Product Description

***RHD Euro 2 CZPT CZPT 4X2 Flatbed truck with crane on sale *** 

ZheJiang FUYA VEHICLE CO.,LTD
Products–100% First Class!
Transportation–100% Convenience, Efficient!
Services–24hours service!

———————————————————————————

» I. Product Describution: 
 

Truck mounted crane is also called truck crane, crane truck, truck with lifting crane, loader cranes, hiab crane truck and etc. It can be equipped with different truck chassis and different loading capacities of cranes .The truck mounted crane is mainly used in stations, warehouses, docks, construction sites, field rescue and other places for transporation and lifting.

It’s a cargo lorry truck with hiab crane,which could be telescopic boom crane or foldable boom crane.

FEATURE:

Pre Sale Service: 1. Technical Communication With Engineer                          
                               2. Factory and Workshop Visit.                          
                               3. Making Design Drawings according to customer request.

After Sale Service: 1. Customizing Installation & Commissioning
                                 2. Spare Parts Support
                                 3. Technical Support

Chassis: According to your request, choose various chassis and refit it to truck.,
                such as:I’SUZU,XIHU (WEST LAKE) DIS.FENG,SINOTRUCK,JAC,SHACMAN,FOTON,FAW …

Upper Body: Can supply only upper body without chassis according to your chassis drawing , design function parts like as below photos

Crane brand:  China various famous brand, Chengli, MT , FUYA , S-ANY, or others

Customization: Communicate with engineer, making design drawings and produce customized products.

Spare Parts: Supply all kinds of spare parts on chassis and upper body, replace main parts on trucks as tank and box.

Warranty: From the date of receiving, in normal using within 30,000 km or within 1 year, we will repair for free,Technical support and commissioning are free always.

 

» II.Product Parameter:

 

4×2 4000kg Used cheap 4ton telescopic boom truck mounted crane
Chassis
Main specification		Chassis brand		Xihu (West Lake) Dis.feng (HOWO/I-SUZU/Shacman etc in optional)
		Overall dimension(L*W*H)		9900x2500x3800mm
		Cargo body dimension		5000x2300x550mm
Chassis		Drive modle		4×2  Left hand drive (Right Hand Drive in optional)
		Wheel Base		4600mm +1400mm
		Tyre size & number		11.00r20, 10pcs with 1 spare tyre
		Axles		5Tons/ 10Tons x2
		Transmission		Manual type, 8F+2R
		Frame		Double layer 280
		Engine		Cummins /Chaochai/Yuchai/Weichai
		Engine horse power		170hp/190hp/210hp
		Engine Emission standard		Euro 3, diesel
Crane
Crane Model		5-25 tons as need		Max. lifting capacity		10 tons
Arm Number		3 telescopic arms		Rotation Angle		360° all Rotation
Type of Crane		Straight boom crane		Max lifting altitude		14m
Rear Hydraulic Landing Legs		Equipped		Max working radius		5.5m

» III.Product Details:  

3.1. Optional choice for Crane truck 

3.2. Crane truck process and configuration:

Δ  Strengthened Cross-beam Girder reinforced structure of secondary beam, with strong carrying capacity.

Δ  Customized Cargo Cargo size, material and appearance can be customized as customer’s requirements.

Δ  Telescopic Boom lifting capacity from 1ton to 25tons, China various famous brand aviable.

Δ  Foldable boom lifting capacity from 1ton to 30tons, China various famous brand aviable.

Δ  Aerial Work Seat Aerial operation, work vision is wider.

Δ  Front & Rear Hydraulic Outriggers Double arms double cavity CZPT type hydraulic outriggers, more stable

IV. SHIPPING: RORO/BULK VESSEL/CONTAINER 

RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.

BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.

CONTAINER: The truck is put into the container. This model is used for small model trucks

V. ABOUT US

ZheJiang FUYA VEHICLE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,
sales and service in special trucks like as boom truck, fire truck, manlift truck, tank truck, garbage truck, tipper truck, wrecker 
truck, refrigerated truck, water truck, etc. 

Our main products:

Exporting
As Manufacturer, We Have Our Own License Of Import And Export.We Have Successfully Exported To Ghana, Sudan, Nigeria,
Angola ,Tajikistan, Namibia, Burma, Korea, Iran,American,Afghanistan,Iraq And Some Other Countries.The Development Of Our
Factory Is Getting Better And Better.

After Sales Service
Answer and solve your questions and consult within 24 hours
Overseas job site service available
One year guarantee about 3 key parts(axle, engine, transmission).Other spare parts could be supplied by cost price.
Other services:
1.All trucks and trailers are new and be customized to meet all your requirement.
2. All trucks and trailers are with 12 months quality guarantee.
3. CKD and SKD are available.
4. Technical support are provided.

FAQ
1.Our price term: FOB ZheJiang as common, other port is also acceptable.
2. Our Payment term: T/T, 30% deposit after order confirmation, 70% balance should be paid before delivery.
3. Delivery time: the delivery time is 20-30 days as common, the exact delivery time depends on the order and the current
    production condition.

If you are interested in our trucks, pls contact me, I will send our best quotation to you.

Contact person
Sale Manager: CZPT Wang 

 

US $35,000-45,000 / Piece |

1 Piece (Min. Order)

###

After-sales Service:	Offer After-Sales Service or Training
Warranty:	One Year
Certification:	ISO9001
Condition:	New
Maximum Lifting Height:	10-15m
Maximum Lifting Weight:	8-10t

###

Customization:	Available | Customized Request

###

4×2 4000kg Used cheap 4ton telescopic boom truck mounted crane
Chassis
Main specification		Chassis brand		Dongfeng (HOWO/I-SUZU/Shacman etc in optional)
		Overall dimension(L*W*H)		9900x2500x3800mm
		Cargo body dimension		5000x2300x550mm
Chassis		Drive modle		4×2  Left hand drive (Right Hand Drive in optional)
		Wheel Base		4600mm +1400mm
		Tyre size & number		11.00r20, 10pcs with one spare tyre
		Axles		5Tons/ 10Tons x2
		Transmission		Manual type, 8F+2R
		Frame		Double layer 280
		Engine		Cummins /Chaochai/Yuchai/Weichai
		Engine horse power		170hp/190hp/210hp
		Engine Emission standard		Euro 3, diesel
Crane
Crane Model		5-25 tons as need		Max. lifting capacity		10 tons
Arm Number		3 telescopic arms		Rotation Angle		360° all Rotation
Type of Crane		Straight boom crane		Max lifting altitude		14m
Rear Hydraulic Landing Legs		Equipped		Max working radius		5.5m

###

Δ  Strengthened Cross-beam Girder reinforced structure of secondary beam, with strong carrying capacity.

Δ  Customized Cargo Cargo size, material and appearance can be customized as customer’s requirements.

###

Δ  Telescopic Boom lifting capacity from 1ton to 25tons, China various famous brand aviable.

Δ  Foldable boom lifting capacity from 1ton to 30tons, China various famous brand aviable.

###

Δ  Aerial Work Seat Aerial operation, work vision is wider.

Δ  Front & Rear Hydraulic Outriggers Double arms double cavity composite type hydraulic outriggers, more stable

US $35,000-45,000 / Piece |

1 Piece (Min. Order)

###

After-sales Service:	Offer After-Sales Service or Training
Warranty:	One Year
Certification:	ISO9001
Condition:	New
Maximum Lifting Height:	10-15m
Maximum Lifting Weight:	8-10t

###

Customization:	Available | Customized Request

###

4×2 4000kg Used cheap 4ton telescopic boom truck mounted crane
Chassis
Main specification		Chassis brand		Dongfeng (HOWO/I-SUZU/Shacman etc in optional)
		Overall dimension(L*W*H)		9900x2500x3800mm
		Cargo body dimension		5000x2300x550mm
Chassis		Drive modle		4×2  Left hand drive (Right Hand Drive in optional)
		Wheel Base		4600mm +1400mm
		Tyre size & number		11.00r20, 10pcs with one spare tyre
		Axles		5Tons/ 10Tons x2
		Transmission		Manual type, 8F+2R
		Frame		Double layer 280
		Engine		Cummins /Chaochai/Yuchai/Weichai
		Engine horse power		170hp/190hp/210hp
		Engine Emission standard		Euro 3, diesel
Crane
Crane Model		5-25 tons as need		Max. lifting capacity		10 tons
Arm Number		3 telescopic arms		Rotation Angle		360° all Rotation
Type of Crane		Straight boom crane		Max lifting altitude		14m
Rear Hydraulic Landing Legs		Equipped		Max working radius		5.5m

###

Δ  Strengthened Cross-beam Girder reinforced structure of secondary beam, with strong carrying capacity.

Δ  Customized Cargo Cargo size, material and appearance can be customized as customer’s requirements.

###

Δ  Telescopic Boom lifting capacity from 1ton to 25tons, China various famous brand aviable.

Δ  Foldable boom lifting capacity from 1ton to 30tons, China various famous brand aviable.

###

Δ  Aerial Work Seat Aerial operation, work vision is wider.

Δ  Front & Rear Hydraulic Outriggers Double arms double cavity composite type hydraulic outriggers, more stable

CZPT Torque Limiter Products

Whether you’re looking for a magnetic torque limiter or a permanent-magnet synchronous limiter, CZPT(r) has a torque limiter solution for you. In addition to these products, we also offer Roller-detent and Challenge torque limiters.

Over-torque limiters

During heavy duty high cycle operations, it’s critical to have the proper equipment for maintaining torque levels. Having the right torque limiters can protect your machine from damage and help to reduce the frequency of downtime and cost of repair.
Torque limiters work to prevent the buildup of rotational energy, which can cause mechanical overloads. The torque limiter system detects the overload and disconnects the drive from the driven components. When the torque level drops below the preset level, the device reengages.
Torque limiters are widely used in industrial and assembly line applications. They are used in manufacturing equipment such as industrial robots and printing and converting machines. They are also used in conveyors and woodworking machines.
There are many types of torque limiters available. The most common are mechanical and hydraulic. The mechanical torque limiters can be installed in a single point or multiple points in the machine. Hydraulic torque limiters are a compact option for accurate torque overload release. They also allow users to set a precise disengagement torque value.
Typically, these devices are adjustable with a single screw. For offset mounted systems, an external bearing may be required. Most quality torque limiters include a bearing between the base of the clutch and the output flange.
Mechanical torque limiters are available in a variety of sizes and designs. They can be used in virtually any application. They provide an integrated mechanical and electrical design.

Magnetic torque limiters

Using Magnetic Torque Limiters will increase the reliability and durability of your equipment. They also help prevent catastrophic failure, which is essential for preventing downtime. They are used in a wide range of applications, including printing and converting machines, woodworking machines, conveyors, and many more.
They are designed to disengage from the driven system when the torque load exceeds the design limit. This protects rotating equipment and machinery from torsional strain and other hazards. They are also designed to provide precise overload protection. Using a torque limiter can protect equipment through its entire life cycle. It may prevent a mechanism from failing or even prevent a workplace accident.
A torque limiter is typically packaged as a shaft coupling. It is also available in other forms, such as friction-plate couplings and magnetic particle couplings. It is also available in many different sizes. It is important to choose a torque limiter that is right for your needs. The design of the torque limiter must match the type of torque load generated.
They are used in a variety of applications, including speed and torque sensors, acceleration sensors, position sensors, and more. They also can be found in various counters, tachogenerators, scales, and measuring devices.
Magnetic torque limiters are lightweight, require no maintenance, and don’t suffer wear and fatigue. They also can be used at any temperature. They have a quick response time, and they can reduce the transmission of torsional vibrations.

Permanent-magnet synchronous torque limiters

Various types of torque limiters are available in the market. These include friction torque limiters, magnetic particle clutch torque limiters, and spring-loaded pawl-spring torque limiters. These devices are used to limit the torque transmitted from an input shaft to an output shaft. These devices reduce the force experienced by the drive train components and thus enhance the reliability of electromechanical actuators. They protect expensive components from damage and physical injury.
In a magnetic particle clutch torque limiter, a magnetic field is generated from current. This field is transmitted to an output shaft through a physical barrier or air gap between the magnetic field lines. Magnetic particles in the assembly lock into chains along the field lines. The torque generated is statically or dynamically set. The torque is proportional to the current passing through the windings.
Friction torque limiters are used in various applications such as robotics. These devices have a radial and axial design. They also utilize sensors to prevent overload. These devices are also used as shaft-to-shaft couplings. The torque density is good and the devices are easy to operate.
Permanent-magnet synchronous torque limiters are another type of torque limiters. This type uses twin discs with mated magnets on their faces. These devices are fast acting and provide quick response. They can also have backlash.
In a permanent-magnet synchronous torque limiter, the magnetic field is generated from an excitation source. This field then interacts with a PM field to generate torque.

Roller-detent torque limiters

Whether you’re working on a manufacturing or processing line, it’s important to be aware of the various types of torque limiters and how they work. They can protect your equipment from overload and damage, and prevent physical injury to personnel. These devices can also be used in industrial robots, assembly lines, printing and converting machines, and conveyors.
Torque limiters can be mechanical, pneumatic, or electronic. Some systems have a single-position device, while others have a flexible coupling model that allows small parallel offsets and angular misalignments. Some systems also offer random reset devices.
Torque limiters are designed to protect expensive components from overloaded conditions. Modern machines have a predictable motion and torque, but unexpected forces can exceed their design limits. They can also eliminate physical injury by isolating driving and driven equipment from each other when overload occurs.
Mechanical torque limiters are available in a wide range of sizes and are designed for use in virtually any application. They are also backlash-free and offer superior repeat accuracy. They are ideal for processing different materials, and are suitable for applications such as woodworking.
Electronic torque limiters are less expensive than mechanical devices, and offer a more reliable control mechanism. They can apply pressure to thrust flanges and control the volume of air in the air chamber. They are commonly used in sheet metal processing equipment, printing and converting machines, and industrial robots.

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring is a custom-designed component that is used to transfer torque and axial force between mating components. The component can be used as a slip clutch and as a force limiter.
The tolerance ring may be made from metal, such as nickel-copper, spring steel, carbon steel, or copper-beryllium. The material may be heat-treated to provide the desired hardness and durability. The tolerance ring is typically curved to facilitate assembly. The tolerance ring can also be manufactured as an annular band.
The tolerance ring includes a generally cylindrical body. The body may be formed with a slit down the side. The body may also be constructed with one or more rows of projections. A tolerance ring is typically located between the inner component and the outer component. The tolerance ring transfers torque between the inner and outer components.
A tolerance ring may have an apex radius of no less than 1.01 RB. The base radius is measured perpendicularly from the ring’s central axis to the outer surface of the apex.
A tolerance ring may be arranged in a centered or piloted configuration. A centered configuration requires grooves in the bearing housing. A piloted configuration uses a step instead of a groove.
In a two-layer tolerance ring configuration, the first layer may include a plurality of radially extending projections. The second layer may include a smooth, regular surface. The two layers may overlap in some locations. When the layers overlap, the second layer may act as a sleeve around the inner component. The second layer may also act as a diffuser for transmitted force.

Challenge torque limiters

Designed to optimize torque and speed in drive systems, the Challenge torque limiter is available in torque ranges of three to 1090 Nm. Using an array of spring loaded friction discs, Challenge torque limiters are capable of adjusting force to the tune of a small percentage of the total torque. Whether you need a pilot bored unit or a completely custom machined model, Challenge has the expertise and resources to ensure your requirements are met.
In fact, the company has the largest line of torque limiters in the world. These units are capable of supporting shaft diameters ranging from 9mm to 64mm. They are also able to provide reliable overload protection. Having a torque limiter mounted in your machine is the smartest decision you can make.
The company also offers a range of torque limiters that are specifically engineered to address the needs of industry sectors such as automotive, aerospace, and medical. Aside from torque limiters, the company also offers other product solutions such as servo motors, actuators and cylinders, and power transmission systems. The patented R+W torque limiter has a proprietary patented operational principle that can be adjusted to match the application and meet its intended use. They are also available in a variety of torque ranges, sizes, and capacities. They also offer a comprehensive warranty and service program. They have a plethora of applications in industrial robots, conveyor systems, assembly lines, and even printing and converting equipment.

editor by czh 2022-12-02

Product Description

Quick Details

 

Applicable Industries: Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Construction works , Energy & Mining, Other	Customized support: OEM, ODM
Type: timing belt pulley	Surface treatment: Zinc plated
Place of Origin:ZheJiang , China	Brand Name:REACHJY
Application:transmission
Certification:ISO9001

US $1.5-15 / pcs |

100 pcs (Min. Order)

###

Certification:	ISO9001
Pulley Sizes:	C45 Steel
Manufacturing Process:	Machine
Material:	Alloy
Surface Treatment:	Zinc Plated
Application:	Chemical Industry, Grain Transport, Mining Transport, Power Plant

###

Samples:	US$ 50/pcs 1 pcs(Min.Order) | Request Sample

###

Customization:	Available | Customized Request

###

Applicable Industries: Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Construction works , Energy & Mining, Other	Customized support: OEM, ODM
Type: timing belt pulley	Surface treatment: Zinc plated
Place of Origin:Sichuan, China	Brand Name:REACHJY
Application:transmission
Certification:ISO9001

US $1.5-15 / pcs |

100 pcs (Min. Order)

###

Certification:	ISO9001
Pulley Sizes:	C45 Steel
Manufacturing Process:	Machine
Material:	Alloy
Surface Treatment:	Zinc Plated
Application:	Chemical Industry, Grain Transport, Mining Transport, Power Plant

###

Samples:	US$ 50/pcs 1 pcs(Min.Order) | Request Sample

###

Customization:	Available | Customized Request

###

Applicable Industries: Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Construction works , Energy & Mining, Other	Customized support: OEM, ODM
Type: timing belt pulley	Surface treatment: Zinc plated
Place of Origin:Sichuan, China	Brand Name:REACHJY
Application:transmission
Certification:ISO9001

What Is a Torque Limiter?

Whether you’re looking to add an extra bit of torque to your tool, or simply to keep the torque from getting out of hand, a limiter is a good tool to have on hand. There are a number of different limiters to choose from, including Ball detent limiters, Synchronous magnetic limiters, and Friction torque limiters.

Ball detent limiter

Typically, ball detent torque limiters use balls or rollers in sockets to control torque and force transmission through the load path. They are suitable for applications that require high precision and a fast response. They also minimize the possibility of damage caused by high-inertia loads. These torque limiters are often used on servo-driven axes. They are also suitable for packaging and woodworking.
A torque-limiting assembly consists of a gear, a cage, a series of balls, a spring, and breakout means. A cage is mounted between the input gear and a fixed backing plate. The cage rotates through half of the input gear’s axial angle. The cage holds the primary balls. When torque overload occurs, the primary balls roll out of their pockets and force the drive and driven elements to separate.
The cage also increases the frictional resistance to relative rotation. During normal torque loading, the primary balls continue to roll on the flat driving surface of the input gear. The cage displaces the input gear against the bias of the spring. This action maintains the assembly in this arrangement. The cage then rotates through the other half of the input gear’s axial angle. When the primary balls roll out of their pockets, the cage is forced axially toward the fixed backing plate.
The cage also has a secondary ball stop, which limits the travel of the secondary balls. Secondary balls are seated in terminal positions on the input gear. These balls roll out of secondary ball pockets 68 and 70. They may also be positioned in terminal positions. The secondary balls travel over ramps 69 and 72. They are sized to maintain a axial separation distance between the driving surface and the detent surface.
The primary balls are seated in the primary ball pockets 40 and 50 in the driving surface of the input gear. The cap projects into the primary ball pockets 50 in the detent surface 48. A plurality of secondary balls are seated in secondary ball pockets 68 and 70 in the driven surface of the cage. This action prevents the input gear from being displaced by the spring 20.

Friction torque limiter

Essentially a shaft-to-shaft coupling, a friction torque limiter combines economy and simplicity. The unit is designed to protect against excessive torque and also prevent damage from overloads. Typically used in conjunction with other drive components, a torque limiter is easy to install and replace, providing simple, cost-effective protection.
Torque limiters are available in many formats, including basic shear pins, ball detent units, and pneumatic controls. Each type of torque limiter must be designed for a specific application. Some systems offer a single position device, while others allow the operator to adjust settings to prevent overloads.
Torque limiters are commonly used in a wide variety of applications, including conveyors, sewage treatment plants, and power stations. These devices provide simple, cost-effective overload protection, and can be used in both directions of torque transmission.
Friction torque limiters are ideal for applications that operate under dusty conditions. They are also more predictable than shear pins, and can be adjusted to a variety of torque levels. The H-diameter calibration system on a GEC model, for example, makes it easier to determine the best torque setting for a given application.
Torque limiters can be coupled to any combination of rotating bodies, including shafts, pulleys, gears, and motors. They can be adjusted with an adjustable nut, and a variety of spring sets can be fitted to provide different torque ranges.
Torque limiters may also be equipped with a limit switch, which permits control of the motor drive system. If a torque overload occurs, the limit switch will signal the control system to shut the motor off.
Torque limiters are usually made from durable heat-treated steel. Some models come with bronze bushings for additional protection, and some offer a random reset device. To determine which torque limiter is right for your application, consult a factory. Regardless of the type of torque limiter you choose, it should have the right torque range and the right bore size.
In addition to preventing overloads, friction torque limiters can also help prevent damage to drive components, especially when they are used in conjunction with gears, sprockets, and pulleys. They are also simple to install and replace, providing simple, cost-effective, and user-friendly protection.

Reset style of limiter

Depending on the application, there are several styles of torque limiters. It is a good idea to consult a manufacturer in your area for the specifics. You’ll also want to make sure your new tool is the most effective fit for your application. A good rule of thumb is to match the output of your machine to the inputs of your torque limiter.
A good torque limiter should offer the following: a minimum of lost motion, a low frictional drag, and a low operating temperature. Some manufacturers offer a host of options, including a variety of materials and sizes. It is also worthwhile to select a torque limiter based on its mounting surface. Ideally, you want it to sit as close to the output of the machine as possible.
The best torque limiters are not only clever, they also offer a high degree of safety and reliability. They come in several varieties, from a simple pawl and spring configuration to hydraulic pressure and pneumatic pressure to complex synchronous magnetic and synchronous magnetic coupled units. Choosing the right one for your application can make a world of difference, especially if you want to make sure your equipment runs smoothly and efficiently.
One notable exception is a hydraulic torque limiter, which is seldom used for a simple reason: they’re too expensive. They are a bit complicated, and tend to occupy much more space than their petrochemical cousins. They also tend to require a lot of maintenance, especially if you’re dealing with a corrosive environment. The biggest disadvantage is that they often do not work well in high-stress environments. Fortunately, there are more cost-effective solutions to this problem. You should also know that a torque limiter is a safety device, so you should make sure to use one. This type of equipment is also useful in correcting misalignment and parallelism errors, so you’ll want to be sure you’re putting it to good use.
A torque limiter is a safety device that must decouple from the driven device when overload is detected. They are a worthwhile investment, and can be a useful tool in correcting misalignment and parallelism mistakes, ensuring your machine runs smoothly and safely.

Synchronous magnetic torque limiter

Basically, a torque limiter is a device that is used to limit the torque of the system. It protects the mechanical system of the machine from overload and damage. These devices are usually integrated into the drive train of a table-based machine or hand tool. In some cases, they may be reset automatically, while others need to be reset manually.
There are two kinds of torque limiters: the mechanical and the disconnect. In the mechanical type, a spring or a pawl is used to limit the torque. In the disconnect type, a mechanical component is sacrificed to allow the torque limiter to disconnect the drive. The disconnect type may be reset manually, while some may need to be reset automatically.
The synchronous magnetic torque limiter is a type of limiter that uses two magnets on each shaft of the machine. This type of limiter has some advantages over mechanical types, but there are also disadvantages. For example, it may have more backlash than the mechanical types. It may also transmit torque through a physical barrier. These disadvantages are sometimes offset by the fact that the synchronous magnetic torque limiter is able to work quickly and smoothly.
The torque limiter is usually the last gearset installed in a transmission assembly. It protects mechanical systems from overload and prevents the engine from burning out. Some types of torque limiters may require adjustment, but most of them do not. A torque limiter can be found in many cordless drills. Often, the torque limiter is positioned inside the planetary gearset.
The variable magnetic gearbox is another type of torque limiter. This type is a rotational device that uses a variable ratio magnetic gear. The variable magnetic gearbox uses about 25% of the input power and has lower maintenance requirements. It also has a lower output torque. It can be used to effectively limit the torque of a system.
A magnetic particle clutch can also be used as a torque limiter. This type of limiter is similar to the friction plate clutch. It can be integrated into a cylinder head. This type of clutch can be dynamically set or statically set.

editor by czh 2022-11-27

Product Description

Innovative designs of torque limiters from the JJ transmission reliably protect machines and systems from expensive overload damage. 

Torque limiters suit sprockets, gears, sheaves, and flange plates as the center part mounts between 2 friction sides. 

This crucial device protects the driveline against impermissibly high torque surges which can occur due to unforeseen blockages.

ITEM NO.		TORGUE	PLAIN BORE	MAX. BORE	BUSH LENGTH	BUSH DIA		BORE OF CENTER		D	DH	L	E	T	t	S	A	C	ADJUST. NUT	ADJUST. BOLT	SET SCREW	WEIGHT
		kgf-m	mm	mm	mm		mm		mm	mm	mm	mm	mm	mm	mm	mm	mm	mm				kg
TL200-1		0.3-1	7.0	14.0	3.8	30	-0.571	30	.+0.03	50.0	24.0	29.0	6.5	2.6	2.5	7.0		38.0	M24 P1.0			0.2
TL200-2		0.7-2					-0.049		0
TL250-1		0.7-2.8	10.0	22.0	4.5	41	-0.571	41	.+0.05	65.0	35.0	48.0	16.0	4.5	3.2	9.0	4.0	50.0	M35 P1.5		M5	0.5
TL250-2		1.4-5.5					-0.045		0
TL350-1		2.0-7.6	17.0	25.0	6.5	49	-0.571	49	.+0.05	89.0	42.0	62.0	19.0	4.5	3.2	16.0	6.0	63.0	M42 P1.5		M6	1.2
TL350-2		3.5-15.2					-0.065		0
TL500-1		4.8-21.4	20.0	42.0	6.5	74	-0.050	74	.+0.05	127.0	65.0	76.0	22.0	5.7	3.2	16.0	7.0		M65 P1.5	M8 P1.0 3 PCS	M8	3.0
TL500-2		9.0-42.9					-0.100		0
TL700-1		11.8-58.1	30.0	64.0	9.5	105	-0.075	105	.+0.05	178.0	95.0	98.0	24.0	7.7	3.2	29.0	8.0		M95 P1.5	M10 P1.5 3 PCS	M10	6.7
TL700-2		22.8-110.6					-0.125		0
TL100-16		40-130	30.0	72.0	12.5	135	-0.085	135	.+0.07	254.0	100.0	115.0	23.0	15.0	4.0	24.0		19.0		M18 P1.5 3 PCS		21.0
TL100-24		60-190					-0.125		-0.125
TL140-10		90-272	40.0	100.0	15.5 19.5 23.5	183	-0.070	183	.+0.07	356.0	145.0	150.0	31.0	13.0	4.0	29.0		27.0		M26 P1.5 3 PCS		52.0
TL140-15		200-400					-0.120		0
TL240-6		250-500	50.0	130.0	15.5 19.5 23.5	226	-0.070	226	.+0.07	508.0	185.0	175.0	36.0	15.0	4.0	31.0		36.0		M32 P1.5 3 PCS		117.0
TL240-12		470-950					-0.120		0

US $8-200 / Pcs |

50 Pcs (Min. Order)

###

Standard or Nonstandard:	Standard
Feature:	Oil-Resistant, Cold-Resistant, Heat-Resistant, Wear-Resistant
Application:	Textile Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Mining Equipment
Surface Treatment:	Polishing, Electroplating
Material:	Alloy/Carbon Steel
Transport Package:	Crate/Container

###

Samples:	US$ 100/Pcs 1 Pcs(Min.Order) | Request Sample

###

Customization:	Available | Customized Request

###

ITEM NO.		TORGUE	PLAIN BORE	MAX. BORE	BUSH LENGTH	BUSH DIA		BORE OF CENTER		D	DH	L	E	T	t	S	A	C	ADJUST. NUT	ADJUST. BOLT	SET SCREW	WEIGHT
		kgf-m	mm	mm	mm		mm		mm	mm	mm	mm	mm	mm	mm	mm	mm	mm				kg
TL200-1		0.3-1	7.0	14.0	3.8	30	-0.024	30	.+0.03	50.0	24.0	29.0	6.5	2.6	2.5	7.0		38.0	M24 P1.0			0.2
TL200-2		0.7-2					-0.049		0
TL250-1		0.7-2.8	10.0	22.0	4.5	41	-0.010	41	.+0.05	65.0	35.0	48.0	16.0	4.5	3.2	9.0	4.0	50.0	M35 P1.5		M5	0.5
TL250-2		1.4-5.5					-0.045		0
TL350-1		2.0-7.6	17.0	25.0	6.5	49	-0.025	49	.+0.05	89.0	42.0	62.0	19.0	4.5	3.2	16.0	6.0	63.0	M42 P1.5		M6	1.2
TL350-2		3.5-15.2					-0.065		0
TL500-1		4.8-21.4	20.0	42.0	6.5	74	-0.050	74	.+0.05	127.0	65.0	76.0	22.0	5.7	3.2	16.0	7.0		M65 P1.5	M8 P1.0 3 PCS	M8	3.0
TL500-2		9.0-42.9					-0.100		0
TL700-1		11.8-58.1	30.0	64.0	9.5	105	-0.075	105	.+0.05	178.0	95.0	98.0	24.0	7.7	3.2	29.0	8.0		M95 P1.5	M10 P1.5 3 PCS	M10	6.7
TL700-2		22.8-110.6					-0.125		0
TL100-16		40-130	30.0	72.0	12.5	135	-0.085	135	.+0.07	254.0	100.0	115.0	23.0	15.0	4.0	24.0		19.0		M18 P1.5 3 PCS		21.0
TL100-24		60-190					-0.125		-0.125
TL140-10		90-272	40.0	100.0	15.5 19.5 23.5	183	-0.070	183	.+0.07	356.0	145.0	150.0	31.0	13.0	4.0	29.0		27.0		M26 P1.5 3 PCS		52.0
TL140-15		200-400					-0.120		0
TL240-6		250-500	50.0	130.0	15.5 19.5 23.5	226	-0.070	226	.+0.07	508.0	185.0	175.0	36.0	15.0	4.0	31.0		36.0		M32 P1.5 3 PCS		117.0
TL240-12		470-950					-0.120		0

US $8-200 / Pcs |

50 Pcs (Min. Order)

###

Standard or Nonstandard:	Standard
Feature:	Oil-Resistant, Cold-Resistant, Heat-Resistant, Wear-Resistant
Application:	Textile Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Mining Equipment
Surface Treatment:	Polishing, Electroplating
Material:	Alloy/Carbon Steel
Transport Package:	Crate/Container

###

Samples:	US$ 100/Pcs 1 Pcs(Min.Order) | Request Sample

###

Customization:	Available | Customized Request

###

ITEM NO.		TORGUE	PLAIN BORE	MAX. BORE	BUSH LENGTH	BUSH DIA		BORE OF CENTER		D	DH	L	E	T	t	S	A	C	ADJUST. NUT	ADJUST. BOLT	SET SCREW	WEIGHT
		kgf-m	mm	mm	mm		mm		mm	mm	mm	mm	mm	mm	mm	mm	mm	mm				kg
TL200-1		0.3-1	7.0	14.0	3.8	30	-0.024	30	.+0.03	50.0	24.0	29.0	6.5	2.6	2.5	7.0		38.0	M24 P1.0			0.2
TL200-2		0.7-2					-0.049		0
TL250-1		0.7-2.8	10.0	22.0	4.5	41	-0.010	41	.+0.05	65.0	35.0	48.0	16.0	4.5	3.2	9.0	4.0	50.0	M35 P1.5		M5	0.5
TL250-2		1.4-5.5					-0.045		0
TL350-1		2.0-7.6	17.0	25.0	6.5	49	-0.025	49	.+0.05	89.0	42.0	62.0	19.0	4.5	3.2	16.0	6.0	63.0	M42 P1.5		M6	1.2
TL350-2		3.5-15.2					-0.065		0
TL500-1		4.8-21.4	20.0	42.0	6.5	74	-0.050	74	.+0.05	127.0	65.0	76.0	22.0	5.7	3.2	16.0	7.0		M65 P1.5	M8 P1.0 3 PCS	M8	3.0
TL500-2		9.0-42.9					-0.100		0
TL700-1		11.8-58.1	30.0	64.0	9.5	105	-0.075	105	.+0.05	178.0	95.0	98.0	24.0	7.7	3.2	29.0	8.0		M95 P1.5	M10 P1.5 3 PCS	M10	6.7
TL700-2		22.8-110.6					-0.125		0
TL100-16		40-130	30.0	72.0	12.5	135	-0.085	135	.+0.07	254.0	100.0	115.0	23.0	15.0	4.0	24.0		19.0		M18 P1.5 3 PCS		21.0
TL100-24		60-190					-0.125		-0.125
TL140-10		90-272	40.0	100.0	15.5 19.5 23.5	183	-0.070	183	.+0.07	356.0	145.0	150.0	31.0	13.0	4.0	29.0		27.0		M26 P1.5 3 PCS		52.0
TL140-15		200-400					-0.120		0
TL240-6		250-500	50.0	130.0	15.5 19.5 23.5	226	-0.070	226	.+0.07	508.0	185.0	175.0	36.0	15.0	4.0	31.0		36.0		M32 P1.5 3 PCS		117.0
TL240-12		470-950					-0.120		0

CZPT(R) Tolerance Ring For Limiter Torque

Using a limiter torque ring to limit the torque of the motor is an excellent method to maintain the smoothness and efficiency of the engine. It can also help to eliminate wear and tear on the engine due to over-revving or under-revving of the engine.

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring is designed to limit limiter torque by providing interference fit between an inner component and an outer component. The tolerance ring is installed between a stator or compressor housing and an inner component, for example, a shaft receivable in a bore in the housing. The tolerance ring is formed of a resilient material such as spring steel.
The tolerance ring may have an outer and an inner circumference. The outer circumference may be smaller than the inner circumference and may be less than 16 mm in diameter. The tolerance ring may be formed from a sheet material. The thickness of the sheet may be less than 0.2 mm.
The tolerance ring may also include a sidewall. The sidewall includes an undeformed portion. The sidewall may be curved to form an annular ring. The tolerance ring may include one or more rows of wave structures. The wave structures may vary in shape and size, and may be located peripherally or radially around the tolerance ring.
The number of wave structures may vary, from less than 10 to more than 35. The number of wave structures may be located at the peripheral, radial, and end regions of the tolerance ring. The wave structures may be identical in size and shape, or may have different physical characteristics. The amount of torque transmitted by the tolerance ring is dependent on the stiffness of the projections. The tolerance ring can act as a force limiter or torque transmitter.
The tolerance ring may be a single-layer ring, or a two-layer ring. The first layer may be a strip or sleeve of resilient material. The second layer may be a smooth, regular surface. The first layer may be radially extending projections, a set of axially spaced protuberances, or a plurality of rounded ridges rising to a radial peak.

CZPT TL

TL series torque converters are a good fit for a variety of applications. These products deliver a slew of benefits including a long service life and a reduced component count. They are available in several configurations including semi-open and enclosed models. They also feature air control to ensure smooth device function. The TL series is also available in multiple torque capacities ranging from a low of 1,500 lb. @ 80 psi to a high of 27,700 lb. @ 80 psi.
The TL series is equipped with several technological feats including a proximity sensor that sends a signal to a torque limiter control valve. This unit also features a single and double air pressure circuit to ensure smooth remote torque adjustment. It also features an o-ring to ensure zero air leakage.
The TL-A Series is available in sixteen models, including two with an impressive 27700 lb. @ 80 psi torque. It’s also worth noting that they can be installed in a variety of applications, including conveyors, sheet metal processing equipment, printing and converting machines and industrial robots. They are also easy to install and remove, making them a great choice for maintenance departments.
The TL-A Series also offers a number of high-end features such as a reversible shaft design and internal springs to ensure complete disengagement. They also include a hard-chrome detent interface that decreases drive-ring wear. The TL-A Series also features a single-flex coupling that delivers high shaft misalignment protection and a double-flex coupling that delivers high torsional rigidity.
TL Series torque converters are a good fit for applications that require torque in the sub-tens of thousands of pounds per square inch. They are also a good choice for industrial automation applications and can be installed in a wide variety of industries, including manufacturing, aerospace and automotive.

IWIS FT series

FT IWIS’s FT-1000 Series aka FT IWIS’s FT t1000 series aka the FT t1000 series aka the TFT-1000 series aka the FT t1000 aka the FT t1000 FT t1000 series aka the FFT1000 series aka the FFT1000 FT t1000 aka the FFT1000 series aka FT t1000 FT t1000 FT t1000?. The FT t1000 series aka the, FT t1000 series aka the, FFT t1000 series aka the, FFT t1000 series aka FT t1000 series aka the, etc.. FT t1000 series aka the,, FFT t1000 series aka FFT t1000 series aka the FFT t1000 series aka the,.. FFT t1000 series aka the,, FT t1000 series aka FFT, FT t1000 series aka FT, FT t1000 series TA t1000 series aka the FFT, FT t1000 series, FT t1000 series aka, FFT t1000 series aka, FFT, FT t1000 series, etc.

TL-IT inline

TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.

editor by czh 2022-11-26

Product Description

Product Description

Product Application
Spider Crane are suitable for cargo handling in the transportation industry, material movement in the construction industry, and heavy equipment assembly in the manufacturing industry. It is especially effective for operation in narrow spaces. It can be used in installing glass curtain wall, petrochemical pipes, railway construction, machine inspection and maintenance in workshop, electric power construction or municipal construction.
Product Features
1. 380V power supply can achieve no noise, environmental protection and quiet.
2. Easy to transport forklift, crane with plug position.
3. Interlock system: after the boom is reset, the outriggers can be operated and travel to protect the safety of the crane.
4. U-shape boom: reasonable structure, 1 welding seam, large contact area between booms, high strength and long life.
5. Outrigger by remote control: can be controlled at close range to avoid accidents when the outriggers cannot be seen during operations in complex environments.
6. Moment limiter: accurately display the weight of the object to be hoisted. When hoisting, make sure to have a “number” in mind to protect the safety of the boom.
7. Proportional remote control, proportional solenoid valve:can control the hoist from a long distance and can make the hoisted weight move gradually. It is especially suitable for mechanical installation and used in places with high position accuracy requirements.
8. One-key leveling of outriggers: can be operated individually according to the surrounding environment, or the computer can be used to control 4 outriggers at the same time to achieve one-key leveling, so that the car body is always in a horizontal state.
 

Product Parameters

EW3.0 Spider Crane Technical Parameter
Model: EW3.0 Spider Crane		Specification: 3t×1.3m
Maximum lifting torque: 53kN·m		Maximum ground lifting height: 9.7m
Lifting speed of hook: 5.5m/min (4 times)		Wire rope specifications: φ8×55
Boom form: five-section boom		Maximum Boom length: 9m
Luffing angle: 0-75°		Rotation angle: 360°full rotation
Outrigger form:First stage:automatic;second stage:manually adjusted		Maximum extension distance:(Front)3170×(Horizontal)3600×(Back)4050
Walking mode:Hydraulic motor drives the reducer to travel		Walking speed: 0-2.5km/h
Walking device: crawler synthetic rubber		Climbing ability: 33%
Working pressure: 18MPa		Hydraulic oil tank volume:38L
Overall size: 2940×950×1600 (mm)		Machine weight: 2300kg

EW5.0 Spider Crane Technical Parameter
Model: EW5.0 Spider Crane		Specification: 5t×1.8m
Maximum operating radius: 16m		Maximum ground lifting height: 16.9m
Lifting speed of hook:10m/min (4 times)		Wire rope diameter and length: Φ10mm×80m
Boom form: five-section boom		Boom length: 16.6m
Boom angle: 0-80°		Rotation angle: 360°continuous rotation
Maximum extension distance: (front) 5170* (horizontal) 5807* (rear) 5423mm		Outrigger form: frog style
Walking mode:hydraulic walking		Walking speed: 0-3km/h
Walking device: crawler synthetic rubber		Climbing ability: 32%
Ground pressure: 41.3kPa		Hydraulic oil tank volume:38L
Overall size: 5000×1370×1980 (mm)		Machine weight: 5500kg

EW8.0 Spider Crane Technical Parameter
Model: EW8.0 Spider Crane		Specification: 8t×2.5m
Maximum operating radius: 15.7m		Maximum ground lifting height: 17.8m
Lifting speed of hook:10m/min (4 ropes)		Wire rope diameter and length: Φ12mm×120m
Boom form: Five-section boom		Boom length: 4.65m-16.4m
Boom angle/time: 0-80°/24.5sec		Rotation angle: 0-360°continuous rotation
Outrigger form: Manually adjustment for 1 section. Automatic for the 2,3 section		Maximum extension amplitude: (front) 5510* (horizontal) 5670* (rear) 5030mm
Walking mode:Hydraulic motor		Walking speed: 0-1.5km/h
Staring Method:electrical starting		Climbing ability: 20°
Ground Pressure:49kPa		Ground Length×Width:1720×320mm
Overall size: 5033×1560×2278 (mm)		Machine weight: 6500kg

EW12.0 Spider Crane Technical Parameter
Model: EW12.0 Spider Crane		Specification: 12t
Maximum operating radius: 19.8m		Maximum ground lifting height: 21m
Lifting speed of hook:11m/min (4 times)		Wire rope diameter and length: Φ14mm×80m
Boom form: six-section boom		Boom length: 5.7m-19.8m
Boom angle/time: 0-78°/13sec		Rotation angle/speed: 0-360°continuous rotation/38sec
Outrigger form: Manually unscrew + hydraulic expansion + automatic support (two sections)		Maximum extension amplitude: Left and right (7400mm) before and after (8190mm)
Walking mode:Hydraulic motor drive		Walking speed: 0-2.5km/h
Staring Method:electrical starting		Climbing ability: 20°(36%)
Startup performance: -5°C-40°C		Eternalwin size:3200×400mm
Overall size: 5700×1800×2400 (mm)		Machine weight: 11500kg

 

Company Profile

 

FAQ

1. What after-sale service do you provide?
We have professional sales team and technical team for all customer. We can serve 24 hours a day for you.

2. What payment methods do you support?
We have many kinds of payment for your reference ,such as Western Union, Paypal, L/C, T/T and so on.

3. How to delivery the goods?

We often shipment goods by sea,which is cheaper than by air. It depends on your specific requirement.

4. What is your warranty service about machine?

Our machine has 1 year warranty time, and our engineering team available for oversea service with crane installation, inspection and commissioning.

5. What is your trade terms?

We have EXW, FOB, CIF, CFR for you to choose, and we can change according to your requirements.

6.Why should I choose your products?

We can provide high quality and low price products for you.

 

US $15,000-35,000 / Piece |

1 Piece (Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated

###

After-sales Service:	Support
Max. Lifting Height:	21m
Rated Loading Capacity:	12t

###

Customization:	Available | Customized Request

###

EW3.0 Spider Crane Technical Parameter
Model: EW3.0 Spider Crane		Specification: 3t×1.3m
Maximum lifting torque: 53kN·m		Maximum ground lifting height: 9.7m
Lifting speed of hook: 5.5m/min (4 times)		Wire rope specifications: φ8×55
Boom form: five-section boom		Maximum Boom length: 9m
Luffing angle: 0-75°		Rotation angle: 360°full rotation
Outrigger form:First stage:automatic;second stage:manually adjusted		Maximum extension distance:(Front)3170×(Horizontal)3600×(Back)4050
Walking mode:Hydraulic motor drives the reducer to travel		Walking speed: 0-2.5km/h
Walking device: crawler synthetic rubber		Climbing ability: 33%
Working pressure: 18MPa		Hydraulic oil tank volume:38L
Overall size: 2940×950×1600 (mm)		Machine weight: 2300kg

###

EW5.0 Spider Crane Technical Parameter
Model: EW5.0 Spider Crane		Specification: 5t×1.8m
Maximum operating radius: 16m		Maximum ground lifting height: 16.9m
Lifting speed of hook:10m/min (4 times)		Wire rope diameter and length: Φ10mm×80m
Boom form: five-section boom		Boom length: 16.6m
Boom angle: 0-80°		Rotation angle: 360°continuous rotation
Maximum extension distance: (front) 5170* (horizontal) 5807* (rear) 5423mm		Outrigger form: frog style
Walking mode:hydraulic walking		Walking speed: 0-3km/h
Walking device: crawler synthetic rubber		Climbing ability: 32%
Ground pressure: 41.3kPa		Hydraulic oil tank volume:38L
Overall size: 5000×1370×1980 (mm)		Machine weight: 5500kg

###

EW8.0 Spider Crane Technical Parameter
Model: EW8.0 Spider Crane		Specification: 8t×2.5m
Maximum operating radius: 15.7m		Maximum ground lifting height: 17.8m
Lifting speed of hook:10m/min (4 ropes)		Wire rope diameter and length: Φ12mm×120m
Boom form: Five-section boom		Boom length: 4.65m-16.4m
Boom angle/time: 0-80°/24.5sec		Rotation angle: 0-360°continuous rotation
Outrigger form: Manually adjustment for 1 section. Automatic for the 2,3 section		Maximum extension amplitude: (front) 5510* (horizontal) 5670* (rear) 5030mm
Walking mode:Hydraulic motor		Walking speed: 0-1.5km/h
Staring Method:electrical starting		Climbing ability: 20°
Ground Pressure:49kPa		Ground Length×Width:1720×320mm
Overall size: 5033×1560×2278 (mm)		Machine weight: 6500kg

###

EW12.0 Spider Crane Technical Parameter
Model: EW12.0 Spider Crane		Specification: 12t
Maximum operating radius: 19.8m		Maximum ground lifting height: 21m
Lifting speed of hook:11m/min (4 times)		Wire rope diameter and length: Φ14mm×80m
Boom form: six-section boom		Boom length: 5.7m-19.8m
Boom angle/time: 0-78°/13sec		Rotation angle/speed: 0-360°continuous rotation/38sec
Outrigger form: Manually unscrew + hydraulic expansion + automatic support (two sections)		Maximum extension amplitude: Left and right (7400mm) before and after (8190mm)
Walking mode:Hydraulic motor drive		Walking speed: 0-2.5km/h
Staring Method:electrical starting		Climbing ability: 20°(36%)
Startup performance: -5°C-40°C		Eternalwin size:3200×400mm
Overall size: 5700×1800×2400 (mm)		Machine weight: 11500kg

US $15,000-35,000 / Piece |

1 Piece (Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated

###

After-sales Service:	Support
Max. Lifting Height:	21m
Rated Loading Capacity:	12t

###

Customization:	Available | Customized Request

###

EW3.0 Spider Crane Technical Parameter
Model: EW3.0 Spider Crane		Specification: 3t×1.3m
Maximum lifting torque: 53kN·m		Maximum ground lifting height: 9.7m
Lifting speed of hook: 5.5m/min (4 times)		Wire rope specifications: φ8×55
Boom form: five-section boom		Maximum Boom length: 9m
Luffing angle: 0-75°		Rotation angle: 360°full rotation
Outrigger form:First stage:automatic;second stage:manually adjusted		Maximum extension distance:(Front)3170×(Horizontal)3600×(Back)4050
Walking mode:Hydraulic motor drives the reducer to travel		Walking speed: 0-2.5km/h
Walking device: crawler synthetic rubber		Climbing ability: 33%
Working pressure: 18MPa		Hydraulic oil tank volume:38L
Overall size: 2940×950×1600 (mm)		Machine weight: 2300kg

###

EW5.0 Spider Crane Technical Parameter
Model: EW5.0 Spider Crane		Specification: 5t×1.8m
Maximum operating radius: 16m		Maximum ground lifting height: 16.9m
Lifting speed of hook:10m/min (4 times)		Wire rope diameter and length: Φ10mm×80m
Boom form: five-section boom		Boom length: 16.6m
Boom angle: 0-80°		Rotation angle: 360°continuous rotation
Maximum extension distance: (front) 5170* (horizontal) 5807* (rear) 5423mm		Outrigger form: frog style
Walking mode:hydraulic walking		Walking speed: 0-3km/h
Walking device: crawler synthetic rubber		Climbing ability: 32%
Ground pressure: 41.3kPa		Hydraulic oil tank volume:38L
Overall size: 5000×1370×1980 (mm)		Machine weight: 5500kg

###

EW8.0 Spider Crane Technical Parameter
Model: EW8.0 Spider Crane		Specification: 8t×2.5m
Maximum operating radius: 15.7m		Maximum ground lifting height: 17.8m
Lifting speed of hook:10m/min (4 ropes)		Wire rope diameter and length: Φ12mm×120m
Boom form: Five-section boom		Boom length: 4.65m-16.4m
Boom angle/time: 0-80°/24.5sec		Rotation angle: 0-360°continuous rotation
Outrigger form: Manually adjustment for 1 section. Automatic for the 2,3 section		Maximum extension amplitude: (front) 5510* (horizontal) 5670* (rear) 5030mm
Walking mode:Hydraulic motor		Walking speed: 0-1.5km/h
Staring Method:electrical starting		Climbing ability: 20°
Ground Pressure:49kPa		Ground Length×Width:1720×320mm
Overall size: 5033×1560×2278 (mm)		Machine weight: 6500kg

###

EW12.0 Spider Crane Technical Parameter
Model: EW12.0 Spider Crane		Specification: 12t
Maximum operating radius: 19.8m		Maximum ground lifting height: 21m
Lifting speed of hook:11m/min (4 times)		Wire rope diameter and length: Φ14mm×80m
Boom form: six-section boom		Boom length: 5.7m-19.8m
Boom angle/time: 0-78°/13sec		Rotation angle/speed: 0-360°continuous rotation/38sec
Outrigger form: Manually unscrew + hydraulic expansion + automatic support (two sections)		Maximum extension amplitude: Left and right (7400mm) before and after (8190mm)
Walking mode:Hydraulic motor drive		Walking speed: 0-2.5km/h
Staring Method:electrical starting		Climbing ability: 20°(36%)
Startup performance: -5°C-40°C		Eternalwin size:3200×400mm
Overall size: 5700×1800×2400 (mm)		Machine weight: 11500kg

CZPT(R) Tolerance Ring For Limiter Torque

Using a limiter torque ring to limit the torque of the motor is an excellent method to maintain the smoothness and efficiency of the engine. It can also help to eliminate wear and tear on the engine due to over-revving or under-revving of the engine.

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring is designed to limit limiter torque by providing interference fit between an inner component and an outer component. The tolerance ring is installed between a stator or compressor housing and an inner component, for example, a shaft receivable in a bore in the housing. The tolerance ring is formed of a resilient material such as spring steel.
The tolerance ring may have an outer and an inner circumference. The outer circumference may be smaller than the inner circumference and may be less than 16 mm in diameter. The tolerance ring may be formed from a sheet material. The thickness of the sheet may be less than 0.2 mm.
The tolerance ring may also include a sidewall. The sidewall includes an undeformed portion. The sidewall may be curved to form an annular ring. The tolerance ring may include one or more rows of wave structures. The wave structures may vary in shape and size, and may be located peripherally or radially around the tolerance ring.
The number of wave structures may vary, from less than 10 to more than 35. The number of wave structures may be located at the peripheral, radial, and end regions of the tolerance ring. The wave structures may be identical in size and shape, or may have different physical characteristics. The amount of torque transmitted by the tolerance ring is dependent on the stiffness of the projections. The tolerance ring can act as a force limiter or torque transmitter.
The tolerance ring may be a single-layer ring, or a two-layer ring. The first layer may be a strip or sleeve of resilient material. The second layer may be a smooth, regular surface. The first layer may be radially extending projections, a set of axially spaced protuberances, or a plurality of rounded ridges rising to a radial peak.

CZPT TL

TL series torque converters are a good fit for a variety of applications. These products deliver a slew of benefits including a long service life and a reduced component count. They are available in several configurations including semi-open and enclosed models. They also feature air control to ensure smooth device function. The TL series is also available in multiple torque capacities ranging from a low of 1,500 lb. @ 80 psi to a high of 27,700 lb. @ 80 psi.
The TL series is equipped with several technological feats including a proximity sensor that sends a signal to a torque limiter control valve. This unit also features a single and double air pressure circuit to ensure smooth remote torque adjustment. It also features an o-ring to ensure zero air leakage.
The TL-A Series is available in sixteen models, including two with an impressive 27700 lb. @ 80 psi torque. It’s also worth noting that they can be installed in a variety of applications, including conveyors, sheet metal processing equipment, printing and converting machines and industrial robots. They are also easy to install and remove, making them a great choice for maintenance departments.
The TL-A Series also offers a number of high-end features such as a reversible shaft design and internal springs to ensure complete disengagement. They also include a hard-chrome detent interface that decreases drive-ring wear. The TL-A Series also features a single-flex coupling that delivers high shaft misalignment protection and a double-flex coupling that delivers high torsional rigidity.
TL Series torque converters are a good fit for applications that require torque in the sub-tens of thousands of pounds per square inch. They are also a good choice for industrial automation applications and can be installed in a wide variety of industries, including manufacturing, aerospace and automotive.

IWIS FT series

FT IWIS’s FT-1000 Series aka FT IWIS’s FT t1000 series aka the FT t1000 series aka the TFT-1000 series aka the FT t1000 aka the FT t1000 FT t1000 series aka the FFT1000 series aka the FFT1000 FT t1000 aka the FFT1000 series aka FT t1000 FT t1000 FT t1000?. The FT t1000 series aka the, FT t1000 series aka the, FFT t1000 series aka the, FFT t1000 series aka FT t1000 series aka the, etc.. FT t1000 series aka the,, FFT t1000 series aka FFT t1000 series aka the FFT t1000 series aka the,.. FFT t1000 series aka the,, FT t1000 series aka FFT, FT t1000 series aka FT, FT t1000 series TA t1000 series aka the FFT, FT t1000 series, FT t1000 series aka, FFT t1000 series aka, FFT, FT t1000 series, etc.

TL-IT inline

TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.

editor by czh 2022-11-24

Product Description

 Features;Ubet Machinery Torque Limitmer

In case of sudden loading,  over loading or power off in transmission system,  CZPT Torque Limiter will slide automatically to protect the equipment. When the loading come back to normal,  the device will automatically work again without adjusting or setting.  CZPT Torque limiter operates through the spring mounted upon the friction facing. The sliding torque can be preset by adjusting the nut or bolt.The torque limiter can be sued matching with the center parts clamped closely between tow friction faces,  such as sprockets, gears,pulleys or flanges.

Comparing with one-time safety pin system, CZPT Torque Limiter operates in line with appropriate spring loading and surface pressure to ensure the comparatively longer sliding time, recovering the presetting, and longer and continual protection as well.CZPT Torque Limiter is widely used in baking, bottling, food processing, machine tool, material handling, mining, packaging or printing industries. 

1.      precise overload protection
2.      easy manual adjustment
3.      factory torque setting available
4.      bored to fit for easy installation

 
Sizes and types:

Item No.	Inner Diameter	Outter Diameter	Torque Range (Nm)
UTL50-1	8-14	50	2.94-9.8
UTL50-2			6.86-19.6
UTL65-1	10-22	65	6.86~/8822 0571 .44
UTL65-2			13.72-53.9
UTL89-1	17-25	89	19.6-74.48
UTL89-2			34.3-148.96
UTL127-1	20-42	127	46.08-209.72
UTL127-2			88.2-420.42
UTL178-1	30-64	178	115.64-569.38
UTL178-2			223.4-1087.8
Type 1 refers to 1 disc spring assembled; Type 2 refers to 2 disc springs assembled.

US $3 / Piece |

5 Pieces (Min. Order)

###

Application:	Industry
Material:	Steel 1045, S45c, C45e
Single Nut Adjustment:	The Washer Protect The Nut From Loosen
3 Bolts to Adjust:	Adjusting Nut to Fix The Pilot Plate
Steel Parts:	Colorful Zinc Coating
Steel Pats:	Blackening

###

Customization:	Available | Customized Request

###

Item No.	Inner Diameter	Outter Diameter	Torque Range (Nm)
UTL50-1	8-14	50	2.94-9.8
UTL50-2			6.86-19.6
UTL65-1	10-22	65	6.86-27.44
UTL65-2			13.72-53.9
UTL89-1	17-25	89	19.6-74.48
UTL89-2			34.3-148.96
UTL127-1	20-42	127	46.08-209.72
UTL127-2			88.2-420.42
UTL178-1	30-64	178	115.64-569.38
UTL178-2			223.4-1087.8
Type 1 refers to one disc spring assembled; Type 2 refers to two disc springs assembled.

US $3 / Piece |

5 Pieces (Min. Order)

###

Application:	Industry
Material:	Steel 1045, S45c, C45e
Single Nut Adjustment:	The Washer Protect The Nut From Loosen
3 Bolts to Adjust:	Adjusting Nut to Fix The Pilot Plate
Steel Parts:	Colorful Zinc Coating
Steel Pats:	Blackening

###

Customization:	Available | Customized Request

###

Item No.	Inner Diameter	Outter Diameter	Torque Range (Nm)
UTL50-1	8-14	50	2.94-9.8
UTL50-2			6.86-19.6
UTL65-1	10-22	65	6.86-27.44
UTL65-2			13.72-53.9
UTL89-1	17-25	89	19.6-74.48
UTL89-2			34.3-148.96
UTL127-1	20-42	127	46.08-209.72
UTL127-2			88.2-420.42
UTL178-1	30-64	178	115.64-569.38
UTL178-2			223.4-1087.8
Type 1 refers to one disc spring assembled; Type 2 refers to two disc springs assembled.

CZPT(R) Tolerance Ring For Limiter Torque

Using a limiter torque ring to limit the torque of the motor is an excellent method to maintain the smoothness and efficiency of the engine. It can also help to eliminate wear and tear on the engine due to over-revving or under-revving of the engine.

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring is designed to limit limiter torque by providing interference fit between an inner component and an outer component. The tolerance ring is installed between a stator or compressor housing and an inner component, for example, a shaft receivable in a bore in the housing. The tolerance ring is formed of a resilient material such as spring steel.
The tolerance ring may have an outer and an inner circumference. The outer circumference may be smaller than the inner circumference and may be less than 16 mm in diameter. The tolerance ring may be formed from a sheet material. The thickness of the sheet may be less than 0.2 mm.
The tolerance ring may also include a sidewall. The sidewall includes an undeformed portion. The sidewall may be curved to form an annular ring. The tolerance ring may include one or more rows of wave structures. The wave structures may vary in shape and size, and may be located peripherally or radially around the tolerance ring.
The number of wave structures may vary, from less than 10 to more than 35. The number of wave structures may be located at the peripheral, radial, and end regions of the tolerance ring. The wave structures may be identical in size and shape, or may have different physical characteristics. The amount of torque transmitted by the tolerance ring is dependent on the stiffness of the projections. The tolerance ring can act as a force limiter or torque transmitter.
The tolerance ring may be a single-layer ring, or a two-layer ring. The first layer may be a strip or sleeve of resilient material. The second layer may be a smooth, regular surface. The first layer may be radially extending projections, a set of axially spaced protuberances, or a plurality of rounded ridges rising to a radial peak.

CZPT TL

TL series torque converters are a good fit for a variety of applications. These products deliver a slew of benefits including a long service life and a reduced component count. They are available in several configurations including semi-open and enclosed models. They also feature air control to ensure smooth device function. The TL series is also available in multiple torque capacities ranging from a low of 1,500 lb. @ 80 psi to a high of 27,700 lb. @ 80 psi.
The TL series is equipped with several technological feats including a proximity sensor that sends a signal to a torque limiter control valve. This unit also features a single and double air pressure circuit to ensure smooth remote torque adjustment. It also features an o-ring to ensure zero air leakage.
The TL-A Series is available in sixteen models, including two with an impressive 27700 lb. @ 80 psi torque. It’s also worth noting that they can be installed in a variety of applications, including conveyors, sheet metal processing equipment, printing and converting machines and industrial robots. They are also easy to install and remove, making them a great choice for maintenance departments.
The TL-A Series also offers a number of high-end features such as a reversible shaft design and internal springs to ensure complete disengagement. They also include a hard-chrome detent interface that decreases drive-ring wear. The TL-A Series also features a single-flex coupling that delivers high shaft misalignment protection and a double-flex coupling that delivers high torsional rigidity.
TL Series torque converters are a good fit for applications that require torque in the sub-tens of thousands of pounds per square inch. They are also a good choice for industrial automation applications and can be installed in a wide variety of industries, including manufacturing, aerospace and automotive.

IWIS FT series

FT IWIS’s FT-1000 Series aka FT IWIS’s FT t1000 series aka the FT t1000 series aka the TFT-1000 series aka the FT t1000 aka the FT t1000 FT t1000 series aka the FFT1000 series aka the FFT1000 FT t1000 aka the FFT1000 series aka FT t1000 FT t1000 FT t1000?. The FT t1000 series aka the, FT t1000 series aka the, FFT t1000 series aka the, FFT t1000 series aka FT t1000 series aka the, etc.. FT t1000 series aka the,, FFT t1000 series aka FFT t1000 series aka the FFT t1000 series aka the,.. FFT t1000 series aka the,, FT t1000 series aka FFT, FT t1000 series aka FT, FT t1000 series TA t1000 series aka the FFT, FT t1000 series, FT t1000 series aka, FFT t1000 series aka, FFT, FT t1000 series, etc.

TL-IT inline

TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.

editor by czh

Model Number: T40B
Type: Torque sensor
Output: ±5/±30/±120 kHz/±10 V
Description: Torque Transducers
Nominal Torque: 50 to 10000 Nm
Accuracy class: 0.05 / 0.1
Sensitivity tolerance: <±0.1%
Nominal temperature range: -20 to +85°C
Static limit load: 160%
Static breaking load: 320%
Maximum permissible speed: Max. 2000 RPM
Material: Stainless steel
Packaging Details: To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Port: ZheJiang , China

Technical Data

Product Name

Torque Transducers

Company Profile ZheJiang PACO Sci. & Tech Development Co., Ltd was established in 2004. Our main products include flow meter, metering gear pump, sensors and transmitters, data acquisition system, frequency transformer and color change system. We are the distributor of POMTAVA.S.A (Switzerland), KEM (Germany), HBM (Germany) and Yasukawa （Japan）. Our customers mainly focus on automotive industry, wind power industry, solar energy industry, new energy battery industry and construction machinery industry. The main application focus on automotive testing, automotive painting, glue metering, high accuracy 2K system and so on. We have been recognized by many customers in relevant fields, and become a qualified supplier of many well-known enterprises. We established a good cooperative relationship with them. After years of development, our company has established an excellent team of cooperation. In the agent sales of various imported products, we can also provide to our customers with perfect related products before-sales and after-sales service. We also have ability to assist customers in part of the system development and design. Packing & Shipping FAQ Q1:Could I have prices of your products?A1:Welcome. Please feel free to send us an email here. You will get our reply in 24 hours.Q2:Can we print our logo/website/company name on products?A2:Yes, MOQ 1Pcs.Q3:What’s the lead time for regular order?A3:15 days for order quantity lower than 1Pcs.Q4:Can I get a discount?A4:Yes, for the order quantity more than 10Pcs, please contact us to get the best price.Q5:Do you inspect the finished products?A5:Yes, each step of production and finished products will be came out inspection by QC department before shipping.

Choosing the Right Limiter Torque

Choosing the right limiter torque is crucial to your safety and that of your loved ones. There are many factors that go into selecting the right limiter, and you need to take them into consideration before making your final decision.

Mechanical

Using mechanical limiter torque is an ideal solution for protecting machinery and equipment from excessive torque. Overloads can lead to downtime and expensive repairs. This is because overloads occur when forces exceed the design limits of the mechanism.
Mechanical limiter torque is designed to limit the output of the drive to a predetermined value. This means that when the torque exceeds the specified value, the device will disengage from the driven device. This allows the system to coast to a stop.
Mechanical torque limiters are available in a wide range of sizes and can be used in virtually any application. They can be used in assembly lines, printing and converting machines, conveyors, industrial robots, and sheet metal processing equipment.
There are two main types of mechanical limiter torque: shear pin and ball detent. Shear pin torque limiters use metal pins to couple two rotating bodies. The drive pawl is held in place by a spring. Ball detent torque limiters use a series of balls to transmit torque. Both have evolved from simple slip-clutch designs.
Mechanical torque limiters are designed to provide a quick disengagement within milliseconds when torque overload conditions occur. They also provide a high level of accuracy and sensitivity. They can handle torque ranges of 40 to 24,000 in-lbs.
Mechanical limiter torque can be reset automatically or manually. Some of the newer devices utilize special springs with negative spring rates. This allows the device to re-engage more quickly and easily when an overload condition occurs. The spring rate also eliminates breathing and false trips.
The design of a mechanical torque limiter has evolved from a basic shear-pin or slip-clutch design. The new devices are more accurate and have less impact on the drive system. They also offer high sensitivity and a high level of safety.
There are also several types of mechanical overload devices. Some of these devices use a single screw to adjust the release torque. Others have a ratcheting mechanism. Some are even flexible couplings that allow for small angular misalignments and parallel offsets.
Choosing the right torque limiter is an easy way to protect machinery and equipment from overloads. With a range of designs to choose from, the right mechanical limiter can provide overload protection at an affordable price.

Electrical

Using an electrical limiter torque device is an ideal way to increase the reliability of electromechanical actuators, particularly when it comes to power transmission applications. These devices help dissipate rotational energy without causing damage to the driven device. They can be used in a wide variety of applications, including robotics and gear driving systems.
When selecting a torque limiter, it’s important to choose one that meets your application’s needs. There are many types of limiters on the market, and each has its own benefits.
The main advantage of an electronic limiter is that it can monitor and control torque overload. However, these devices are a bit cumbersome, and you will have to install many sensors and devices to make sure that the system is running properly.
Torque limiters are also useful in cases where the driven device cannot absorb the full output torque. For example, if the motor drives a bottle capping machine, the motor may not be able to fully absorb the torque, and the torque limiter must be used.
An electronic limiter torque device is not as effective as a mechanical one. In many cases, the motor controller may receive feedback from the shaft during an overload, but it will not immediately stop the over-torque part of the system.
Torque limiters are also important for protecting the drive train from overload. An electronic signal can shut down the over-torque part of the drive system, and a limit switch is often included in the package. This allows the drive train to be tested automatically for proper operation.
The most important feature of a torque limiter is its ability to separate the load from the drive. It can reduce the size of a drive train, as well as increase the efficiency of an electromechanical actuator.
In some cases, an electronic limiter is able to act like a fusing mechanism, automatically resetting itself when it detects an overload. However, a mechanical one is usually the better choice for most applications.
Torque limiters come in a wide range of sizes and styles. For example, there are ball detent type limiters, which may have compression adjustment or multiple detent positions. There are also synchronous magnetic, pawl and spring, and shear pin types.

Disconnect types

Several types of disconnect torque limiters are available on the market. Some are electrical and require sensors to be installed, while others are mechanical and require no special devices.
Mechanical torque limiters are a cheaper option. They offer better protection than most electrical methods and are less prone to premature wear. They can be installed in a wide variety of applications. They can protect machinery with rotating components, including gearboxes, pulleys, conveyors and assembly lines.
Mechanical torque limiters can be either friction or magnetic. The friction type has spring loaded friction disks that slip against each other when the torque reaches a certain threshold. The magnetic type uses a magnetically susceptible material to create a magnetic particle clutch.
Both types of torque limiters are designed to protect machinery from mechanical overload. Choosing the right type will ensure protection at a reasonable price. Mechanical torque limiters offer a faster response time and better protection than electronic methods.
The friction type works like an automobile clutch. When the torque reaches a certain threshold, friction disks slip against each other to allow the torque to be transmitted. Mechanical friction limiters can be customized with a variety of outputs. They can also be adjusted manually. They are best suited for applications that experience a torque variance of less than 10%.
A torque limiter is used in industrial robots to prevent damage. They are also used in woodworking machines, printing and converting machines, and conveyors. They provide complete operational safety and offer long service life. Torque limiters are also used in assembly lines. They can prevent larger incidents by limiting damage from crash stops and jams.
Torque limiters come in a variety of designs, including pawl and spring, shear pin, and ball detent. The main difference between the types is how they disconnect.
Pawl and spring methods use springs to hold a drive pawl in place against the rotor. Shear pins are the most commonly used type of disconnect torque limiter. They are inexpensive to produce and reliable. However, they can be difficult to control accurately.
Ball detent type limiters use hardened balls or rollers in sockets that force the drive and driven elements apart when torque reaches a certain threshold. Ball detent limiters may need to be reset manually or automatically.

Placement

Having a torque limiter on your machine can prevent damage to your components and your machine from overloading. They also protect the motor and the gearbox from jams. They reduce the torque required to move a conveyor or prime mover.
Torque limiters are found in all kinds of machine and processing equipment. They are especially useful in systems that require human interaction. They eliminate downtime caused by damaged components and eliminate the need for replacement parts. They are also ideal for applications that have a +/- 10% variance in torque.
Torque limiters typically include a spring-preload control element that uses special methods to limit the backlash that can occur between a drive element and a control element. Some systems also offer a random reset device that allows the operator to choose a new setting to reduce the risk of overload.
Another type of torque limiter is a friction type. This is a simple, low-cost method of overload protection. Unlike a shear pin, which requires lubrication, a friction type torque limiter operates much more accurately. When an overload occurs, the device breaks free before it hurts something. They are also more dependable than shear pins. The teeth on a friction torque limiter are aligned to mesh with each other and they are usually made of metal. They can also have bronze bushings for added strength.
Electromagnetic torque systems are similar to pneumatic torque systems, but they use electric current to energize a magnetic coil. They are also spring-set. This type of torque limiter is more reliable than a pneumatic one. It also has fast switching functions.
Torque limiters are usually found in industrial facilities, but they are also found in many commercial and consumer applications. Torque limiters can be used to couple gears, sprockets, motors, and even pumps. The size of the torque limiter will depend on the torque load and the machine cycle requirements. Some torque limiters are made to fit a single shaft, while others are made to couple several. Some types of torque limiters are made with a keyless locking mechanism to reduce the risk of backlash.

editor by czh