
SLJ-30 one-30 thirty 16D -five hundred three-5.five .eighteen three.two 1430*550*1300
SLJ-32 40-eighty 32 16D -five hundred seven.5/11 .twenty five three.two 1600*five hundred*1500

seven. Company: 

Xihu (West Lake) Dis.solar is a leading producer in China of Powder Coating Creation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit thirty years of activities in this ept and have exported to practically 30 nations and locations in the earlier 10 several years, and get broadly good reputations.

We handed CE certification approval and ATEX explosion resistant check, etc. intercontinental standards we do know how to fulfill the diversified and custom-made produced requests of our consumers.

Our everlasting enterprise philosophy: consistant good quality, powerful communication, liable provider.
 
8. Why picking us?

Our manager has labored in this ept for a lot more than 13 years.
Our vice GM has worked in this ept for far more than twenty many years. 
Our complex supervisor has labored in this ept for much more than 7 years. 
Our production manager has labored in this ept for a lot more than 8 years. 
We have an exceptional staff. We are experienced, superb, pleasant and accountable, with a view to prolonged phrase cooperation.
 

Procedure Without having OVERLOAD A DISC SPRING located beneath the ADJUSTMENT NUT applies a continuous, set quantity of power to the Generate DISCS and FRICTION DISCS.

The use of unique gear manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our company and the listed substitute elements contained herein are not sponsored, approved, or made by the OEM.

Twin supplier made in China - replacement parts - in Asuncion Paraguay Screw Extruder Powder Coatings Manufacturing with EPT Brand with top quality

Twin supplier made in China - replacement parts - in Asuncion Paraguay Screw Extruder Powder Coatings Manufacturing with EPT Brand with top quality

Twin supplier made in China - replacement parts - in Asuncion Paraguay Screw Extruder Powder Coatings Manufacturing with EPT Brand with top quality

Twin Custom made in China – replacement parts – in Sylhet Bangladesh Screw Extruder for Melt Blow PP for Surgical Masks with top quality

Twin Custom made in China - replacement parts - in Sylhet Bangladesh Screw Extruder for Melt Blow PP for Surgical Masks with top quality

We – EPG Team the greatest gearbox & motors , torque limiter couplings and gears factory in China with 5 diverse branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Twin screw Extruder for soften blow PP for surgical masks
Product Description:
ZheJiang ept technology Co.,Ltd is dedicate to dewvelop, style, and manufacture co-rotation, counter- rotation parallel twin screw extruder creation line. we combine and improve these activities to generate our transmission idea and type our core engineering” bilateral equipment symmetrical driving method”. The technological innovation permits our extruders have the advantages of “High torque, high effectiveness, low strength-consumption, high cost/overall performance ratio,prolonged services daily life.” We hold rate with the first course extruder manufactures in the entire world.

Exhibition:

Configuration feartures of HPL collection extruder
one. gearbox: bilatral symmetry equipment push program layout services life a lot more than 72000hrs, common torque coefficient=10.4, brand of bearing are Sweden SKF and Germany INA
two.Torque limiter:torque limiter imported from Germany
three.Barrel: built-in put on-resistant alloy metal liner Channel of barrel is annular jet sort, not simple to belocked
4.Scew shaft: materials of screw factor is W6Cr5Mo4V2 Substance of shaft is high imported from Finland.
five. Heating medium: heating rod imported For more data on Zero-Max’s mechanical torque limiter overload security devices, get in touch with us. Or, click here to discover your nearby sales representative. Shaft-to-Shaft Mount – Sort C By way of Shaft Mount – Kind B Stop of Shaft Mount – Type J Conclude of Shaft Mount – Type JF Kind S H-TLC Torque Limitersfrom Germany
six. Equipment frame: high rigidity total steel plate welding
Electrical method: PLC and instrument control for your decision management cabinet and energy cupboard are seperate, robust and weak electrical are isolated put in.

Technical datas of PHL62 sequence high standard extruder

Kind/DATAS PHL51
screw diameter 51mm
L/D 60:1
motor power 160KW
max speed  600
Large torque twelve
Oouput variety 300kg-450kg

Common software
Reinfoce modification:PP,PA,PBT, Ab muscles,, Laptop, POM, PPS, PET+Carbon fiber, glass fiber
Stuffed modification: PE, PP, EVA+CaCo3,talcum powder,titianium dioxide, carbon black and other inoranic filler
Masterbatch:colour masterbatch,flame retardant masterbatch,carbon black masterbatch,degradable masterbatch
Plastic alloy:Laptop+ Stomach muscles, PA+Stomach muscles, PA+PE, PBT+PET,and so on.
Specific Engineering Plastic: PEEK, PEI, PPS,PPSU, PA6T,PA9T,LCP,and so on.
Substantial compouding dispersion extrusion:nano materials, powder coating and fiber grade masterbatch
Reaction extrusion: polyreaction andpolycondension

 

speak to man or woman Chelsea Tian

 

The use of first equipment manufacturer’s (OEM) component quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our business and the detailed substitute areas contained herein are not sponsored, accepted, or manufactured by the OEM.

Twin Custom made in China - replacement parts - in Sylhet Bangladesh Screw Extruder for Melt Blow PP for Surgical Masks with top quality

Twin Custom made in China - replacement parts - in Sylhet Bangladesh Screw Extruder for Melt Blow PP for Surgical Masks with top quality

Twin Custom made in China - replacement parts - in Sylhet Bangladesh Screw Extruder for Melt Blow PP for Surgical Masks with top quality

75mm factory made in China – replacement parts – in Madrid Spain Screw Co-Rotating Parallel Plastic Masterbatch Filling and Compounding Twin Screw Plastic Extruder Machine Sale with top quality

75mm factory made in China - replacement parts - in Madrid Spain Screw Co-Rotating Parallel Plastic Masterbatch Filling and Compounding Twin Screw Plastic Extruder Machine Sale with top quality

We – EPG Group the greatest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 diverse branches. For far more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Parallel twin screw extruder utility assortment
 

Parallel twin-screw extruders are broadly employed in the filling, blending, modification, reinforcement, devolatilization of chlorinated polypropylene and tremendous absorbent resin degradable grasp batch polyamide polycondensation, extrusion by addition polSimply place, these units defend rotating factors from the danger of mechanical overload. Clutches, brakes, and Torque Limiters all slide beneath this classification. Torque Limiters, specifically, operate by slipping for the duration of torque overload to stop pushed factors from experiencing excessive torque loads. If a torque overload happens, the Torque Limiter is capable to defend vital products by disconnecting the driving shaft from the pushed parts.ymerization of polyurethane, granulation of carbon powder and magnetic powder, insulating and sheathing components for cables, lower smoke and minimal halogen flame retardant PVC cable components and preparing of various Silane crosslinkers, and many others. . Modest designs are largely utilised for scientific analysis and instructing.

Parallel twin screw extruder characteristics:
Parallel twin screw extrusion method:
The screw and the cylinder undertake the construction of “Constructing Block” , which has very good interchangeability and can be utilized in any blend according to the various material processing technology
The cylinder physique is manufactured of nitrided metal and bimetallic content, which is put on-resistant, corrosion-resistant and can extend its service daily life
Nitrided steel and substantial-pace steel are utilised for screw thread aspects, and the curve is manufactured of personal computer-aided style steel, which ensures normal tooth surface area clearance of screw thread wor ept part and excellent self-cleansing The toughness of the threaded element and the Mandrel is increased by the particular designed link and transmission,
The above actions comprehend the functions of uniform substance dispersion, excellent mixing and plasticizing result, Brief material retention time and substantial conveying effectiveness. 
Reduction System:
Adopt special reduction box of plastic machinery, transmission parts adopt large-top quality, tremendous-substantial alloy carburizing steel, combined with carburizing, quenching, equipment grinding approach, crucial elements are manufactured with area strengthening treatment, tooth area energy HRC54-62, main hardness HRC30-40, gear 6. The system has high velocity, higher torque, lower noise benefits and so on.
Feeding Technique:
Adopting twin screw with agitator quantitative feeding system, and the feeding process is uniform, accurate, without having shelf phenomenon.
Digital Control System:
IMPORTED ELECTRICAL Components, handle panel for man-device interface, “module” variety control for each element of the gear can also be configured according to consumer specifications. Multi-functional module construction is distinct, with protection interlock gadgets this kind of as lubrication loss of strain protection, head pressure safety, more than-existing safety, genuinely reflecting the equipment operation with supplied exact control, higher sensitivity, simple procedure.
Heating method:
Undertake forged aluminum, forged copper, ceramic resistance heating unit, heating is uniform, rapidly and with high temperature manage precision.
Temperature handle technique:
Double-channel temperature management speedometer realizs delicate response, easy temperature placing, simple adjustment, substantial temperature management precision.
Cooling technique:
Adopting two approaches from h2o cooling, gasoline cooling or air cooling. And the cooling process is even, rapidly and productive.
Vacuum system:
Created-in vacuum program, vacuum up to-.09 MPA, which can make certain the full plasticization of components and improve item high quality.
Auxiliary devices:
According to the various approach demands of end users, can pick cold pull bar pelleting, drag chain pelleting, air-cooled die surface scorching, h2o ring hot, and other forms of pelleting.

Configuration feartures of KSJ collection extruder
1. gearbox: bilatral symmetry equipment generate program style support daily life far more than 72000hrs, regular torque coefficient=10.4, brand name of bearing are Sweden SKF and Germany INA
2.Torque limiter:torque limiter imported from Germany
3.Barrel: built-in wear-resistant alloy steel liner Channel of barrel is annular jet type, not simple to belocked
4.Scew shaft: content of screw factor is W6Cr5Mo4V2 Substance of shaft is substantial imported from Finland.
5. Heating medium: heating rod imported from Germany
6. Machine body: higher rigidity whole metal plate welding
Electrical method: PLC and instrument manage for your option handle cupboard and electricity cabinet are seperate, powerful and weak electrical are isolated mounted.

Standard software
Reinfoce modification:PP,PA,PBT, Stomach muscles,, Personal computer, POM, PPS, PET+Carbon fiber, glass fiber
Crammed modification: PE, PP, EVA+CaCo3,talcum powder,titianium dioxide, carbon black and other inoranic filler
Masterbatch:color masterbatch,flame retardant masterbatch,carbon black masterbatch,degradable masterbatch
Plastic alloy:Personal computer+ Ab muscles, PA+Stomach muscles, PA+PE, PBT+PET,and many others.
Particular Engineering Plastic: PEEK, PEI, PPS,PPSU, PA6T,PA9T,LCP,and so on.
High compouding dispersion extrusion:nano content, powder coating and fiber grade masterbatch
Reaction extrusion: polyreaction andpolycondension

 

The use of first equipment manufacturer’s (OEM) part quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our company and the shown substitute elements contained herein are not sponsored, accredited, or made by the OEM.

75mm factory made in China - replacement parts - in Madrid Spain Screw Co-Rotating Parallel Plastic Masterbatch Filling and Compounding Twin Screw Plastic Extruder Machine Sale with top quality

75mm factory made in China - replacement parts - in Madrid Spain Screw Co-Rotating Parallel Plastic Masterbatch Filling and Compounding Twin Screw Plastic Extruder Machine Sale with top quality

75mm factory made in China - replacement parts - in Madrid Spain Screw Co-Rotating Parallel Plastic Masterbatch Filling and Compounding Twin Screw Plastic Extruder Machine Sale with top quality