limiter torque clutch

Item Description

Merchandise Description

Item Software
Spider Crane are ideal for cargo managing in the transportation market, substance movement in the building market, and heavy gear assembly in the producing market. It is specifically efficient for operation in slim spaces. It can be employed in putting in glass curtain wall, petrochemical pipes, railway building, equipment inspection and maintenance in workshop, electrical electrical power building or municipal development.
Merchandise Functions
1. 380V energy supply can obtain no noise, environmental defense and silent.
two. Easy to transportation forklift, crane with plug situation.
3. Interlock method: soon after the increase is reset, the outriggers can be operated and travel to protect the basic safety of the crane.
4. U-form growth: affordable composition, 1 welding seam, massive speak to location in between booms, high strength and prolonged life.
5. Outrigger by distant manage: can be managed at shut assortment to avoid accidents when the outriggers are not able to be witnessed for the duration of operations in complex environments.
6. Instant limiter: precisely show the bodyweight of the object to be hoisted. When hoisting, make positive to have a “variety” in thoughts to shield the safety of the growth.
7. Proportional remote handle, proportional solenoid valve:can handle the hoist from a prolonged distance and can make the hoisted excess weight move steadily. It is especially ideal for mechanical set up and employed in spots with higher situation precision demands.
eight. One-crucial leveling of outriggers: can be operated independently in accordance to the surrounding setting, or the computer can be employed to manage 4 outriggers at the same time to attain one-essential leveling, so that the automobile physique is usually in a horizontal state.
 

Item Parameters

EW3. Spider Crane Technical Parameter

Design: EW3. Spider Crane

Specification: 3t×1.3m

Maximum lifting torque: 53kN·m

Maximum floor lifting top: 9.7m

Lifting pace of hook: 5.5m/min (4 instances)

Wire rope specs: φ8×55

Boom kind: five-segment increase

Maximum Increase length: 9m

Luffing angle: -75°

Rotation angle: 360°full rotation

Outrigger type:Initial phase:automaticsecond phase:manually adjusted

Maximum extension length:(Entrance)3170×(Horizontal)3600×(Again)4050

Walking mode:Hydraulic motor drives the reducer to travel

Walking speed: -2.5km/h

Strolling system: crawler synthetic rubber

Climbing potential: 33%

Operating pressure: 18MPa

Hydraulic oil tank quantity:38L

General dimension: 2940×950×1600 (mm)

Equipment bodyweight: 2300kg

EW5. Spider Crane Technical Parameter

Design: EW5. Spider Crane

Specification: 5t×1.8m

Highest functioning radius: 16m

Greatest ground lifting height: 16.9m

Lifting pace of hook:10m/min (4 instances)

Wire rope diameter and length: Φ10mm×80m

Increase sort: 5-segment boom

Growth length: 16.6m

Growth angle: -80°

Rotation angle: 360°continuous rotation

Highest extension distance:
(entrance) 5170* (horizontal) 5807* (rear) 5423mm

Outrigger type: frog style

Going for walks method:hydraulic strolling

Strolling speed: -3km/h

Strolling gadget: crawler artificial rubber

Climbing ability: 32%

Ground pressure: 41.3kPa

Hydraulic oil tank quantity:38L

Overall size: 5000×1370×1980 (mm)

Machine excess weight: 5500kg

EW8. Spider Crane Technical Parameter

Product: EW8. Spider Crane

Specification: 8t×2.5m

Highest operating radius: fifteen.7m

Maximum ground lifting peak: 17.8m

Lifting velocity of hook:10m/min (4 ropes)

Wire rope diameter and size: Φ12mm×120m

Boom type: Five-section growth

Growth length: 4.65m-sixteen.4m

Boom angle/time: -80°/24.5sec

Rotation angle: -360°continuous rotation

Outrigger sort: Manually adjustment for 1 part. Computerized for the 2,3 section

Optimum extension amplitude:
(entrance) 5510* (horizontal) 5670* (rear) 5030mm

Going for walks method:Hydraulic motor

Strolling speed: -1.5km/h

Staring Method:electrical starting up

Climbing capability: 20°

Floor Force:49kPa

Floor Length×Width:1720×320mm

Total dimensions: 5033×1560×2278 (mm)

Equipment weight: 6500kg

EW12. Spider Crane Specialized Parameter

Product: EW12. Spider Crane

Specification: 12t

Maximum working radius: 19.8m

Greatest floor lifting height: 21m

Lifting velocity of hook:11m/min (4 instances)

Wire rope diameter and length: Φ14mm×80m

Growth kind: 6-area growth

Boom length: 5.7m-19.8m

Growth angle/time: -78°/13sec

Rotation angle/pace: -360°continuous rotation/38sec

Outrigger kind: Manually unscrew + hydraulic growth + automatic support (two sections)

Optimum extension amplitude:
Remaining and right (7400mm) before and following (8190mm)

Going for walks mode:Hydraulic motor drive

Going for walks velocity: -2.5km/h

Staring Technique:electrical commencing

Climbing capability: 20°(36%)

Startup efficiency: -5°C-40°C

Eternalwin measurement:3200×400mm

Total measurement: 5700×1800×2400 (mm)

Equipment bodyweight: 11500kg

Packaging & Shipping

 

Business Profile

 

FAQ

1. What following-sale support do you offer?
We have skilled product sales crew and technological group for all buyer. We can provide 24 several hours a working day for you.

2. What payment methods do you help?
We have numerous varieties of payment for your reference ,such as Western Union, Paypal, L/C, T/T and so on.

3. How to shipping the merchandise?

We often cargo items by sea,which is more affordable than by air. It depends on your particular prerequisite.

four. What is your warranty support about machine?

Our equipment has 1 calendar year warranty time, and our engineering crew available for oversea services with crane installation, inspection and commissioning.

5. What is your trade terms?

We have EXW, FOB, CIF, CFR for you to decide on, and we can modify according to your demands.

6.Why ought to I select your goods?

We can offer high top quality and minimal price items for you.

US $5,000-25,000
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

After-sales Service: Support
Max. Lifting Height: 21m
Rated Loading Capacity: 12t

###

Customization:

###

EW3.0 Spider Crane Technical Parameter
Model: EW3.0 Spider Crane
Specification: 3t×1.3m
Maximum lifting torque: 53kN·m
Maximum ground lifting height: 9.7m
Lifting speed of hook: 5.5m/min (4 times)
Wire rope specifications: φ8×55
Boom form: five-section boom
Maximum Boom length: 9m
Luffing angle: 0-75°
Rotation angle: 360°full rotation
Outrigger form:First stage:automatic;second stage:manually adjusted
Maximum extension distance:(Front)3170×(Horizontal)3600×(Back)4050
Walking mode:Hydraulic motor drives the reducer to travel
Walking speed: 0-2.5km/h
Walking device: crawler synthetic rubber
Climbing ability: 33%
Working pressure: 18MPa
Hydraulic oil tank volume:38L
Overall size: 2940×950×1600 (mm)
Machine weight: 2300kg

###

EW5.0 Spider Crane Technical Parameter
Model: EW5.0 Spider Crane
Specification: 5t×1.8m
Maximum operating radius: 16m
Maximum ground lifting height: 16.9m
Lifting speed of hook:10m/min (4 times)
Wire rope diameter and length: Φ10mm×80m
Boom form: five-section boom
Boom length: 16.6m
Boom angle: 0-80°
Rotation angle: 360°continuous rotation
Maximum extension distance:
(front) 5170* (horizontal) 5807* (rear) 5423mm
Outrigger form: frog style
Walking mode:hydraulic walking
Walking speed: 0-3km/h
Walking device: crawler synthetic rubber
Climbing ability: 32%
Ground pressure: 41.3kPa
Hydraulic oil tank volume:38L
Overall size: 5000×1370×1980 (mm)
Machine weight: 5500kg

###

EW8.0 Spider Crane Technical Parameter
Model: EW8.0 Spider Crane
Specification: 8t×2.5m
Maximum operating radius: 15.7m
Maximum ground lifting height: 17.8m
Lifting speed of hook:10m/min (4 ropes)
Wire rope diameter and length: Φ12mm×120m
Boom form: Five-section boom
Boom length: 4.65m-16.4m
Boom angle/time: 0-80°/24.5sec
Rotation angle: 0-360°continuous rotation
Outrigger form: Manually adjustment for 1 section. Automatic for the 2,3 section
Maximum extension amplitude:
(front) 5510* (horizontal) 5670* (rear) 5030mm
Walking mode:Hydraulic motor
Walking speed: 0-1.5km/h
Staring Method:electrical starting
Climbing ability: 20°
Ground Pressure:49kPa
Ground Length×Width:1720×320mm
Overall size: 5033×1560×2278 (mm)
Machine weight: 6500kg

###

EW12.0 Spider Crane Technical Parameter
Model: EW12.0 Spider Crane
Specification: 12t
Maximum operating radius: 19.8m
Maximum ground lifting height: 21m
Lifting speed of hook:11m/min (4 times)
Wire rope diameter and length: Φ14mm×80m
Boom form: six-section boom
Boom length: 5.7m-19.8m
Boom angle/time: 0-78°/13sec
Rotation angle/speed: 0-360°continuous rotation/38sec
Outrigger form: Manually unscrew + hydraulic expansion + automatic support (two sections)
Maximum extension amplitude:
Left and right (7400mm) before and after (8190mm)
Walking mode:Hydraulic motor drive
Walking speed: 0-2.5km/h
Staring Method:electrical starting
Climbing ability: 20°(36%)
Startup performance: -5°C-40°C
Eternalwin size:3200×400mm
Overall size: 5700×1800×2400 (mm)
Machine weight: 11500kg
US $5,000-25,000
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

After-sales Service: Support
Max. Lifting Height: 21m
Rated Loading Capacity: 12t

###

Customization:

###

EW3.0 Spider Crane Technical Parameter
Model: EW3.0 Spider Crane
Specification: 3t×1.3m
Maximum lifting torque: 53kN·m
Maximum ground lifting height: 9.7m
Lifting speed of hook: 5.5m/min (4 times)
Wire rope specifications: φ8×55
Boom form: five-section boom
Maximum Boom length: 9m
Luffing angle: 0-75°
Rotation angle: 360°full rotation
Outrigger form:First stage:automatic;second stage:manually adjusted
Maximum extension distance:(Front)3170×(Horizontal)3600×(Back)4050
Walking mode:Hydraulic motor drives the reducer to travel
Walking speed: 0-2.5km/h
Walking device: crawler synthetic rubber
Climbing ability: 33%
Working pressure: 18MPa
Hydraulic oil tank volume:38L
Overall size: 2940×950×1600 (mm)
Machine weight: 2300kg

###

EW5.0 Spider Crane Technical Parameter
Model: EW5.0 Spider Crane
Specification: 5t×1.8m
Maximum operating radius: 16m
Maximum ground lifting height: 16.9m
Lifting speed of hook:10m/min (4 times)
Wire rope diameter and length: Φ10mm×80m
Boom form: five-section boom
Boom length: 16.6m
Boom angle: 0-80°
Rotation angle: 360°continuous rotation
Maximum extension distance:
(front) 5170* (horizontal) 5807* (rear) 5423mm
Outrigger form: frog style
Walking mode:hydraulic walking
Walking speed: 0-3km/h
Walking device: crawler synthetic rubber
Climbing ability: 32%
Ground pressure: 41.3kPa
Hydraulic oil tank volume:38L
Overall size: 5000×1370×1980 (mm)
Machine weight: 5500kg

###

EW8.0 Spider Crane Technical Parameter
Model: EW8.0 Spider Crane
Specification: 8t×2.5m
Maximum operating radius: 15.7m
Maximum ground lifting height: 17.8m
Lifting speed of hook:10m/min (4 ropes)
Wire rope diameter and length: Φ12mm×120m
Boom form: Five-section boom
Boom length: 4.65m-16.4m
Boom angle/time: 0-80°/24.5sec
Rotation angle: 0-360°continuous rotation
Outrigger form: Manually adjustment for 1 section. Automatic for the 2,3 section
Maximum extension amplitude:
(front) 5510* (horizontal) 5670* (rear) 5030mm
Walking mode:Hydraulic motor
Walking speed: 0-1.5km/h
Staring Method:electrical starting
Climbing ability: 20°
Ground Pressure:49kPa
Ground Length×Width:1720×320mm
Overall size: 5033×1560×2278 (mm)
Machine weight: 6500kg

###

EW12.0 Spider Crane Technical Parameter
Model: EW12.0 Spider Crane
Specification: 12t
Maximum operating radius: 19.8m
Maximum ground lifting height: 21m
Lifting speed of hook:11m/min (4 times)
Wire rope diameter and length: Φ14mm×80m
Boom form: six-section boom
Boom length: 5.7m-19.8m
Boom angle/time: 0-78°/13sec
Rotation angle/speed: 0-360°continuous rotation/38sec
Outrigger form: Manually unscrew + hydraulic expansion + automatic support (two sections)
Maximum extension amplitude:
Left and right (7400mm) before and after (8190mm)
Walking mode:Hydraulic motor drive
Walking speed: 0-2.5km/h
Staring Method:electrical starting
Climbing ability: 20°(36%)
Startup performance: -5°C-40°C
Eternalwin size:3200×400mm
Overall size: 5700×1800×2400 (mm)
Machine weight: 11500kg

Different Types of Limiter Torque Offsets

Whether you are looking for an over or offset torque limiter, or you are simply looking for the correct torque measurement device to suit your needs, there are a number of different options available to you.limiter torque

Over-torque limiters

Choosing the right torque limiters can help to protect your machine from damage. These devices are used in sheet metal and textile machinery, printing and converting machines, industrial robots, and conveyors.
Torque limiters are devices that protect equipment from damage caused by overloads. These devices are usually mechanical, but can also be electronic. Electronic overload protection monitors a variety of parameters, including rotational frequency, current, voltage, and pressure. They can also be programmed to monitor temperature.
The most common mechanical torque limiters are shear-pins and slip-clutches. These devices are usually installed in gears, shafts, motors, pumps, or servos. These devices disengage the drive line before an electronic device, preventing damage from accumulated rotational energy.
Torque limiters have also been used for years in marine applications. These devices are installed as close to the point of impact as possible.
Torque limiters have also been installed in servos and stepper motors. They are intended to eliminate mechanical overloads that can cause unplanned downtime. They also prevent damage from misuse or accidents.
Torque limiters are also used in conveyors and other assembly lines. These devices protect against over-torque situations, which can damage drive motors and drive components. These devices are used in woodworking machines, printing and converting machines, and industrial robots. They also provide an effective means of coupling gears and sprockets.
Torque limiters come in a variety of styles and models. To determine which device is right for your application, contact a manufacturer or a specialist. Choosing the right one can help to protect your machine from damage at an affordable cost.
Torque limiters are not designed to operate in a continuous slip environment. They should be selected based on the type of machine you are operating and the torque load you expect to generate. They should also be installed near the point of impact to avoid accidents.
The mechanical torque limiter is the most common type of slip clutch. It uses special springs with negative spring rates to avoid false trips. This design has been improved over the years from the simple slip-clutch.
The electronic overload protection is also an option, especially if you are using more advanced drive systems. It can monitor a variety of parameters, including rotational speed, rotational frequency, current, voltage, and position.limiter torque

Offset torque limiters

Using Limiter Torque Offsets can protect your machinery from overloads. These devices are designed to protect rotating parts. They can be used in a variety of ways. You can mount a pulley or a sprocket in a torque limiter. They can be installed in any machine shop.
Torque Limiters, also called slip clutches, are used to protect rotating components from overloads. They can also be used to protect machines from crashes. These devices use friction disks to transmit force from a driving shaft to a driven member. They can also be used with electronic sensors to protect rotating parts.
A torque limiter, or slip clutch, is a mechanical overload protection device that transmits torque from the driven shaft to the driven member through friction disks. Some torque limiters use friction plates. Others use backstop clutches that transmit torque in reverse. These devices can be used in many applications, including the construction industry, automotive industry, and manufacturing.
Torque Limiters work by disconnecting the drive shaft from the driven member during overloads. This ensures that the rotating components can operate without damage. Torque Limiters are available in a variety of styles and designs. Some limiters are spring-loaded. Some have compression adjustment, which allows them to be reset automatically.
Friction-disc torque limiters are a great option for applications that require constant running. They can be used in applications where a torque limiter may be part of a gearset assembly. They provide moderate adherence to a safe-torque setting. However, they may be susceptible to damage.
The torque limiter is typically the last gearset in the transmission. The drive sprocket must be sized based on the amount of torque that is needed to disengage the drive. A torque limiter can be mounted directly or via an adapter plate. It is important to center the drive sprocket over the bearing. This is done by machining the drive attachment.
Ball detent torque limiters can be used in single-position or multiple-position configurations. They can also be used in hub or hub/sprocket combinations. They can be manually reset, or can be set dynamically.
Using Limiter Torque Offsets is a quick and easy way to protect your equipment. Torque Limiters can be used with a wide range of applications, and you can easily adjust the size to suit your needs.limiter torque

Ball detent torque limiters

Using a torque limiter protects equipment, such as sensitive machinery, from overloads. A torque limiter may be a mechanical device or an electronic device. Both types protect rotating machine components.
A mechanical torque limiter engages with the driven side of a machine through a small groove. A ball or roller is then inserted into the groove. The balls or rollers are then hardened to at least Rc 60. These components are then held in detents on the shaft. The balls and rollers slide out of the detents when the torque limiter experiences overload. The balls and rollers are then re-engaged when the overload is removed.
Some torque limiters use a snap-acting spring to release torque. Others use a pneumatic control system, which uses air pressure to force the ball detent device to disengage. Some systems also offer a random reset device.
Torque limiters are used in a variety of applications, including food and textile processing, packaging, and packaging and transportation. They are also commonly used in sewage treatment plants. They offer a wide variety of options, such as chain couplings, overload detector mechanisms, and various combinations.
A ball detent torque limiter provides a high level of accuracy. Its ability to automatically engage and disengage makes it a good option for applications where accuracy is important. Its design also provides the operator with a reliable torque limiter without needing manual intervention.
Torque limiters have many applications, including limiting transmission torque, protecting sensitive equipment, and controlling the torque of an axis. Some models can also be used in combination with electronic overload protection. Some models feature adjustable overload settings, which automatically disengage the torque limiter when the overload occurs. The torque limiter’s size and configuration should be determined based on the torques experienced by the axis. A torque limiter should also be designed to fully disengage the driven and driving components.
The two main types of torque limiters are mechanical and pneumatic. A pneumatic torque limiter will require a pneumatic control system, which utilizes air pressure to disengage the torque limiter in case of overload. A mechanical torque limiter will engage with the driven side of a machine through balls or rollers that are inserted into sockets on the pressure flange.

Measuring torque limiter output flange

Whether you are designing a new machine or repairing one, you need to know how to measure torque limiter output flange to ensure that your equipment is functioning properly. The torque limiter can help you protect your drive motors and gearboxes from costly damage. These devices are used in industrial robots, conveyors, woodworking machines, and printing and converting machines.
Torque limiters are light in weight and low in cost. They are also easy to install and maintain. When your machine is overloaded, the torque limiter acts as a clutch to disengage the input and output shafts. This reduces the potential for malfunction, and provides a higher level of reliability.
Torque limiters are available in two different types. The friction type uses spring loaded friction disks that slip when the torque exceeds a certain threshold. The other type uses permanent magnets mounted to each shaft. The magnetic torque limiter is a fast acting and effective way to limit torque.
Torque limiters also work with electronic sensors. During an overload condition, the torque limiter will disengage the input and output shafts within fractions of a second. This eliminates the possibility of a mechanism malfunction.
Torque limiters come in many shapes and sizes. The size of the body depends on the torque load and disengagement torque. The basic model features a flange for parallel shafts. However, more advanced models use pneumatic technology and use balls or rollers in sockets. This allows for a higher level of torque setting sensitivity.
Measuring torque limiter output flange requires that you measure the outside diameter of the sprocket. The inside diameter should match the centering diameter of the output flange. For a larger diameter, a tolerance of about half-inch is recommended. You should also check to ensure that the sprocket face is square. This is important for clearance.
Torque limiters are used in industrial robots, assembly lines, and sheet metal processing equipment. They can also be used in textile machinery. They are high in reliability and low in cost. This is why they are used so widely.
Torque limiters are also useful in preventing a situation where only one rudder surface operates. A torque limiter can also be used to prevent torque transmission through axial displacement. This prevents the drive shaft from spinning and causing damage to the test piece.
 limiter torque clutch limiter torque clutch
editor by czh 2023-03-23